The Online Books Page

Titanium alloys

See also what's at Wikipedia, your library, or elsewhere.

• Alloys

• Titanium alloys -- Machining
• Copper-titanium-zinc alloys
• Nickel-titanium alloys
• Nickel-titanium-carbon alloys
• Titanium steel
• Titanium-aluminum alloys
• Titanium-aluminum-vanadium alloys
• Titanium-iron alloys
• Titanium-vanadium alloys

• Fatigue and Stress Rupture Properties of Inconel 713C, V-57C and Titanium Alloys 7A1-3Mo-Ti and MST 821 (8A1-2Cb-1Ta-Ti) (Wright-Patterson Air Force Base, Ohio: Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by A. E. Cers and A. A. Blatherwick (page images at HathiTrust)
• Constitution of titanium alloy systems ([Washington, U.S. Dept. of Commerce, Office of Technical Services], 1953), by Max Hansen (page images at HathiTrust)
• Edgewise compressive and fatigue properties of brazed titanium sandwich constructions / (Madison, Wis. : Forest Products Laboratory, Forest Service, U.S. Dept. of Agriculture, 1973), by G. H. Stevens (page images at HathiTrust)
• Mechanical properties of diffusion-bonded titanium sandwich constructions / (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by Edward W. Kuenzi and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Fatigue properties of titanium and nickel-base sandwich constructions / (Madison, Wis. : Forest Products Laboratory, Forest Service, U.S. Dept. of Agriculture, 1970), by Paul M. Jenkinson (page images at HathiTrust)
• Grain growth of titanium and titanium alloys at normal hot-working temperatures. (Watertown, Mass. : Watertown Arsenal : [Distributed by U.S. Dept. of Commerce, Office of Technical Services ; Washington], 1955), by Frank R. Larson (page images at HathiTrust; US access only)
• Relative susceptibility of titanium alloys to hot-salt stress-corrosion / (Washington, D.C. : National Aeronautics and Space Administration, 1971), by Hugh R. Gray, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Design and evaluation of active cooling systems for Mach 6 cruise vehicle wings / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1971), by W. A. McConarty, F. M. Anthony, Langley Research Center, and Bell Aerospace Company (page images at HathiTrust)
• Surface effects on hydrogen permeation through Ti-14Al-21Nb alloy / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1991), by Sankara Narayan Sankaran, Ronald K. Clark, R. A. Outlaw, and Langley Research Center (page images at HathiTrust)
• Hot-salt stress corrosion cracking of titanium alloys / (Washington, D.C. : National Aeronautics and Space Administration, 1971), by R. S. Ondrejcin, United States National Aeronautics and Space Administration, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stress corrosion cracking of titanium alloys at ambient temperature in aqueous solutions / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1969), by T. L. Mackay, McDonnell Douglas Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Oxidation characteristics of Ti-14Al-21Nb alloy / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Sankara Narayan Sankaran and Langley Research Center (page images at HathiTrust)
• An approach to metal fatigue / (Washington, D.C. : NASA, 1965), by F. B. Stulen, W. C. Schulte, J. H. Redfern, Curtiss-Wright Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1970), by J. D. Boyd, United States National Aeronautics and Space Administration, and Battelle Memorial Institute (page images at HathiTrust)
• Fatigue of four stainless steels, four titanium alloys, and two aluminum alloys before and after exposure to elevated temperatures for up to three years / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1971), by Walter Illg, L. A. Imig, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Tensile properties to 650 ̊C and deformation structures in a precipitation-strengthened titanium-aluminum alloy (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Madan G. Mendiratta, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Determination of hydrogen in milligram quantities of titanium and its alloys / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Dumas A. Otterson, Robert J. Smith, and Lewis Research Center (page images at HathiTrust)
• Salt-stress-corrosion cracking of residually stressed Ti-8Al-1Mo-1V brake-formed sheet at 550° F (561° K) / (Washington, D.C. : National Aeronautics and Space Administration ; Washington, D.C. : For sale by the Office of Technical Services, Department of Commerce [distributor], 1965), by Richard A. Pride, John M. Woodard, and Langley Research Center (page images at HathiTrust)
• Research and development for the welding of titanium and titanium alloys : final technical report on contract number DA-11-022-ORD-137 to Office of the Chief of Ordnance, Dept. of the Army / (Milwaukee : A.O. Smith Corp., 1954), by J. J. Chyle, Ivan Kutuchief, Wis.) A.O. Smith Corporation (Milwaukee, and United States. Army. Ordnance Corps (page images at HathiTrust)
• Determination of the effect of high excess H₂SO₄ concentrations on the radiation-induced corrosion of zirconium and titanium alloys in 0.17 m UO₂SO₄ / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, [1962]), by G. H. Jenks, E. G. Bohlmann, J. E. Baker, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Power hacksaw operations on titanium and its alloys : report no. 6 / (Ann Arbor : Engineering Research Institute, University of Michigan, [1953]), by Frank Sowa, Lester Vern Colwell, and University of Michigan. Engineering Research Institute (page images at HathiTrust; US access only)
• Titanium and titanium alloys. (Washington, D.C. : U.S. Dept. of Defense, 1974-), by United States. Dept. of Defense (page images at HathiTrust)
• Elevated-temperature fatigue properties of two titanium alloys / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by William K. Rey and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Thermal conductivity, electrical resistivity, and thermoelectric power of titanium alloy RC-130-B / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, 1952), by W .W. Tyler, A. C. Wilson, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Investigation of the Ti-Al-Cb system as a source of alloys for use at 1200⁰-1800⁰F (Wright-Patterson Air Force Base, Ohio, Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by Joseph B. McAndrew and Charles R. Simcoe (page images at HathiTrust)
• Fatigue-crack propagation in several titanium and stainless-steel alloys and one superalloy / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1964), by C. M. Hudson, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Machining data for titanium alloys. ([Cincinnati, Air Force Machinability Data Center, 1965]), by John Maranchik and Air Force Machinability Data Center (page images at HathiTrust)
• Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Richard A. Pride and Langley Research Center (page images at HathiTrust)
• Physical metallurgy of titanium : works of the Fifth Conference on Metallurgy, Physical Metallurgy and Application of Titanium and its Alloys, March, 1963 / ([Washington, D.C.] : National Aeronautics and Space Administration ; Springfield, Va. : for sale by the Clearinghouse for Federal Scientific and Technical Information, 1965), by metallovedenii︠u︡ i primenenii︠u︡ titana i ego splavov Soveshchanie po metallurgii, I. I. Kornilov, and Institut metallurgii im. A.A. Baĭkova (page images at HathiTrust; US access only)
• Effect of outdoor exposure at elevated temperature on the fatigue life of Ti-8Al-1Mo-1V titanium alloy and AM 350 stainless steel sheet / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va. 22151], 1969), by Edward P. Phillips, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Nondestructive testing techniques for titanium billets. ([Wright-Patterson Air Force Base, Ohio, Air Force Materials Laboratory, Air Force Systems Command, 1969]), by Frank J. Sattler (page images at HathiTrust)
• Symposium on titanium : 8 and 9 November 1950. (Washington, D.C. : [U.S. G.P.O., 1950]), by United States. Department of Defense. Research and Development Board (page images at HathiTrust)
• Tentative specification for titanium and titanium-alloy bare welding rods and electrodes / ([New York, N.Y. : American Welding Society ; Philadelphia, Pa. : American Society for Testing Materials], 1961), by American Welding Society and American Society for Testing and Materials (page images at HathiTrust; US access only)
• Material characterization of superplastically formed titanium (Ti-6Al-2Sn-4Zr-2Mo) sheet / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1987), by William A. Ossa, Dick M. Royster, and Langley Research Center (page images at HathiTrust)
• Effect of LID® processing on the microstructure and mechanical properties of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo titanium foil-gauge materials / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1987), by Linda B. Blackburn and Langley Research Center (page images at HathiTrust)
• Shot peening for Ti-6Al-4V alloy compressor blades / ([Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1987), by Gerald A. Carek (page images at HathiTrust)
• Emittance, catalysis, and dynamic oxidation of Ti-14Al-21Nb / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by K. E. Wiedemann, Sankara Narayan Sankaran, R. K. Clark, and Langley Research Center (page images at HathiTrust)
• Fabrication and evaluation of cold-formed/weld-brazed beta-titanium skin-stiffened compression panels / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by Dick M. Royster and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effect of exposure cycle on hot-salt stress-corrosion of a titanium alloy / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Hugh R. Gray, James R. Johnston, and Lewis Research Center (page images at HathiTrust)
• Tensile and creep properties of titanium-vanadium, titanium-molybdenum, and titanium-niobium / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Hugh R. Gray and Lewis Research Center (page images at HathiTrust)
• Friction, wear, and adhesion characteristics of titanium-aluminum alloys in vacuum / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Donald H. Buckley, Robert L. Johnson, and Lewis Research Center (page images at HathiTrust)
• Smooth and sharpe-notch property variations for several heats of Ti-6A1-4V sheet at room and cryogenic temperatures Morgan P. Hanson and Hadley T. Richards. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by Morgan P. Hanson, Hadley T. Richards, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue of liquid rocket engine metals at cryogenic temperatures to -452 ̊F (4 ̊K) / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Alfred J. Nachtigall, John C. Freche, Stanley J. Klima, and Lewis Research Center (page images at HathiTrust)
• Real-time testing of titanium sheet and extrusion coupon specimens subjected to Mach 2.7 supersonic cruise aircraft wing stresses and temperatures / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office, 1977), by Tjerand Lunde, Lockheed-California Company, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Low-temperature forming of beta titanium alloys / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by R. S. Kaneko, C. A. Woods, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Texture strengthening and fracture toughness of titanium alloy sheet at room and cryogenic temperatures / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by Timothy L. Sullivan, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue of notched Ti-8Al-1Mo-1V titanium alloy at room temperature and 550⁰ F (560⁰ K) with flight-by-flight loading representative of a supersonic transport / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1969), by L. A. Imig, Walter Illg, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of initial loads and of moderately elevated temperature on the room-temperature fatigue life of Ti-8Al-1Mo-1V titanium-alloy sheet / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by L.A. Imig, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Friction and wear of titanium alloys and copper alloys sliding against titanium - 6-percent-aluminum - 4-percent-vanadium alloy in air at 430C̊ / (Washington : U.S. National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by Donald W. Wisander, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Long time creep behavior of tantalum - 10 tungsten in high vacuum / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by Robert H. Titran, William D. Klopp, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Short-time stress rupture of prestressed titanium alloys under rapid heating conditions / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by Carl R. Johnson, John D. Grimsley, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of nuclear radiation at cryogenic temperatures on the tensile properties of titanium and titanium-base alloys / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by Charles L. Younger, Fred A. Haley, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Influence of salt and elevated-temperature exposure on the maximum compressive strength of titanium-alloy skin-stringer panels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]), by James E. Gardner, Dick M. Royster, and Langley Research Center (page images at HathiTrust)
• Hot-salt stress-corrosion of a titanium alloy under a simulated turbine-engine compressor environment / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by Hugh R. Gray, James R. Johnston, and Lewis Research Center (page images at HathiTrust)
• Influence of various fabrication methods on the compressive strength of titanium skin-stringer panels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by Richard A. Pride, James E. Gardner, Dick M. Royster, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• A survey of salt deposits in compressors of flight gas turbine engines [electronic resource] / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Richard L. Ashbrook, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Fretting wear in titanium, Monel-400, and cobalt : 25-percent molybdenum using scanning electron microscopy / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972), by Robert C. Bill, U.S. Army Air Mobility R & D Laboratory, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Strain-rate sensitivity of three titanium-alloy sheet materials after prolonged exposure at 550 ̊F (561 ̊K) [electronic resource] / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Robert M. Baucom, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Hot-salt stress-corrosion of titanium alloys : generation of hydrogen and its embrittling effect / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Hugh R. Gray, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Behavior of Ti-5Al-2.5Sn ELI titanium alloy sheet parent and weld metal in the presence of cracks at 20 K (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1971]), by Timothy L. Sullivan, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Compressive behavior of titanium alloy skin-stiffener specimens selectively reinforced with boron-aluminum composite / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1971]), by Harvey W. Herring, Rosa C. Webster, Robert L. Carri, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Titanium alloys for modern technology / ([Washington] : National Aeronautics and Space Administration, for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va., [1970]), ed. by N. P. Sazhin (page images at HathiTrust; US access only)
• The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N₂O₄, and aqueous and hot-salt environments. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, U.S. G.P.O.], 1971), by J. D. Boyd and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Role of hydrogen chloride in hot-salt stress corrosion cracking of titanium-aluminum alloys / (Washington, D.C. : National Aeronautics and Space Administration, 1968), by R. S. Ondrejcin and M. R. Louthan (page images at HathiTrust; US access only)
• Cyclic creep-rupture behavior of three high-temperature alloys / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by Gary R. Halford, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Titanium and titanium alloy fasteners ([Hawthorne, Calif.], 1958), by Northrop Corporation, J. L. Chinn, and United States. Air Force. Air Matériel Command (page images at HathiTrust)
• Report on the engineering properties of commercial titanium alloys /, by M. W. Mote, P. D. Frost, R. B. Hooper, sponsor Battelle Memorial Institute, and issuing body Titanium Metallurgical Laboratory (U.S.) (page images at HathiTrust)
• Joining of titanium carbide-nickel cermets /, by Malcolm Basche, John Wulff, Romeo G. Bourdeau, sponsor United States. Air Force. Air Research and Development Command, and issuing body Wright Air Development Center (page images at HathiTrust)
• Metallurgical and mechanical characteristics of high-purity Titanium-base alloys /, by Richard W. Douglass, Robert I. Jaffee, Horace R. Ogden, Frank C. Holden, United States. Air Force. Air Research and Development Command. sponsor, Wright Air Development Center issuing body, and Battelle Memorial Institute (page images at HathiTrust)
• Metallurgical and mechanical characteristics of high-purity Titanium-base alloys /, by Albert G. Imgram, Robert I. Jaffee, Horace R. Ogden, Richard A. Wood, Dean N. Williams, United States. Air Force. Air Research and Development Command. sponsor, Wright Air Development Center issuing body, and Battelle Memorial Institute (page images at HathiTrust)
• Effect of prior creep on mechanical properties of aircraft structural metals : (2024-T86 Aluminum and 17-7 PH stainless) /, by Jeremy V. Gluck, James W. Freeman, Howard R. Voorhees, United States. Air Force. Air Research and Development Command. sponsor, Wright Air Development Center issuing body, and University of Michigan. Engineering Research Institute (page images at HathiTrust)
• Effect of prior creep on mechanical properties of aircraft structural metals :, by Jeremy V. Gluck, James W. Freeman, Howard R. Voorhees, United States. Air Force. Air Research and Development Command. sponsor, Wright Air Development Center issuing body, and University of Michigan. Engineering Research Institute (page images at HathiTrust)
• Effect of prior creep on mechanical properties of aircraft structural metals :, by Jeremy V. Gluck, James W. Freeman, Howard R. Voorhees, United States. Air Force. Air Research and Development Command. sponsor, Wright Air Development Center issuing body, and University of Michigan. Engineering Research Institute (page images at HathiTrust)
• Investigation of galvanically induced hydriding of titanium in saline solutions / (Washington, D.C. : U.S. Dept. of the Interior; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970 [i.e. 1971]), by L. A. Charlot, Battelle Northwest Battelle Memorial Institute, and United States. Office of Saline Water (page images at HathiTrust)
• Electrorefining of titanium-nitrogen alloys / ([Washington, D.C.] : U.S. Dept of the Interior, Bureau of Mines, 1966), by Oliver Q. Leone, D. E. Couch, and United States Bureau of Mines (page images at HathiTrust)
• Corrosion properties of the TZM and molybdenum-30 tungsten alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1968]), by Walter L. Acherman, David Schlain, J. P. Carter, and United States Bureau of Mines (page images at HathiTrust)
• Electrorefining of titanium from binary alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1958), by J. R. Nettle, T. E. Hill, and D. H. Baker (page images at HathiTrust)
• Titanium-gadolinium phase diagram / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1961), by H. Kato, C. E. Armantrout, S. C. Rhoads, and J. G. Croeni (page images at HathiTrust)
• Determination of oxygen in titanium / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1961), by R. A. Plott, A. J. Mackie, B. J. Boyle, and Thomas A. Sullivan (page images at HathiTrust)
• Reaction rates of the titanium-oxygen alloy system and titanium chlorides in molten sodium chloride / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1967), by Ernst K. Kleespies, Thomas A. Henrie, and J. Jackson (page images at HathiTrust)
• Electrorefining of titanium-oxygen alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by Oliver Q. Leone and Frank S. Wartman (page images at HathiTrust)
• Electrorefining of selected titanium ternary alloys / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by J. R. Nettle, D. H. Baker, and T. E. Hill (page images at HathiTrust)
• Thorium-titanium alloy system / (Oak Ridge, Tenn., U.S. Atomic Energy Commission. Technical Information Service, 1953), by H. A. Wilhelm, Harry E. Lunt, O. Norman Carlson, Iowa State College, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An investigation of the effect of certain minor elements on the elevated temperature ductility of incoloy 800 / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1970), by William J. Werner, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Machining and grinding of titanium and its alloys /, by C. T. Olofson, J. A. Burklis, F. W. Boulger, George C. Marshall Space Flight Center, U.S. Army Aviation and Missile Command, Battelle Memorial Institute, U.S. Atomic Energy Commission, and Redstone Scientific Information Center (page images at HathiTrust)
• A review of recent developments in titanium and titanium-alloy technology /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Design information on titanium alloys for aircraft and missiles /, by W. P. Achbach, R. J. Favor, Defense Metals Information Center (U.S.) issuing body, and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• The status and properties of titanium alloys for thick plate /, by G. E. Faulkner, D. C Martin, W. J. Lewis, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Machining of titanium alloys /, by C. T Olofson, J. A. Gurklis, F. W. Boulger, A. F. Gerds, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Beta forging of titanium alloys /, by H.-J Henning and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Plane-strain fracture-toughness data for selected metals and alloys /, by James E. Campbell and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on principles and application of heat treatment for titanium alloys /, by A. J. Griest, P. D. Frost, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on descaling and cleaning of titanium and titanium alloys /, by D. W. Stough, F. W. Fink, Walter K. Boyd, E. B. Friedl, H. S. George, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on forming of titanium and titanium alloys /, by W. P. Achbach and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on the hot extrusion of titanium and titanium alloys /, by Alvin M Sabroff, P. D. Frost, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on hydrogen in titanium and titanium alloys /, by Dean N. Williams and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Electrical measurements on the growing scale on zirconium-titanium alloys / (Argonne, Ill. : Argonne National Laboratory, 1961), by R. D. Misch, G. W. Iseler, U.S. Atomic Energy Comission. ANL, and Argonne National Laboratory. Metallurgy Division. ANL (page images at HathiTrust; US access only)
• Electrorefining titanium metal / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1957), by J. R. Nettle, F. S. Wartman, and D. H. Baker (page images at HathiTrust)
• Thermodynamic properties of titanium-oxygen solutions and compounds / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines ;, 1957), by C. J. H. O'Brien, E. G. King, Norma L. Gellert, K. K. Kelley, and Alla D. Mah (page images at HathiTrust)
• Effect of fluoride inclusions on induction-slag-melted Ti-6A1-4V alloy / ([Pittsburgh, Pa.] : U.S. Dept. of the Interior, Bureau of Mines, [1988]), by J. I. Paige (page images at HathiTrust)
• Vacuum induction melting of Ti-6AI-4V in a cold crucible / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, [1988]), by J. I. Paige (page images at HathiTrust)
• Effects of rolling temperature and titanium content on creep and other properties of zinc-titanium and zinc-copper-titanium alloys / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1971]), by L. A. Neumeier, J. S. Risbeck, and United States Bureau of Mines (page images at HathiTrust)
• Room temperature tensile properties of titanium and seven titanium alloys prepared by skull casting / ([Washington, D.C.] : Bureau of Mines, [1974]), by E. D. Calvert and R. R. Lowery (page images at HathiTrust)
• Electrolytic methods for producing titanium and titanium alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Ernst K. Kleespies, Thomas A. Henrie, and United States Bureau of Mines (page images at HathiTrust)
• Metallic titanium and its alloys / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1946), by Reginald S. Dean, B. Silkes, and United States Bureau of Mines (page images at HathiTrust)
• Effect of varied extrusion temperature on the properties of a zinc-copper-titanium alloy / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1969]), by L. A. Neumeier, John S. Risbeck, and United States Bureau of Mines (page images at HathiTrust)
• Heat and free-energy data for tricalcium dititanate, sphene, lithium metatitanate, and zinc-titanium spinel / ([Washington, D.C.] : U.S. Dept. of Energy, Bureau of Mines, 1956), by S. S. Todd, K. K. Kelley, and United States Bureau of Mines (page images at HathiTrust)
• Influence of rolling temperature and copper content on creep and other properties of zinc-copper and zinc-titanium-copper alloys / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1970]), by L. A. Neumeier, John S. Risbeck, and United States Bureau of Mines (page images at HathiTrust)
• Stress corrosion cracking of vanadium, molybdenum, and a titanium-vanadium alloy / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by J. P. Carter, David Schlain, Charles B. Kenahan, and United States Bureau of Mines (page images at HathiTrust)
• Chemical and galvanic corrosion properties of titanium alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1958), by Charles B. Kenahan and David Schlain (page images at HathiTrust)
• Properties of titanium-vanadium-zirconium alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1960), by Jack D. Ramsdell and E. D. Hull (page images at HathiTrust)
• Properties of titanium-vanadium-cobalt alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1960), by Jack D. Ramsdell and E. D. Hull (page images at HathiTrust)
• Reaction rate of titanium-iron alloys and titanium trichloride in molten sodium chloride / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1967), by Ernst K. Kleespsies and Thomas A. Henrie (page images at HathiTrust)
• Titanium-iridium phase diagram / (Washington, D.C. : U.S. Bureau of Mines, 1962), by Jack G. Croeni (page images at HathiTrust)
• Composition and mechanical properties of selected cold-mold and skull-cast titanium alloys / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by E. D. Calvert (page images at HathiTrust)
• Creep and other properties of zinc-copper-titanium alloys annealed after rolling / ([Washington, DC] : Bureau of Mines, U.S. Dep. of the Interior, [1972]), by L. A. Neumeier, John S. Risbeck, and Rolla Research Center (United States. Bureau of Mines) (page images at HathiTrust)
• Cleaning titanium alloy chips / ([Washington, D.C.] : U.S. Dept of Interior, Bureau of Mines, [1973]), by O. Q. Leone, D. E. Couch, United States Bureau of Mines, and Boulder City Metallurgy Research Laboratory (U.S.) (page images at HathiTrust)
• Allotropic transformations in titanium, zirconium, and uranium alloys / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1955), by A. E. Dwight, Argonne National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The constitution of delta-phase alloys of the system uranium-molybdenum-titanium / (Columbus, OH : Battelle Memorial Institute, [1956]), by J.Robert Doig, Arthur A. Bauer, Frank A. Rough, Henry A. Saller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Tensile properties of yttrium-titanium and yttrium-zirconium alloys / ([Ames, Iowa] : Ames Laboratory, [1960]), by D. W. Bare, O. N. Carlson, E. D. Gibson, U.S. Atomic Energy Commission, and Ames Laboratory (page images at HathiTrust)
• The structure of TiBe₁₂ : (contribution no. 127) / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, [1951]), by R. Raeuchle, R. E. Rundle, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Memorandum on titanium-gadolinium and titanium-boron alloys to Hanford Works, General Electric Co. from Battelle Memorial Institute / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1950), by H. R. Ogden, Robert Isaac Jaffee, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Thermal conductivity, electrical resistivity, and thermoelectric power of titanium alloy, RC-130-B / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service ; [Washington, D.C.] : [For sale by the Superintendent of Documents, U.S. G.P.O.] ;, 1952), by W. W. Tyler, A. C. Wilson, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Optimization of mechanical/corrosion properties of TI-CODE-12 plate and sheet : part II: thermomechanical processing effects (stage II final report) / (Albuquerque, New Mexico : Sandia National Laboratories ;, 1988), by R. W. Schutz, J. A. Hall, Sandia National Laboratories, and Sandia Laboratories (page images at HathiTrust)
• The constitution of delta-phase alloys of the system uranium-zirconium-titanium /, by Henry A. Saller, J.Robert Doig, Arthur A. Bauer, Frank A. Rough, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• The titanium-hydrogen system /, by R. M. Haag, F. J. Shipko, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effects of high strain rates and rapid heating on the tensile properties of titanium alloys /, by F. R. Schwartzberg and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The effect of rate of heating to aging temperature on the tensile properties of Ti-2.5Al-16V alloy sheet /, by G. S. Root, H. R. Ogden, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A statistical summary of mechanical-property data for titanium alloys /, by W. Stuart Lyman and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The emittance of titanium and titanium alloys /, by W. D Wood, C. F. Lucks, H. W. Deem, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Statistical analysis of tensile properties of heat-treated Ti-4A1-3Mo-1V sheet /, by H. R Ogden, A. E. Mace, G. H. Beatty, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Statistical analysis of tensile properties of heat-treated Ti-4A1-3Mo-1V and Ti-2.5A1-16V sheet / (Columbus Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961), by G. H Beatty, H. R. Ogden, Defense Metals Information Center (U.S.) issuing body, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Report on tensile properties of titanium alloys at low temperatures / (Columbus, Ohio : Defense Metals Information Center, 1959), by F. C. Holden, H. R. Ogden, F. R. Schwartzberg, Defense Metals Information Center (U.S.) issuing body, and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
• The all-beta titanium alloy (Ti-13V-11Cr-3Al) /, by R. A Wood, H. R. Ogden, Defense Metals Information Center (U.S.) issuing body, and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• The welding of titanium and titanium alloys /, by G. E. Faulkner and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A review of recent developments in titanium and titanium alloy technology /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Fabricating and machining practices for the all-beta titanium alloy (Ti-13V-11Cr-3Al) /, by C. T Olofson and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A review of recent developments in titanium and titanium alloy technology /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A review of recent developments in titanium and titanium alloy technology /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Forming of titanium and titanium alloys /, by D. E. Strohecker and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The roll-diffusion bonding of structural shapes and panels /, by J. A. Houck, E. S. Bartlett, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Residual stresses, stress relief, and annealing of titanium and titanium alloys /, by D. J Maykuth and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The Ti-8A1-1Mo-1V alloy /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on a study of freezing segregation in titanium alloy ingots /, by J. W. Holladay and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on notch sensitivity of titanium and titanium alloys /, by F. C. Holden, Defense Metals Information Center (U.S.) issuing body, and United States. Office of Assistant Secretary of Defense for Research and Development (page images at HathiTrust)
• Report on titanium production developments including metallurgy and alloying /, by Robert Isaac Jaffee, Defense Metals Information Center (U.S.) issuing body, and Norway and Copenhagen North Atlantic Treaty Organization. Advisory Group for Aeronautical Research and Development. Structures and Materials Panel. Meeting (5th : 1957 : Oslo (page images at HathiTrust)
• Report on the selection of materials for high-temperature applications in airframes /, by S. A. Gordon and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Supplement to TML Report No. 13 on the selection of materials for high-temperature applications in airframes /, by S. A. Gordon, L. R. Jackson, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on a discussion of the design of riveted and bolted joints in titanium sheet /, by S. A. Gordon and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on the measurement of the thermal stability of titanium alloys /, by F. R. Schwartzberg, Robert Isaac Jaffee, D. N. Williams, W. D. Rahr, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on survey of the extent of testing facilities for the determination of mechanical and physical properties of metals at various temperatures /, by W. P. Achbach and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on the stress corrosion and pyrophoric behavior of titanium and titanium alloys /, by D. W. Stough and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The oxidation and contamination of titanium and its alloys /, by J. M Ferguson and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A tabulation of designations, properties, and treatments of titanium and titanium alloys /, by R. A Wood and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Properties of new high-temperature titanium alloys /, by A. W. Hodge, D. J. Maykuth, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Quarterly technical progress report : fuels, materials, and coolant chemistry programs, January-March 1970 /, by Rockwell International. Atomics International Division and U.S. Atomic Energy Commission (page images at HathiTrust)
• Extended study of flaw growth at fastener holes. (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978), by T. M. Hsu, W. M. McGee, sponsor Air Force Flight Dynamics Laboratory (U.S.), issuing body United States. Air Force. Systems Command, and sponsor Lockheed-Georgia Company (page images at HathiTrust)
• Properties of active eutectoid Titanium alloys /, by R. F. Bunshah, H. Margolin, sponsor United States. Air Force. Air Research and Development Command, Wright Air Development Center issuing body, and New York University. Research Division (page images at HathiTrust)
• Extended study of flaw growth at fastener holes., by T. M. Hsu, J. A. Aberson, W. M. McGee, sponsor Air Force Flight Dynamics Laboratory (U.S.), issuing body United States. Air Force. Systems Command, and sponsor Lockheed-Georgia Company (page images at HathiTrust)
• Diffusion in titanium and titanium alloys /, by Rodney P. Elliott, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, and sponsor Armour Research Foundation (U.S.) (page images at HathiTrust)
• The effect of grain size on the mechanical properties of titanium and its alloys /, by Frank Charles Holden, Robert I. Jaffee, Horace R. Ogden, issuing body Wright Air Development Center, sponsor United States. Air Force. Air Research and Development Command, and sponsor Battelle Memorial Institute (page images at HathiTrust)
• Ferro carbon titanium in steel making / (Niagara Falls, N. Y. : Titanium Alloy Manufacturing, 1916), by Titanium Alloy Mfg. Co (page images at HathiTrust)
• Adhesive bonding of titanium and its alloys /, by R. E. Keith, D. C. Martin, R. E. Monroe, George C. Marshall Space Flight Center, U.S. Army Aviation and Missile Command, Battelle Memorial Institute, U.S. Atomic Energy Commission, and Redstone Scientific Information Center (page images at HathiTrust)
• Stress-corrosion cracking in high strength steels and in titanium and aluminum alloys / (Washington, Naval Research Laboratory; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1972), by B. F. Brown and United States. Office of Naval Research (page images at HathiTrust)
• A Study of the effect of superimposed stress concentrations and fracture of inhomogeneous brittle solids /, by Volker Weiss, G. Nash, A. Takimoto, issuing agency Air Force Materials Laboratory (U.S.), and sponaor Syracuse University (page images at HathiTrust)
• A study of the influence of geometry on the strength of fatigue cracked panels /, by E. K. Walker, sponsor Northrop Corporation, and sponsor Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Advanced nondestructive testing techniques for titanium billets and ingots /, by I. M. Matay, F. J. Sattler, issuing agency Air Force Materials Laboratory (U.S.), and sponsor TRW Inc. (page images at HathiTrust)
• Evaluation of the reliability and sensitivity of NDT methods for titanium alloys /, by Robert J. Lord, issuing agency Air Force Materials Laboratory (U.S.), sponsor McDonnell Aircraft Company, and sponsor McDonnell Douglas Corporation (page images at HathiTrust)
• Crack arrest in titanium /, by S. J. Burns, issuing body Air Force Materials Laboratory (U.S.), and sponsor University of Rochester. College of Engineering and Applied Science (page images at HathiTrust)
• A study of the factors affecting the decompoisition of the intermediate phase gamma Ti3A1 /, by P. A. Farrar, H. Margolin, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, issuing agency Air Force Materials Laboratory (U.S.), and sponsor New York University (page images at HathiTrust)
• Evaluation of the reliability and sensitivity of NDT methods for titanium alloys., by Robert J. Lord, issuing agency Air Force Materials Laboratory (U.S.), sponsor McDonnell Aircraft Company, and sponsor McDonnell Douglas Corporation (page images at HathiTrust)
• Machining of new materials /, by Norman Zlatin, John B. Kohls, Michael Field, John T. Cammett, John D. Christopher, issuing agency Air Force Materials Laboratory (U.S.), and sponsor Metcut Research Associates (page images at HathiTrust)
• Fracture control procedures for aircraft structural integrity /, by Howard A. Wood and issuing agency Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Tensile properties and rheotropic behavior of titanium alloys and molybdenum /, by E. J. Ripling, issuing body Wright Air Development Center, sponsor Case Institute of Technology, and sponsor United States. Air Force. Air Research and Development Command (page images at HathiTrust)
• Effect of prior creep on the mechanical properties of a high-strength heat-treatable Titanium alloy, Ti-16V-2.5Al /, by Jeremy V. Gluck, J. W. Freeman, issuing body Wright Air Development Center, sponsor United States. Air Force. Air Research and Development Command, and sponsor University of Michigan. Research Institute (page images at HathiTrust)
• Tensile and creep properties of A110-AT titanium sheet material at elevated temperatures /, by James O. Hachet, Edward L. Horne, and sponsor United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes (page images at HathiTrust)
• Study of local order of solid-solution strengthening in columbium alloys /, by Peter Strom Rudman, issuing body United States. Air Force. Systems Command. Aeronautical Systems Division, sponsor Air Force Materials Laboratory (U.S.), and sponsor Battelle Memorial Institute (page images at HathiTrust)
• The effect of addition elements on the rate of beta grain growth in alpha-beta and beta titanium alloys /, by F. A. Crossley, sponsor United States. |b Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and sponsor Armour Research Foundation (U.S.) (page images at HathiTrust)
• Investigation of the creep buckling behavior of columns :, by Ralph Papirno, George Gerard, issuing body Wright Air Development Center, sponsor United States. Air Force. Air Research and Development Command, and sponsor New York University (page images at HathiTrust)
• Investigation of the creep buckling behavior of columns:, by Ralph Pairno, issuing body Wright Air Development Center, sponsor United States. Air Force. Air Research and Development Command, and sponsor New York University (page images at HathiTrust)
• A study of the factors affecting the decompoisition of the intermediate phase gamma Ti3A1 /, by P. A. Farrar, H. Margolin, issuing agency United States. Air Force. Systems Command, issuing agency Air Force Materials Laboratory (U.S.), and sponsor New York University (page images at HathiTrust)
• Mechanical properties of two titanium forging alloys, Ti 155A and C135AMo. /, by R. G. Henning, United States. Wright Air Development Division. Materials Central. sponsor, and United States. Air Force. Systems Command. Aeronautical Systems Division. issuing body (page images at HathiTrust)
• The relative susceptibility of four commercial titanium alloys to salt stress corrosion at 550⁰ F / (Washington, D.C. : National Aeronautics and Space Administration, 1963), by David N. Braski, George J. Heimerl, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Machining data for numerical control reaming /, by Michael Field, John F. Kahles, Clarence L. Mehl, sponsor Air Force Machinability Data Center, sponsor Air Force Materials Laboratory (U.S.), and issuing body United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• Machining data for numerical control tapping /, by Michael Field, John F. Kahles, Clarence L. Mehl, sponsor Air Force Machinability Data Center, sponsor Air Force Materials Laboratory (U.S.), and issuing body United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• Machining data for numerical control face milling /, by Michael Field, John F. Kahles, Clarence L. Mehl, sponsor Air Force Machinability Data Center, sponsor Air Force Materials Laboratory (U.S.), and issuing body United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• Machining data for numerical control end mill slotting /, by Michael Field, John F. Kahles, Clarence L. Mehl, sponsor Air Force Machinability Data Center, sponsor Air Force Materials Laboratory (U.S.), and issuing body United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• Machining data for numerical control drilling /, by Michael Field, John F. Kahles, Clarence L. Mehl, sponsor Air Force Machinability Data Center, sponsor Air Force Materials Laboratory (U.S.), and issuing body United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• The effects of slip character and crack closure on the growth of small fatigue cracks in titanium-aluminium alloys /, by James M. Larsen, sponsor Wright Research Development Center, sponsor Air Force Flight Dynamics Laboratory (U.S.), and issuing body United States. Air Force. Systems Command (page images at HathiTrust)
• Residual static strength of several titanium and stainless-steel alloys and one superalloy at -109 ̊F, and 550 ̊F / (Washington, D.C. : National Aeronautics and Space Administration, 1963), by I. E. Figge, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)

More items available under narrower terms.