The Online Books Page

Testing/ Measures

See also what's at your library, or elsewhere.

• Innovative inspection techniques /, by Michael J. Goodwin, Edward F. McClave, MAR Incorporated, U.S. Coast Guard Research & Development Center, and Logistics United States. Coast Guard. Office of Engineering (page images at HathiTrust)
• Automotive tape recorder. Volume 2. Development test report. Final report. (1973) (page images at HathiTrust)
• Results of the first semi-annual qualification testing of devices to measure breath alcohol. Interim report. (1975), by Arthur L. Flores (page images at HathiTrust)
• Thermodynamics of bridges, roadways and runways. Final report. (1974), by K. M. Pell, J. E. Nydahl, and V. A. Cundy (page images at HathiTrust)
• Hydraulic characteristics of two bicycle-safe grate inlet designs. Final report. (1974), by Ta-chên Woo and J. Sterling Jones (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
• Performance evaluation of the NHTSA advanced "S" series 50th percentile anthropomorphic dummy. Volume I - technical report. Final report. (1976), by D. E. Massing and P. E. Yates (page images at HathiTrust)
• Regulatory signs for lane occupancy and parking. Final report. (1978), by Donald A. Gordon (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume II - technical report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume III - appendices report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Laboratory evaluation of existing breakaway structures. Volume I: executive summary. Final report. (1980), by J. A. Bloom and John A. Hinch (page images at HathiTrust)
• Acceptance standards for nondestructive test not required by classification (phase I). (1983), by D. Ku and D. Cantore (page images at HathiTrust; US access only)
• Crash padding research. Volume I: material mechanical properties. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
• Development and implementation of a rear vision device test protocol. Volume II - simulated-use testing. Final report. (1987), by William J. Burger and D. Ziedman (page images at HathiTrust)
• Door latch integrity. Final report. (1988), by Donald T. Willke, Michael W. Monk, Lisa K. Sullivan, and D. S. Cohen (page images at HathiTrust)
• Signs on breakaway barricades - wind and crash tests. Final report. (1990), by Thomas D. Davis (page images at HathiTrust)
• Data collection and modeling requirements for assessing transportation impacts of micro-scale design. (2000) (page images at HathiTrust)
• An evaluation of existing tire pressure monitoring systems. (2001), by Paul Arthur Grygier, W. R. Garrott, Elizabeth N. Mazzae, J. D. MacIsaac, Richard L. Hoover, Devin Elsasser, and Thomas A. Ranney (page images at HathiTrust)
• Instrumental color measurement of retroreflective highway sign materials. Final report. (1971), by I. Nimeroff (page images at HathiTrust)
• Performance evaluation of the General Motors Hybrid II anthropomorphic test dummy. Final report. (1973), by J. S. Miller (page images at HathiTrust)
• Automotive disc recorder environmental tests. Final report. (1973), by T. D. Dunham and D. C. Scheidt (page images at HathiTrust)
• Binocular and monocular field of view performance test. Final report. (1974), by A. S. Kuroda and D. S. Boyer (page images at HathiTrust)
• Performance characteristics of anthropomorphic dummy joints. Final technical report. (1974), by Mark P. Haffner and C. H. Melton (page images at HathiTrust)
• Influence of windshield tint on the temperature in automobile passenger compartments. Final report. (1974), by W. S. Hurst and M. G. Scroger (page images at HathiTrust)
• Investigation of electromagnetic interference effects on motor vehicle electronic control and safety devices. Final report. (1975), by R. H. Espeland, L. R. Teters, l. A. Jacobsen, and E. L. Morrison (page images at HathiTrust)
• Inductive loop detectors: theory and practice. Final report. (1976), by C. Pinnell (page images at HathiTrust)
• Performance evaluation of the NHTSA advanced "S" series 50th percentile anthropomorphic dummy. Volume II - accelerator sled test data. Final report. (1976), by D. E. Massing and P. E. Yates (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume I - summary report. Final report. (1977), by V. A. Grasso (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume II - final report. (1977), by V. A. Grasso (page images at HathiTrust)
• Battery explosion tests and labeling. Final report. (1978) (page images at HathiTrust)
• Dynamic testing of luminaire supports with an improved pendulum impact facility. Final report. (1978), by D. B. Chisholm and L. C. Meczkowski (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume I - summary report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Laboratory evaluation of existing breakaway structures. Volume II: technical results. Final report. (1980), by J. A. Bloom and John A. Hinch (page images at HathiTrust)
• Field strength measurements of speed measuring radar units. Interim report. (1981), by Ramon C. Baird, R. L. Lewis, D. P. Kremer, and Stanley B. Kilgore (page images at HathiTrust)
• International conference on wheel/rail load and displacement measurement techniques. Proceedings. (Government Printing Office, Washington, D.C., 1981), by Pin Tong, R. Greif, and 19-20 Jan 1981 International Conference on Wheel/Rail Load and Displacement Measurement Techniques (page images at HathiTrust)
• Improved tank testing methods. (1980) (page images at HathiTrust; US access only)
• Limited electromagnetic interference testing of evidential breath testers. (1983) (page images at HathiTrust)
• Full-scale testing of devices to reduce splash and spray from heavy trucks. Final report. (1985), by Walter A. Johnson, A. C. Stein, and Jeffrey R. Hogue (page images at HathiTrust)
• Nondestructive tests not required by classification (phase II). (1985) (page images at HathiTrust; US access only)
• Cable guiderail tension. Interim report. (1985), by Wayne D. Kenyon (page images at HathiTrust)
• Bridge deck designs for railing impacts. Final report. (1985), by Althea Arnold and T. J. Hirsch (page images at HathiTrust)
• Crash padding research. Volume II: constitutive equation models. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
• Development and implementation of a rear vision device test protocol. Volume I - physical characteristics measurements. Final report. (1987), by William J. Burger and D. Ziedman (page images at HathiTrust)
• Corrosion protection by calcite-type coatings. (1989) (page images at HathiTrust; US access only)
• Evaporation test variability study. Final report. (1993), by C. Anthony and L. Mackowiak (page images at HathiTrust)
• Field evaluation of the Radar Control Systems (RCS) radar anti-collision warning system. (1990), by A. C. Stein, R. A. Solomon, and D. A. Ziedman (page images at HathiTrust)
• Crashworthiness analysis of commuter aircraft seats. (1993), by D. H. Laananen (page images at HathiTrust)
• Door latch integrity study: evaluation of door latch failure modes. Final report. (1994), by J. Gavin Howe, M. Leigh, and Donald T. Willke (page images at HathiTrust)
• Detectable warnings: testing and performance evaluation at transit stations. Final report. (1994), by H. N. Ketola and David Chia (page images at HathiTrust)
• Recommendations for establishing the Texas Roadway Research Implementation Center. (1998), by J. J. Allan, A. Smit, and P. Warren (page images at HathiTrust)
• Testing and evaluation of the solar panel sign support system. (2001), by D. Lance Bullard, R. P. Blight, Wanda L. Menges, and S. K. Schoeneman (page images at HathiTrust)
• Flammability of automotive child restraint seats for use in aircraft. (2001), by Richard Johnson and Lindsey Wuethrich (page images at HathiTrust)
• Development of test scenarios for off-roadway crash countermeasures based on crash statistics. (2002), by Wassim Najm, J. A. Koopmann, Linda Ng Boyle, and D. Smith (page images at HathiTrust)
• Analysis of TxDOT thickness measurement procedures for thermoplastic pavement markings. (2002), by Timothy J. Gates and H. Gene Hawkins (page images at HathiTrust)
• Examination of blistering of fiberglass reinforced laminates. Final report. (1987), by D. Wirth, G. R. Hattery, D. Ensminger, J. Stets, and R. Dick (page images at HathiTrust; US access only)
• Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
• Abrasive testing cabinets - a state of the art study. (1985), by W. H. Radut (page images at HathiTrust; US access only)

More items available under narrower terms.