The Online Books Page

Supersonic transport planes -- Materials -- Testing

See also what's at your library, or elsewhere.

• Supersonic transport planes -- Materials
• Materials -- Testing

• Supersonic transport planes -- Materials -- Environmental testing

• Fatigue of notched Ti-8Al-1Mo-1V titanium alloy at room temperature and 550⁰ F (560⁰ K) with flight-by-flight loading representative of a supersonic transport (National Aeronautics and Space Administration ;, 1969), by L. A. Imig, Walter Illg, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Influence of various fabrication methods on the compressive strength of titanium skin-stringer panels (National Aeronautics and Space Administration ;, 1969), by Richard A. Pride, James E. Gardner, Dick M. Royster, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Strain-rate sensitivity of three titanium-alloy sheet materials after prolonged exposure at 550 ̊F (561 ̊K) (National Aeronautics and Space Administration ;, 1969), by Robert M. Baucom, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Fatigue-test acceleration with flight-by-flight loading and heating to simulate supersonic-transport operation (National Aeronautics and Space Administration ;, 1973), by L. A. Imig, L. E. Garrett, and Langley Research Center (page images at HathiTrust)

• Tensile properties and creep strength of three aluminum alloys exposed up to 25,000 hours at 200 ̊to 400 ̊F (370 ̊to 480 ̊K) (National Aeronautics and Space Administration ;, 1969), by Dick M. Royster, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport (National Aeronautics and Space Administration ;, 1968), by Richard A. Pride and Langley Research Center (page images at HathiTrust)
• Coatings and surface treatments for longtime protection of Ti-8Al-1Mo-1V alloy sheet from hot-salt stress corrosion (National Aeronautics and Space Administration ;, 1968), by Bland A. Stein, Dick M. Royster, H. Benson Dexter, and Langley Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Fatigue behavior of Ti-8A1-1Mo-1V sheet in a simulated wing structure under the environment of a supersonic transport (National Aeronautics and Space Administration, 1965), by John J. Peterson (page images at HathiTrust; US access only)

• Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport (National Aeronautics and Space Administration ;, 1968), by Richard A. Pride and Langley Research Center (page images at HathiTrust)

• Accelerated Aging: Photochemical and Thermal Aspects (Los Angeles: Getty Conservation Institute, 1994), by Robert L. Feller (PDF and page images at getty.edu and Google)
• The Digest of physical tests and laboratory practice. (F. A. Riehlé., 1896), by Joseph W. Bramwell (page images at HathiTrust)
• Proceedings. (American Society for Testing and Materials., 1899), by American Society for Testing and Materials (page images at HathiTrust)
• Charles J. Cleary awards for papers on material sciences (Published for Directorate of Materials and Processes, Aeronautical Systems Division, Wright-Patterson Air Force Base, Ohio, 1967), by Air Force Materials Laboratory (U.S.) and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes (page images at HathiTrust)
• Materials research abstracts, a review of the Air Force materials research and development. (Published for Directorate of Materials and Processes, Aeronautical Systems Division, Wright-Patterson Air Force Base, Ohio, 1962), by Library of Congress. Science and Technology Division, Charles D. Thibault, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes (page images at HathiTrust)
• Laboratory manual of materials testing (Macmillan, 1952), by Richard T. Liddicoat and Philip Orland Potts (page images at HathiTrust)
• Techniques of analysis of load-displacement records by J-integral methods (The Commission :, 1980), by H. A. Ernst, P. C. Paris, U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research, and Mo.). Center for Fracture Mechanics Washington University (Saint Louis (page images at HathiTrust)
• Material evaluation study : Ballast and Foundation Materials Research Program (Federal Railroad Administration, Office of Research and Development ;, 1977), by R. M. Knutson and University of Illinois at Urbana-Champaign. Department of Civil Engineering (page images at HathiTrust)
• Program to develop acoustic emission-flaw relationship for inservice monitoring of nuclear pressure vessels : progress report, February 1-July 1, 1977 (Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research, 1977), by P. H. Hutton, E. B. Schwenk, Pacific Northwest Laboratory, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Experiments with materials and products of industry. (McKnight & McKnight Pub. Co., 1960), by Arthur W. Earl (page images at HathiTrust)
• Die Kegelprobe. Ein neues Verfahren zur Härtebestimmung von Materialien. (J. Springer, 1908), by Paul Ludwik (page images at HathiTrust; US access only)
• Das Materialprüfungswesen, unter besonderer Berücksichtigung der am Staatl. Materialprüfungsamte zu Berlin-Dahlem üblichen Verfahren im Grundriss Dargestellt. (F Enke, 1924), by Friedrich Willy Hinrichsen, Karl Memmler, and Prussia (Germany). Materialprüfungsamt (page images at HathiTrust; US access only)
• Charles J. Cleary awards for papers on material sciences ([Washington] : Science and Technology Division, Library of Congress, 1962., 1962), by Lynn E. Catoe, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Library of Congress. Science and Technology Division (page images at HathiTrust)
• Selected values of the physical properties of various materials (Argonne National Laboratory, 1958), by Tebo. F. J., U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)
• Symposium on physics and nondestructive testing (Argonne National Laboratory, 1960), by Argonne National Laboratory and U.S. Atomic Energy Commission (page images at HathiTrust)
• Proceedings (Philadelphia, 1899), by American Society for Testing Materials (page images at HathiTrust)
• Apparatus for determining linear thermal expansions of materials in vacuum or controlled atmosphere (Oak Ridge National Laboratory, 1960), by S. D. Fulkerson, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• ASTM manual on quality control of materials (American Society for Testing Materials, 1951), by ASTM Committee E-11 on Quality Control of Materials (page images at HathiTrust)
• Sixth congress of the International association for testing materials : held in New York, Sept. 3-7, 1912. ... Illued by the International association for testing materials, General sec. office. (E.&F.N. Spon ;, 1912), by International association for testing materials (6th congress : 1912 : N.Y) (page images at HathiTrust)
• Experimental engineering and manual for testing. For engineers and for students in engineering laboratories. (J. Wiley & Sons, 1910), by Rolla C. Carpenter (page images at HathiTrust)
• Proceedings of the annual meeting - American Society for Testing Materials. (American Society for Testing Materials., 1902), by American Society for Testing Materials (page images at HathiTrust)
• Handbuch der Materialienkunde für den Maschinenbau. (J. Springer, 1912), by Adolf Martens and E. Heyn (page images at HathiTrust; US access only)
• Modern installation for testing of large assemblies under static and fatigue loading. Description of installation at Fritz Engineering laboratory, Lehigh University, Bethlehem, Pennsylvania (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by Bruno Thürlimann and W. J. Eney (page images at HathiTrust)
• Evaluation of long term gas corrosion of heat resistant alloys for use as gas-cooled reactor fuel cladding (Aerojet-General Corporation, Aerojet-General Nucleonics, 1963), by J. S. Brunhouse, G. W. Titus, and Aerojet-General Corporatio Aerojet-General Nucleonics (page images at HathiTrust)
• Proceedings - American Society for Testing and Materials. (American Society for Testing and Materials., 1961), by American Society for Testing and Materials (page images at HathiTrust)
• Testing methods and techniques : strength of materials and components: a compilation. (National Aeronautics and Space Administration ; [For sale by the National Technical Information Series, Springfield, Va.], 1971), by United States. National Aeronautics and Space Administration. Technology Utilization Office (page images at HathiTrust)
• Effects of specimen preparation on the accuracy of electromagnetic property measurements of solid materials with an automatic network analyzer (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1986), by Edward R. Long and Langley Research Center (page images at HathiTrust)
• Properties of large 7079 aluminum alloy forgings in a cryogenic environment (National Aeronautics and Space Administration, 1966), by F. T. Inouye (page images at HathiTrust)
• Analytical techniques and instrumentation. (National Aeronautics and Space Administration. Technology Utilization Office.), by United States. National Aeronautics and Space Administration. Technology Utilization Office (page images at HathiTrust)
• Decontamination and corrosion resistance properties of selected laboratory surfaces (U.S. Atomic Energy Commission, Technical Information Service, 1951), by C. D. Watson, G. A. West, T. H. Handley, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• High temperature testing of type 316 stainless steel sheet : final report (Cornell Aeronautical Laboratory, inc., 1951), by G. J. Guarnieri, Union Carbide and Carbon Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The measurement of thermal properties of non-metallic materials at high temperatures. No.2 progress report (North Carolina State College., 1951), by Ferrell J. K. (James K.), W. T. Lewish, A. A. Jr Armstrong, K. O. Beatty, Finch E. B., U.S. Atomic Energy Commission, and North Carolina State College. Department of Engineering Research (page images at HathiTrust)
• Preparation of high purity magnesium and a study of the effect of non-metallic and alkali metal impurities on the corrosion characteristics of pure magnesium. (Dow Chemical Company, 1949), by U.S. Atomic Energy Commission (page images at HathiTrust)
• Nondestructive inspection of EBR-II fuel-jacket tubing using electromagnetic techniques (Argonne National Laboratory, Special Materials and Services Division, 1967), by Thomas H. Busse, Norman S. Beyer, D. R. Wood, U.S. Atomic Energy Commission, and Argonne National Laboratory. Special Materials and Services Division (page images at HathiTrust)
• Inelastic design of load carrying members. ([Urbana, 1960), by University of Illinois (Urbana-Champaign campus). Dept. of Theoretical and Applied Mechanics (page images at HathiTrust)
• Microbiological deterioration of organic materials, its prevention and methods of test. (U.S. Govt. Print. Off., 1948), by Edward Abrams (page images at HathiTrust)
• A new brittleness test for powder metallurgy materials (Los Alamos Scientific Laboratory of the University of California, 1963), by William H. Lenz, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Influence of rate of loading on the tensile properties of normal alpha uranium (Ames Laboratory, Iowa State University of Science and Technology, 1963), by Philip Arthur Laretan, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• ASTM standards 1918: issued triennially (Published by the American Society for Testing Materials, 1918), by American Society for Testing and Materials and International Association for Testing Materials (page images at HathiTrust)
• Behavior of flexible cylinders buried in sand under static and dynamic loading (U.S. Army Engineer Waterways Experiment Station, 1968), by Gayle E. Albritton (page images at HathiTrust)
• ASTM standards 1916: issued biennially (Published by the American Society for Testing Materials, 1916), by American Society for Testing and Materials and International Association for Testing Materials (page images at HathiTrust)
• ASTM standards 1921: issued triennially (Published by the American Society for Testing Materials, 1921), by American Society for Testing and Materials (page images at HathiTrust)
• Policy of the National Bureau of Standards with regard to tests for agencies outside the bureau. (U.S. Dept. of Commerce, National Bureau of Standards, 1935), by United States. National Bureau of Standards (page images at HathiTrust)
• Evaluation of Sod Saver Blocks and M.C. Gill panels for tactical bridge access/egress applications (The Station ;, 1982), by Dave A. Ellison, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Proceedings of Symposium on Structural Dynamics under High Impulse Loading. (Flight Dynamics Laboratory, Air Force Systems Command, 1963), by Ohio) Symposium on Structural Dynamics under High Impulse Loading (1962 : Dayton (page images at HathiTrust)
• Electrical and electronic properties of materials: information retrieval program. (Directorate of Materials and Processes, Aeronautical Systems' Division, Air Force Systems Command, 1962), by Hughes Aircraft Company and H. Thayne Johnson (page images at HathiTrust; US access only)
• The results of ultrasonic testing in the practice of machine and boiler construction concerning the material and strength properties of components (U.S. Atomic Energy Commission, Division of Technical Information ;, 1967), by Hans Juergen Meyer, U.S. Atomic Energy Commission, Technische Hochschule Darmstadt, and Oak Ridge National Laboratory (page images at HathiTrust)
• Analytical techniques and instrumentation; a compilation. (National Aeronautics and Space Administration;, 1974), by United States. National Aeronautics and Space Administration. Technology Utilization Office (page images at HathiTrust)
• Methodology for predicting the life of waste-package materials and components using multifactor accelerated life tests (Office of Nuclear Waste Isolation, Battelle Memorial Institute ;, 1983), by Ralph E. Thomas, Roger W. Cote, and Battelle Memorial Institute. Office of Nuclear Waste Isolation (page images at HathiTrust)
• The measurement of thermal properties of non-metallic materials at high temperatures. No. 4 Progress report covering period ending December 31, 1952 (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service, 1953., 1953), by Finch E. B., K. O. Beatty, U.S. Atomic Energy Commission, and North Carolina State College. Department of Engineering Research (page images at HathiTrust)
• Fabrication of UO2-stainless steel dispersion fuel for BORAX-V nuclear superheat (Argonne National Laboratory, Metallurgy Division, 1963), by W. C. Kramer, C. H. Bean, and Argonne National Laboratory (page images at HathiTrust)
• Metallurgy Division quarterly report: October, November, and December 1957 (Argonne National Laboratory, Metallurgy Division, 1958), by Frank G. Foote and Argonne National Laboratory (page images at HathiTrust)
• Second Symposium on Physics and Nondestructive Testing : held at Argonne National Laboratory October 3, 4, 5, 1961 (Argonne National Laboratory, 1961), by Symposium on Physics and Nondestructive Testing (2nd : 1961 : Argonne National Laboratory), Roberta Ann Di Novi, Warren J. McGonnagle, Argonne National Laboratory. Nondestructive Testing Group, and Argonne National Laboratory (page images at HathiTrust)
• Progress in nondestructive testing : a summary of Hanford achievements in these programs under General Electric, 1952-1964 (Hanford Atomic Products Operation, 1964), by D. C. Worlton, Hanford Atomic Products Operation, Pacific Northwest Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Metallurgy Division quarterly report: January, February, and March, 1957 (Argonne National Laboratory, Metallurgy Division, 1957), by Frank G. Foote and Argonne National Laboratory (page images at HathiTrust)
• Metallurgy Division quarterly report: July, August and September 1957 (Argonne National Laboratory, Metallurgy Division, 1958), by Frank G. Foote and Argonne National Laboratory (page images at HathiTrust)
• Initial testing and operation of the Argonne Low Power Reactor (ALPR) (Argonne National Laboratory, Reactor Engineering Division, 1959), by Eberhard E. Hamer and Argonne National Laboratory (page images at HathiTrust)
• Program to develop acoustic emission flaw relationship for inservice monitoring of nuclear pressure vessels : progress report, October 1, 1977-January 1, 1978 (Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research ;, 1978), by P. H. Hutton, C. Pavloff, E. B. Schwenk, R. J. Kurtz, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Book of ASTM standards including tentatives 1949. (Published by the American Society for Testing Materials, 1949), by American Society for Testing and Materials (page images at HathiTrust)
• Book of ASTM standards including tentative standards 1942. (Published by the American Society for Testing Materials, 1942), by American Society for Testing and Materials (page images at HathiTrust)
• Book of ASTM standards including tentatives 1952. (Published by the American Society for Testing Materials, 1952), by American Society for Testing and Materials (page images at HathiTrust)
• Book of ASTM standards including tentative standards 1939. (Published by the American Society for Testing Materials, 1939), by American Society for Testing and Materials (page images at HathiTrust)
• Book of ASTM standards including tentative standards 1944. (Published by the American Society for Testing Materials, 1944), by American Society for Testing and Materials (page images at HathiTrust)
• Book of ASTM standards including tentatives 1946. (Published by the American Society for Testing Materials, 1946), by American Society for Testing and Materials (page images at HathiTrust)
• Symposium on Materials Performance in Operating Nuclear Systems : containing papers presented August 28-30, 1973 at Iowa State University, Ames, Iowa (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Office of Information Services, Technical Information Center, 1973., 1973), by Ames) Symposium on Materials Performance in Operating Nuclear Systems (1973 : Iowa State University, William Howard Smith, Monroe Wechsler, U.S. Atomic Energy Commission. Division of Technical Information, Ames Laboratory, American Nuclear Society. Materials Science and Technology Division, and Metallurgical Society of AIME. Nuclear Metallurgy Committee (page images at HathiTrust)
• Fabrication of spiked-core fuel elements for the experimental boiling water reactor. Final Report (Argonne, Ill. : Argonne National Laboratory, 1965., 1965), by W. C. Kramer, R. A. Noland, C. H. Bean, R. A. Beatty, F. D. McCuaig, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)
• Friction and wear screening tests of materials in sodium (Canoga Park, California : Atomics International, Liquid Metal Engineering Center, 1970., 1970), by Nathan J. Hoffman, J. J. Droher, D. E. Goggin, U.S. Atomic Energy Commission, North American Rockwell Corporation. Atomics International Division, and Liquid Metal Engineering Center (U.S.) (page images at HathiTrust)
• Space nuclear safety and fuels program : January 1981 (Los Alamos, New Mexico : Los Alamos National Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Milliwatt Generator Project : October 1980-March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by W. J. Maraman, W. A. Jr Stark, G. H. Rinehart, T. H. Feiertag, C. C. Land, C. E. Frantz, R. A. Kent, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Space nuclear safety and fuels program : March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Space nuclear safety and fuels program : April 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Milliwatt generator project : April-September 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by W. J. Maraman, W. A. Jr Stark, G. H. Rinehart, T. H. Feiertag, C. C. Land, C. E. Frantz, R. A. Kent, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• A review of the Air Force materials research and development program (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by Helen E. Hines, Ruth F. Walden, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• A review of the Air Force materials research and development program (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957, 1957), by Helen E. Hines, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• A review of the Air Force materials research and development program (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959, 1959), by Helen H. Maxwell, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• A review of the Air Force materials research and development program (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1961, 1961), by Donna J. Tate, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• A review of the Air Force materials research and development program (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1962, 1962), by Junie J. Banks, Donna J. Tate, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Critical survey of mechanical property test : methods for brittle materials (Wright-Patterson Air Force Base, Ohio : Air Force Systems Command, Aeronautical Systems Division, AF Materials Laboratory, 1963., 1963), by William B. Shook, United States. Air Force. Systems Command. Aeronautical Systems Division, Ohio State University. Engineering Experiment Station, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Abstracts of AF Materials Laboratory reports : January 1968-December 1968 (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Materials Support Division, Air Force Systems Command, United States Air Force, 1969., 1969), by Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Evaluation of a biaxial test fixture : interim report for period April 1981-October 1982 (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1983., 1983), by James A. Holst, Air Force Flight Dynamics Laboratory (U.S.), and Air Force Wright Aeronautical Laboratories (page images at HathiTrust)
• Abstracts of AF Materials Laboratory reports : July 1966-December 1966 / Air Force Materials Laboratory (U.S.). (Wright-Patterson Air Force Base, Ohio, Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by Air Force Materials Laboratory (U.S.). compiler and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Abstracts of AF Materials Laboratory reports : January 1967-December 1967 (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1968., 1968), by Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Book of ASTM standards including tentatives 1955. (Published by the American Society for Testing Materials, 1955), by American Society for Testing and Materials (page images at HathiTrust; US access only)
• Effect of end conditions on the collapse load of members (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1961., 1961), by G. A. Costello, Eugene Pocs, Omar M. Sidebottom, United States. Air Force. Air Research and Development Command, United States. Wright Air Development Division, and University of Illinois (Urbana-Champaign campus). Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• Inelastic design of load carrying members, Part V, Theoretical and experimental creep analyses of beam-columns (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Omar M. Sidebottom, United States. Air Force. Systems Command. Aeronautical Systems Division, and University of Illinois (Urbana-Champaign campus). Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• Theoretical and experimental analysis of circular cross-section torsion-tension members made of materials that creep (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1961., 1961), by Dharmarajan. S., Omar M. Sidebottom, United States. Air Force. Air Research and Development Command, United States. Wright Air Development Division, and University of Illinois (Urbana-Champaign campus). Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• Engineering and scientific papers (The University], 1919), by Columbia University. School of Chemistry and Columbia University. School of Engineering and Applied Sciences (page images at HathiTrust)
• Review of sonic methods for the determination of mechanical properties of solid materials (Urbana, Illinois : Engineering Experiment Station, University of Illinois at Urbana-Champaign, 1954., 1954), by Clyde E. Kesler, Tien S. Chang, University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics, and University of Illinois at Urbana-Champaign. Engineering Experiment Station (page images at HathiTrust; US access only)
• Parts, materials, and processes experience summary (National Aeronautics and Space Administration, 1972), by Ames Research Center and Lockheed Missiles and Space Company (page images at HathiTrust)
• Abstracts of AF Materials Laboratory reports, July 1965-June 1966. (Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, 1967), by Air Force Materials Laboratory (U.S.) Research and Technology Division (page images at HathiTrust)

More items available under broader and related terms at left.