The Online Books Page

Titanium -- Metallurgy

See also what's at your library, or elsewhere.

• Titanium
• Metallurgy

• Titanium -- Metallurgy -- Bibliography
• Titanium -- Metallurgy -- Congresses
• Titanium -- Electrometallurgy
• Titanium sponge

• Production of titanium castings (U.S. Dept. of the Interior, Bureau of Mines, 1956), by R. A. Beall, H. L. Gilbert, J. O. Borg, and F. W. Wood (page images at HathiTrust)
• Preparation of titanium feedstock from Minnesota ilmenite by smelting and sulfation-leaching (U.S. Dept. of the Interior, Bureau of Mines, 1987), by R. H. Nafziger and G. W. Elger (page images at HathiTrust)
• Producing chlorination-grade feedstock from domestic ilmenite--laboratory and pilot plant studies (U.S. Dept. of the Interior, Bureau of Mines, 1986), by R. R. Jordan, H. E. Bell, J. E. Tress, J. B. Wright, and G. W. Elger (page images at HathiTrust)
• Inductoslag melting of titanium (U.S. Dept. of the Interior, Bureau of Mines, 1969), by P. G. Clites, R. A. Beall, and United States Bureau of Mines (page images at HathiTrust)
• Production of titanium dioxide pigment from perovskite concentrates, acid sulfation method (Bureau of Mines, U.S. Dept. of the Interior, 1992), by A. E. Petersen, J. H. Schwier, J. P. Allen, M. B. Shirts, and United States Bureau of Mines (page images at HathiTrust)
• Trap for removing ferric chloride from titanium tetrachloride (U.S. Dept. of the Interior, Bureau of Mines, 1958), by Edward C. Perkins, R. S. Lang, and Henry Dolezal (page images at HathiTrust)
• Titanium electrorefining : cathode studies and deep bath deposition (U.S. Dept. of the Interior, Bureau of Mines, 1959), by D. H. Baker and J. R. Nettle (page images at HathiTrust)
• Electrorefining titanium, using an internally heated cell (U.S. Dept. of the Interior, Bureau of Mines, 1959), by Oliver Q. Leone, D. H. Baker, and J. R. Nettle (page images at HathiTrust)
• Sodium reduction of titanic chloride (U.S. Dept. of the Interior, Bureau of Mines, 1958), by Vernon E. Homme, M. M. Wong, and D. H. Baker (page images at HathiTrust)
• Effect of impurities on mechanical properties of electrolytic titanium (U.S. Dept. of the Interior, Bureau of Mines, 1960), by Jack D. Ramsdell and David R. Mathews (page images at HathiTrust)
• Casting technology for titanium, zirconium, and hafnium (U.S. Dept. of the Interior, Bureau of Mines, 1960), by Standley L. Ausmus, R. A. Beall, and F. W. Wood (page images at HathiTrust)
• Reducing titanium tetrachloride with high-surface sodium (U.S. Dept. of the Interior, Bureau of Mines, 1960), by D. C. Fleck, D. H. Baker, and M. M. Wong (page images at HathiTrust)
• Effect of common impurities on hardness of electrolytically refined titanium metal (U.S. Dept. of the Interior, Bureau of Mines, 1959), by Frank P. Haver and D. H. Baker (page images at HathiTrust)
• Physical and mechanical properties of sodium-reduced and electrorefined titanium (U.S. Dept. of the Interior, Bureau of Mines, 1961), by C. N. Adams and Ernest D. Hull (page images at HathiTrust)
• Laboratory concentration of seven titanium-bearing ores of the Pacific northwest (U.S. Dept. of the Interior, Bureau of Mines, 1961), by Joseph W. Town and C. W. Sanders (page images at HathiTrust)
• Electrolytic methods of preparing cell feed for electrorefining titanium (U.S. Dept. of the Interior, Bureau of Mines, 1963), by D. H. Baker, D. C. Fleck, R. E. Campbell, and M. M. Wong (page images at HathiTrust)
• Metallurgical thermochemistry of titanium (U.S. Govt. Print. Off., 1959), by K. K. Kelley and Alla D. Mah (page images at HathiTrust)
• Metallurgical review of the titano-magnetite deposits at Iron Mountain, Wyoming; counter reply from one county in Wyoming to the alarms currently sounded on the immediate exhaustion of the national ore reserves for four basic metals of American economy. (Wyoming Dept. of commerce and industry, 1943), by C. S. Dietz and Wyoming. Dept. of Commerce and Industry (page images at HathiTrust)
• Titanium metallurgy : a bibliography of unclassified report literature (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technology Information Service, 1953., 1953), by Hugh Ellison Voress and U.S. Atomic Energy Commission (page images at HathiTrust)
• Titanium metallurgy : a bibliography of unclassified report literature (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technology Information Service, 1955., 1955), by Hugh Ellison Voress and U.S. Atomic Energy Commission (page images at HathiTrust)
• Titanium metal and its future (Harvard University Business School, 1952), by Richard M. Burston and Harvard University. Graduate School of Business Administration (page images at HathiTrust; US access only)
• Recent advances in titanium technology (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1958., 1958), by E. W. Cawthorne, W. Stuart Lyman, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1958., 1958), by George Gerard, Defense Metals Information Center (U.S.), National Research Council (U.S.). Materials Advisory Board. Panel on the Titanium Sheet-Rolling Program. Subpanel on Uniform Procedures for Structural Design Data Collection, United States. Office of Assistant Secretary of Defense (Research and Engineering), and United States Department of Defense (page images at HathiTrust)
• Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1958., 1958), by E. S. Bartlett, R. I. Jaffee, H. R. Ogden, D. N. Williams, Defense Metals Information Center (U.S.), National Research Council (U.S.). Materials Advisory Board. Panel on the Titanium Sheet-Rolling Program. Subpanel on Uniform Procedures for Structural Design Data Collection, United States. Office of Assistant Secretary of Defense (Research and Engineering), and United States Department of Defense (page images at HathiTrust)
• Department of Defense Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by H. R. Ogden, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Department of Defense Titanium sheet-rolling program (Chicago, Illinois: Armour Research Foundation of Illinois Institute of Technology, 1959., 1959), by L. E. Tanner, Armour Research Foundation (U.S.), Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Department of Defense Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by H. R. Ogden, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• The effects of alloying elements in titanium : Volume A., Constitution (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by D. J. Maykuth, Robert Isaac Jaffee, H. R. Ogden, Defense Metals Information Center (U.S.), National Research Council (U.S.). Materials Advisory Board. Panel on the Titanium Sheet-Rolling Program. Subpanel on Uniform Procedures for Structural Design Data Collection, United States. Office of Assistant Secretary of Defense (Research and Engineering), and United States Department of Defense (page images at HathiTrust)
• The effects of alloying elements in titanium : Volume B, Physical and chemical properties, deformation and transformation characteristics (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by D. J. Maykuth, Robert Isaac Jaffee, D. N. Williams, F. C. Holden, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Titanium-alloy forgings (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by H.-J. Henning, P. D. Frost, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Production of titanium shaped castings (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1956., 1956), by R. M. Lang, John George Kura, G. H. Schippereit, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Notch sensitivity of titanium and titanium alloys (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by F. C. Holden, Defense Metals Information Center (U.S.), and United States. Office of Assistant Secretary of Defense for Research and Development (page images at HathiTrust)
• Porosity in formed titanium (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by R. A. Wood, R. I. Jaffee, H. R. Ogden, D. N. Williams, Defense Metals Information Center (U.S.), and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Titanium production developments including metallurgy and alloying (Columbus, Ohio : Titanium Metalllurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by Robert Isaac Jaffee, Defense Metals Information Center (U.S.), and Norway and Copenhagen North Atlantic Treaty Organization. Advisory Group for Aeronautical Research and Development. Structures and Materials Panel. Meeting 1957 : Oslo (page images at HathiTrust)
• Descaling and cleaning of titanium and titanium alloys (Columbus, Ohio : Titanium Metalllurgical Laboratory, Battelle Memorial Institute, 1958., 1958), by D. W. Stough, F. W. Fink, Walter K. Boyd, E. B. Friedl, H. S. George, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Discussion of the design of riveted and bolted joints in titanium sheet (Columbus, Ohio : Titanium Metalllurgical Laboratory, Battelle Memorial Institute, 1956., 1956), by S. A. Gordon and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Forming of titanium and titanium alloys (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1956., 1956), by W. P. Achbach and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Report on Department of Defense Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1956., 1956), by W. J. Harris, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Report on Department of Defense Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1957., 1957), by C. R. Simcoe, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Report on Department of Defense Titanium sheet-rolling program. (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1957., 1957), by C. R. Simcoe, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Report on Department of Defense Titanium sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1958., 1958), by C. R. Simcoe, Defense Metals Information Center (U.S.), United States Department of Defense, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• Measurement of the thermal stability of titanium alloys (Columbus, Ohio : Titanium Metalllurgical Laboratory, Battelle Memorial Institute, 1956., 1956), by F. R. Schwartzberg, Robert Isaac Jaffee, D. N. Williams, W. D. Rahr, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Hot extrusion of titanium and titanium alloys (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1956., 1956), by Alvin M. Sabroff, P. D. Frost, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Evaluation of the quality and uniformity of the titanium mill products received by the aircraft industry during 1956 (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by F. J. Gillig, L. W. Smith, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Hydrogen in titanium and titanium alloys (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1958., 1958), by Dean N. Williams and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Titanium for the chemical engineer : lectures given at A.I. Ch. E. Materials Conference, Philadelphia, Pennsylvania, April 1, 1968 (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1968., 1968), by Defense Metals Information Center (U.S.) and Pa.) American Institute of Chemical Engineers. Materials Engineering and Sciences Conference 1968 : Philadelphia (page images at HathiTrust)

• Titanium metallurgy : a bibliography of unclassified report literature (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technology Information Service, 1953., 1953), by Hugh Ellison Voress and U.S. Atomic Energy Commission (page images at HathiTrust)
• Titanium metallurgy : a bibliography of unclassified report literature (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technology Information Service, 1955., 1955), by Hugh Ellison Voress and U.S. Atomic Energy Commission (page images at HathiTrust)

• Titanium for the chemical engineer : lectures given at A.I. Ch. E. Materials Conference, Philadelphia, Pennsylvania, April 1, 1968 (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1968., 1968), by Defense Metals Information Center (U.S.) and Pa.) American Institute of Chemical Engineers. Materials Engineering and Sciences Conference 1968 : Philadelphia (page images at HathiTrust)

• Electric-arc furnace processing of domestic titaniferous materials (U.S. Dept. of the Interior, Bureau of Mines, 1981), by R. H. Nafziger, W. L. Hunter, and R. R. Jordan (page images at HathiTrust)
• Use of composite diaphragms in the electrowinning of titanium (U.S. Dept. of Interior, Bureau of Mines, 1972), by O. Q. Leone, D. E. Couch, and United States Bureau of Mines (page images at HathiTrust)
• Electrolytic methods for producing titanium and titanium alloys (U.S. Dept. of the Interior, Bureau of Mines, 1966), by Ernst K. Kleespies, Thomas A. Henrie, and United States Bureau of Mines (page images at HathiTrust)
• Development of a 10,000-ampere cell for electrorefining titanium (U.S. Dept. of the Interior, Bureau of Mines, 1961), by Frank P. Haver and D. H. Baker (page images at HathiTrust)
• Transfer of selected metals in titanium electrorefining (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Ernst K. Kleespies and Thomas A. Henrie (page images at HathiTrust)
• Observations in the development of titanium-refining cells (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Oliver Q. Leone (page images at HathiTrust)

More items available under narrower terms.