The Online Books Page

Ultrahigh molecular weight polyethylene

See also what's at your library, or elsewhere.

• Polyethylene

• Ultrahigh molecular weight polyethylene -- Effect of radiation on
• Ultrahigh molecular weight polyethylene -- Synthesis

• HMPE (High modulus polyethylene)
• HPPE (High performance polyethylene)
• High modulus polyethylene
• High performance polyethylene
• UHMPE (Ultrahigh molecular mass polyethylene)
• UHMWPE (Ultrahigh molecular weight polyethylene)
• Ultra-high molecular weight polyethylene
• Ultrahigh molecular mass polyethylene

• Effect of sterilization irradiation on friction and wear of ultrahigh-molecular-weight polyethylene (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by William R. Jones, Aldo M. Crugnola, William F. Hady, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)

• Synthesis of ultrahigh molecular-weight poly(ethylene terephthalate) (National Aeronautics and Space Administration ;, 1968), by Licheng Xu and Lewis Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Polyethylene. (Reinhold Pub. Corp., 1957), by Theodore O. J. Kresser (page images at HathiTrust)
• Development of modified polyolefin membranes for reverse osmosis (U.S. Dept. of the Interior, 1970), by H. F. Hamil, W. W. Harlowe, Southwest Research Institute, and United States. Office of Saline Water (page images at HathiTrust)
• Triboelectric effects on polyethylene methane drainage pipelines (U.S. Dept. of the Interior, Bureau of Mines, 1986), by A. A. Campoli, Roger L. King, and Joseph Cervik (page images at HathiTrust)
• Preliminary studies on the dewatering of coal-clay waste slurries using a flocculant (U.S. Dept. of the Interior, Bureau of Mines, 1982), by Jalna R. Zatko, Annie G. Smelley, and Bernard J. Scheiner (page images at HathiTrust)
• Polymerized trifluorochloroethylene (Atomic Energy Commission, 1947), by Plax Corporation and U.S. Atomic Energy Commission (page images at HathiTrust)
• A method of obtaining the ultraviolet and visible spectra of insoluble materials : use of a low-molecular-weight polyethylene as a matrix material (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Francis R. McDonald and Glenn L. Cook (page images at HathiTrust)
• Polyethylene terephthalate film, sheet, and strip from Japan and the Republic of Korea : determinations of the Commission in investigations nos. 731-TA-458 and 459 (final) under the Tariff Act of 1930, together with the information obtained in the investigations (U.S. International Trade Commission, 1991), by United States International Trade Commission (page images at HathiTrust)
• Polyethylene terephthalate film, sheet, and strip from Japan, the Republic of Korea and Taiwan : determinations of the Commission in investigations nos. 731-TA-458 through 460 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (U.S. International Trade Commission, 1990), by United States International Trade Commission (page images at HathiTrust)
• News and views of this kiln drying business : dip treatment in polyethylene glycol not effective in preventing surface checking (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1969), by Raymond Carl Rietz (page images at HathiTrust)
• Linear polyethylene and polypropylene: problems and opportunities. A report for businessmen (Kansas City, 1958), by Kansas City Polymer Associates and J. M. Beck (page images at HathiTrust)
• Influence of normal stress on creep in tension and compression of polyethylene and rigid polyvinyl chloride copolymer (Engineering Materials Research Laboratory, Division of Engineering, Brown University], 1960), by D. G. O'Connor, William Nichols Findley, and Brown University. Engineering Materials Research Laboratory (page images at HathiTrust)
• An examination of the damage tolerance enhancement of carbon/epoxy using an outer lamina of Spectra (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991), by D. G. Lance, A. T. Nettles, and George C. Marshall Space Flight Center (page images at HathiTrust)
• Effect of sliding speed and contact stress on tribological properties of ultra-high-molecular-weight polyethylene (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Robert L. Fusaro, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• The LET of 150-MeV protons and 70-MeV negative [pi] mesons near the end of the particle tracks in polyethylene (Brookhaven National Laboratory, 1971), by G.M. Tisljar-Lentulis, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The synthesis of deutero-polythene (Los Alamos Scientific Laboratory of the University of California, 1952), by A. R. Ronzio, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A polyethylene box-type mixer-settler extractor (Ames Laboratory at Iowa State College, 1958), by Lester L. Knapp, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Making polyethylene more disposable. (U.S. Environmental Protection Agency, 1973), by Irene Kiefer and United States Environmental Protection Agency (page images at HathiTrust)
• Research into materials and methods to produce polyethylene linings on concrete and other surfaces : progress report. (Technical Information Service, 1953), by R. A. Wiese and U.S. Atomic Energy Commission (page images at HathiTrust)
• Temperature dependence of the neutron transport cross section in paraffin and polyethylene (Knolls Atomic Power Laboratory, General Electric Company, 1962), by L. J. Esch, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Feasibility study of the disposal of polyethylene plastic waste (U.S. Environmental Protection Agency; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1971), by Kurt Gutfreund and United States. Solid Wastes Program (page images at HathiTrust)
• A balloon design for 9000 pounds at 90,000 feet : recommendations based on heavy-load balloon history (Hanscom AFB, Massachusetts : Air Force Geophysics Laboratory, Air Force Systems Command, United States Air Force, 1983., 1983), by James F. Dwyer and U.S. Air Force Geophysics Laboratory (page images at HathiTrust)
• Polyethylene free balloon design from the perspectives of user and designer (Hanscomb AFB, Massachusetts : Aerospace Instrumentation Division, Air Force Geophysics Laboratory, Air Force Systems Command, United States Air Force, 1982., 1982), by James F. Dwyer and U.S. Air Force Geophysics Laboratory (page images at HathiTrust)
• Graft polymerization of polyethylene by [gamma]-ray (U.S. Atomic Energy Commission, Office of Technical Information, 1961), by Masatosi Miura and U.S. Atomic Energy Commission (page images at HathiTrust)
• An integral method of non-isthermal kinetic analysis (Federal Aviation Administration, Office of Aviation Research ;, 1996), by Richard E. Lyon, United States. Federal Aviation Administration. Fire Research Section, and United States. Office of Aviation Research (page images at HathiTrust)
• Los Alamos Scientific Laboratory of the University of California. Report LA-2717 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, University of California, 1965., 1965), by Stephen A. McGuire, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A small, inexpensive albedo-neutron dosimeter (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1973., 1973), by Dale E. Hankins, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)

• The Characterization of linear polyethylene SRM 1475. Herman L. Wagner and Peter H. Verdier, editors, Institute for Materials Research, National Bureau of Standards. (U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1972), by Peter H. Verdier, Herman L. Wagner, United States. National Bureau of Standards, and Institute for Materials Research (U.S.) (page images at HathiTrust; US access only)

• Determining the molecular weight of polyethyleneterephthalate from the terminal radicals (National Aeronautics and Space Administration, 1964), by S. P. Matveyeva and V. A. Mi︠a︡gkov (page images at HathiTrust)

• Oxygen diffusion and reaction during gamma irradiation (U.S. Atomic Energy Commission, 1960), by R. C. Giberson, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Effect of sterilization irradiation on friction and wear of ultrahigh-molecular-weight polyethylene (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by William R. Jones, Aldo M. Crugnola, William F. Hady, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• The effects of alpha particles on low density polyethylene (Aberdeen, Maryland : Aberdeen Proving Ground, 1962., 1962), by Joe A. Swisher, U.S. Atomic Energy Commission, and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• High-pressure gamma loop for Brookhaven National Laboratory (Brookhaven National Laboratory, 1963), by Brookhaven National Laboratory, U.S. Atomic Energy Commission, and Burns and Roe (page images at HathiTrust)
• Irradiation of plastic fuel tapes (Pittsburgh, Pennsylvania. : Atomic Power Division, Westinghouse Electric Corporation, 1954., 1954), by R. T. Jones, W. F. Witzig, U.S. Atomic Energy Commission, and Westinghouse Electric Corporation. Atomic Power Division (page images at HathiTrust)

• The conductivity change in good insulators during [gamma]-irradiation : the conductivity of Teflon (Washington, D.C. : Office of Technical Services, Department of Commerce, 1952., 1952), by Sumner Mayburg, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation. Atomic Power Division, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Oxygen diffusion and reaction during gamma irradiation (U.S. Atomic Energy Commission, 1960), by R. C. Giberson, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)

• Polyethylene film ([Washington, D.C.] : U.S. Department of Commerce, National Bureau of Standards, Office of Commodity Standards, [1964], 1964), by United States. National Bureau of Standards (page images at HathiTrust)

• Polyester film for oxygen gas transmission measurements : SRM 1470 (Dept. of Commerce, National Bureau of Standards :, 1979), by John D. Barnes and Gordon M. Martin (page images at HathiTrust)
• Effects of anealing upon shear modulus and density of linear polyethylene (Textile Research Institute, 1962), by T. Shibukawa and N. J.) Textile Research Institute (Princeton (page images at HathiTrust)

• An evaluation of black polyethylene as a skin simulant under fabrics to thermal radiant energy (Rochester, New York : University of Rochester, Atomic Energy Project, 1954., 1954), by George Mixter, Thomas P. Davis, and University of Rochester. Atomic Energy Project (page images at HathiTrust)

• State of the art: methods of bonding fluorocarbon plastics to structural materials. (Plastics Technical Evaluation Center, 1961), by Marjorie C St. Cyr and Plastics Technical Evaluation Center (U.S.) (page images at HathiTrust)
• Design and testing of a teflon lined plug valve : period of work: April 29, 1948 - August 9, 1948 (U.S. Atomic Energy Commission. Technical Information Division, 1950), by C. D. Watson, G. A. West, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• NASA TN D-4022 (National Aeronautics and Space Administration ;, 1967), by Leland H. Jorgensen, Jack R. Hagen, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Cooling requirements of ball bearings lubricated by glass-fiber-filled polytetrafluoroethylene retainers in cold hydrogen gas (National Aeronautics and Space Administration ;, 1970), by Harold H. Coe, Herbert W. Scibbe, David E. Brewe, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Adhesion and transfer of polytetrafluoroethylene to metals studied by Auger emission spectroscopy (National Aeronautics and Space Administration ;, 1972), by Stephen V. Pepper, Donald H. Buckley, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6302 (National Aeronautics and Space Administration:, 1971), by Cecil E. Kirby (page images at HathiTrust; US access only)
• Fabrication of teflon by hydrostatic pressing (Los Alamos Scientific Laboratory of the University of California, 1965), by James S. Church, J. H. Bell, Haskell Sheinberg, J. K. Donahoe, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Fabrication of teflon critical experiment fuel elements (Technical Publications, 1956), by J. L. Swanson, F. H. Welch, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• Final report on manufacturing methods for metallized Teflon capacitors (subminiature 200C) (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Douglas H. Smith, United States. Air Force. Systems Command. Aeronautical Systems Division, and Aeronautical Systems Division (U.S.) (page images at HathiTrust)

More items available under broader and related terms at left.