Testing equipmentSee also what's at your library, or elsewhere.
|
Filed under: Testing equipment Vehicles in use, and state compulsion vehicle inspection. Final report. Volume II. (1970), by F. B. Oldham (page images at HathiTrust) Feasibility study of trailer techniques for tire traction. Volume 1. Summary. Final report. (1973), by A. F. Ramsey, S. R. Sacia, and J. D. Eagleburger (page images at HathiTrust) The influence of tire properties on passenger vehicle handling. Volume IV - appendices F - H. Final report. (1975), by R. D. Roland, R. S. Rice, and A. F. Brayman (page images at HathiTrust) Passenger vehicle and light-truck braking systems inspection equipment - phase II. Volume I. Summary report. Final report. (1975), by T. W. Keranen, A. E. Sisson, T. J. Hemak, and P. Bounds (page images at HathiTrust) Vehicle exteriors and pedestrian injury prevention. Volume IV. Drop tests of dummies on a mock vehicle exterior. Final report. (1975), by Hayes E. Ross, M. C. White, R. D. Young, and W. F. Lammert (page images at HathiTrust) Uniform tire quality grading - traction validation program. II. Verification of concrete and asphalt pads for UTQG at Goodfellow AFB, San Angelo, Texas. Final report. (1975), by A. H. Neill (page images at HathiTrust) Vehicle exteriors and pedestrian injury prevention. Volume V. A 3-D math simulation of a crash victim - extension and validation study. Final report. (1975), by R. D. Young, W. F. Lammert, and Hayes E. Ross (page images at HathiTrust) Tire parameter determination. Volume II - technical report: part 1. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Pavement friction test tire correlation. Final report. (1975), by R. R. Hegmon, S. Weiner, and L. J. Runt (page images at HathiTrust) Tire parameter determination. Volume IV - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Effect of rate of change of slip on the peak braking coefficient of passenger car tires. Technical report. (1977), by Pat L. Boyd and W. H. Walston (page images at HathiTrust) Tire-pavement interface variability. Volume II - technical report. Final report. (1977), by Gordon G. Hayes (page images at HathiTrust) Diagnostic motor vehicle inspection demonstration projects, program engineering support. Volume 2 - appendix A: evaluation of the measurement performance of inspection equipment in the five demonstration projects and in selected repair agencies. Final report. (1977), by Kenneth P. Joncas (page images at HathiTrust) Correlation of braking system defects and performance inspection. Volume I: summary report. (1979), by J. W. Hodgson and A. J. Edmondson (page images at HathiTrust) Development of a test methodology for evaluating crash compatibility and aggressiveness. Test report 2: 1975 Ford Torino-to-NHTSA test device. (1979), by R. Yee, R. Cropper, and S. Davis (page images at HathiTrust) Development of a test methodology for evaluating crash compatibility and aggressiveness. Test report 4: 1975 Plymouth Fury-to-NHTSA test device. (1979), by R. Yee, R. Cropper, and S. Davis (page images at HathiTrust) Results of energy-loss measurements on passenger car tires operating in the free-rolling and braking/traction modes. Final report. (1980), by L. Bogdan (page images at HathiTrust) Variations in skid resistance over time. Part 1. Final report. (1980), by S. N. Runkle and David C. Mahone (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume I - technical report. Part I. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume II - technical report. Part II. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume III - tabulated data measurements. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume IV - tabulated data measurements. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) A statistical analysis of the variability of the braking efficiency of new, original equipment brake sets installed in the same vehicle. Final report. (1989), by J. L. Bascunana (page images at HathiTrust) Effects on safety of pavement-truck tire interaction. Final report. (1992), by Bohdan T. Kulakowski, James C. Wambold, D. W. Blue, R. R. Blackburn, and Douglas W. Harwood (page images at HathiTrust) Test and evaluation of the Ford/SAE air bag interaction arm. (2001), by Daniel A. Rhule and Matthew Freyhof (page images at HathiTrust) Component degradation braking systems performance. Final report. Technical. (1969), by D. Q. Bellinger and R. J. Zenko (page images at HathiTrust) Impact capability of safety glazing materials. Final report. (1970), by Richard N. Pierce and W. R. Blackstone (page images at HathiTrust) Crashworthiness of vehicle structures; passenger car roof structures. Final report. (1971), by Robert A. Carl and George K. Williams (page images at HathiTrust) Preliminary vehicle tests - inflatable occupant restraint systems. Volume III - test procedures and instrumentation. Final report. (1971), by J. F. Martin and D. J. Romeo (page images at HathiTrust) Test procedures and requirements for door system evaluation. Final report. (1971), by E. S. Dale and L. D. Seal (page images at HathiTrust) Application study of ultrasonic nondestructive inspection for tire compliance testing. Final report. (1971), by Richard N. Pierce (page images at HathiTrust) Feasibility study of trailer techniques for tire traction. Volume 2. Technical. Final report. (1973), by A. F. Ramsey, S. R. Sacia, and J. D. Eagleburger (page images at HathiTrust) Pilot field test and evaluation center. Final report. (1972), by Don L. Ivey (page images at HathiTrust) Basic research in crashworthiness II - experimental validation study of the analytical predictive techniques for the large deflection dynamic analysis of plane elasto-plastic frame structures. Interim technical report. (1973), by R. C. Shieh (page images at HathiTrust) Passenger vehicle and light-truck braking systems inspection equipment - phase I, volume I. Summary final report. (1973), by T. W. Karanen, A. E. Sisson, and P. Bounds (page images at HathiTrust) The influence of tire properties on passenger vehicle handling. Volume I - summary report. Final report. (1975), by R. D. Roland, R. S. Rice, and F. Dell-Amico (page images at HathiTrust) The influence of tire properties on passenger vehicle handling. Volume II - technical report. Final report. (1975), by R. D. Roland, R. S. Rice, and F. Dell-Amico (page images at HathiTrust) The influence of tire properties on passenger vehicle handling. Volume V - measured tire performance data. Final report. (1975), by R. D. Roland and D. T. Kunkel (page images at HathiTrust) Passenger vehicle and light-truck braking systems inspection equipment - phase II. Volume II. Technical report. Final report. (1975), by T. W. Keranen, A. E. Sisson, T. J. Hemak, and P. Bounds (page images at HathiTrust) Vehicle exteriors and pedestrian injury prevention. Volume I. Summary report. Final report. (1975), by Hayes E. Ross, R. D. Young, A. M. Mayyasi, and Thomas A. Krouskop (page images at HathiTrust) Nondestructive testing system for retreads. Final report. (1975), by Henry H. Bessler, S. N. Bobo, M. J. Lourenco, and W. R. Wade (page images at HathiTrust) Rolling resistance of tires measured under transient and equilibrium conditions on Calspan's tire research. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume I - summary. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume III - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume V - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume VI - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume VII - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume VIII - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Tire parameter determination. Volume IX - technical report, part 2. Final report. (1976), by D. J. Schuring (page images at HathiTrust) Rolling resistance forces in pneumatic tires. Interim report. (1976), by Samuel K. Clark (page images at HathiTrust) Tire break-in procedures for handling tests. Summary report. (1977), by J. E. Martinez and Wayne C. Faatz (page images at HathiTrust) Tire break-in procedures for handling tests. Final report. (1977), by J. E. Martinez and Wayne C. Faatz (page images at HathiTrust) A comparison of tire traction test methods: mobile tire traction dynamometer vs instrumented passenger car. Technical report. (1977), by A. H. Neill and John A. Hinch (page images at HathiTrust) Safety helmet performance investigation. Volume II. Final report. (1977), by T. D. Dunham, A. Nagy, and S. B. Hugg (page images at HathiTrust) Tire-pavement interface variability. Volume I - summary report. Final report. (1977), by Gordon G. Hayes (page images at HathiTrust) Diagnostic motor vehicle inspection demonstration projects, program engineering support. Volume 9 - appendix H: vehicle designs that facilitate or hinder inspection and repair and interchangeability and interface capability of test equipment and vehicles. Final report. (1977), by Kenneth P. Joncas (page images at HathiTrust) Using an outflow meter to predict braking traction speed gradients as a function of surface tension. Technical report. (1977), by John A. Hinch (page images at HathiTrust) Automatic tread gaging machine. Technical report. (1977), by G. S. Ludwig, F. Cecil Brenner, and C. Conley (page images at HathiTrust) The traction generating potential of snow tires vs. regular tread tires on ice, snow, wet, and dry surfaces. Technical report. (1978), by A. H. Neill, A. Kondo, John A. Hinch, and Pat L. Boyd (page images at HathiTrust) Relationship of locked wheel friction to that of other test modes. Final report. (1977), by V. R. Shah and John J. Henry (page images at HathiTrust) Effect of tire wear on skid resistance. Final report. (1977), by I. Gusakov, G. A. Tapia, and L. Bogdan (page images at HathiTrust) Rolling resistance of truck tires as measured under equilibrium and transient conditions on Calspan's tire research facility. Final report. (1977), by I. Gusakov, D. J. Schuring, and D. Kunkel (page images at HathiTrust) Validation of standard surface reproducibility. Final report. (1977), by J. E. Shearer and R. D. Van Arnam (page images at HathiTrust) Evaluation of diagnostic analysis and test equipment for small automotive repair establishments. A report to the Congress. (Government Printing Office, Washington, D.C., 1978) (page images at HathiTrust) Passenger vehicle tire inspection equipment development. Volume I - summary report. (1978), by James E. Johnson, S. B. Hogg, E. C. Schroeder, and R. E. Thomas (page images at HathiTrust) Passenger vehicle tire inspection equipment development. Volume II - technical report. Final report. (1978), by James E. Johnson, S. B. Hogg, E. C. Schroeder, and R. E. Thomas (page images at HathiTrust) Safety helmet performance investigation. Volume I. Final report. (1978), by R. L. Bessey (page images at HathiTrust) Safety helmet performance investigation. Volume II: appendices A through L. Final report. (1978), by R. L. Bessey (page images at HathiTrust) Equilibrium and transient rolling resistance of truck tires measured on Calspan's tire research facility. Final report. (1979), by I. Gusakov, G. A. Tapia, and L. Bogdan (page images at HathiTrust) District of Columbia truck and bus safety demonstration project. Final report. (1978), by E. Rucker and R. Wood (page images at HathiTrust) Correlation of braking system defects and performance inspection. Volume II: technical report. Final report. (1979), by J. W. Hodgson and A. J. Edmondson (page images at HathiTrust) Development of an eddy current noncontact displacement gage for monitoring anthropomorphic dummy chest deflections. Final report. (1978) (page images at HathiTrust) Development of a test methodology for evaluating crash compatibilities and aggressiveness. Volume II: technical report. Final report. (1979), by R. Yee, R. Cropper, S. Davis, and M. Shaw (page images at HathiTrust) Development of a test methodology for evaluating crash compatibility and aggressiveness. Test report 1: 1975 Honda Civic CVCC-to-NHTSA test device. (1979), by R. Yee and S. Davis (page images at HathiTrust) Development of a test methodology for evaluating crash compatibility and aggressiveness. Test report 3: 1975 Volvo 244DL-to-NHTSA test device. (1979), by R. Yee, R. Cropper, and S. Davis (page images at HathiTrust) Development of a test methodology for evaluating crash compatibilities and aggressiveness. Volume I: summary report. Final report. (1979), by S. Davis and R. Yee (page images at HathiTrust) Passenger vehicle tire inspection equipment - volume I: summary. Final report. (1979), by James E. Johnson and C. R. Charbonnet (page images at HathiTrust) Passenger vehicle tire inspection equipment - volume II: technical report. Final report. (1979), by James E. Johnson and C. R. Charbonnet (page images at HathiTrust) Passenger vehicle tire inspection equipment service manual, operation and maintenance. Final report. (1979), by James E. Johnson, C. R. Charbonnet, and C. M. Wood (page images at HathiTrust) Results of rolling resistance measurements on twelve radial passenger car tires. (1980), by C. Brown (page images at HathiTrust) Laboratory and full-scale parametric studies of the rolling resistance of radial- and bias-ply heavy service truck tires. Final report. (1980), by L. Bogdan and R. S. Rice (page images at HathiTrust) Field equipment performance evaluation and equipment condition survey results. Final report. (1980) (page images at HathiTrust) Pavement friction measurements on nontangent sections of roadways. Volume II: comprehensive report. Final report. (1983), by Richard A. Zimmer and R. D. Tonda (page images at HathiTrust) Pavement friction measurements on nontangent sections of roadways. Volume III. Appendices. Final report. (1983), by Richard A. Zimmer and R. D. Tonda (page images at HathiTrust) An evaluation of methods to investigate truck tire wet traction. Final technical report. (1984), by I. Gusakov, R. Rice, S. Publiese, and Robert A. Galganski (page images at HathiTrust) NHTSA Heavy Duty Vehicle Brake Research Program - report no. 5: pneumatic timing. (1985), by Richard W. Radlinski and S. F. Williams (page images at HathiTrust) Reliability and performance of friction measuring tires and friction equipment correlation. Final report. (1990), by T. H. Morrow (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume V - tabulated data measurements. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume VI - tabulated data measurements. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Measurement of tire characteristics for P195/75R14 custom polysteel tires. Volume VII - tabulated data measurements. Final report. (1989), by G. A. Tapia and R. S. Mydzian (page images at HathiTrust) Evaluation of the TAD-50M thorax. Final report. (1994), by Alena Virginia Hagedorn and H. B. Pritz (page images at HathiTrust) Evaluation of Hunter heavy duty plate brake tester. Interim final report. (1995), by Mark A. Flick (page images at HathiTrust) Tests to evaluate B&G Brake Torque tester. Interim final report. (1996), by Mark A. Flick (page images at HathiTrust) Evaluation of infrared brake screening technology: final report. (Washington, D.C.: Federal Motor Carrier Safety Administration, 2000), by Anne-Claire Christiaen and S. J. Shaffer (page images at HathiTrust) Performance-based brake testers: round robin final report. (2000), by S. J. Shaffer and Anne-Claire Christiaen (page images at HathiTrust)
More items available under narrower terms. |