The Online Books Page

Vacuum pumps

See also what's at Wikipedia, your library, or elsewhere.

• Pumping machinery
• Vacuum technology

• Vacuum pumps -- Equipment and supplies
• Vacuum pumps -- Experiments
• Vacuum pumps -- Testing
• Ion pumps

• Production and measurement of high vacuum (General Electric review, 1922), by Saul Dushman (page images at HathiTrust)
• High vacua; principles, production, and measurement. (D. Van Nostrand, 1947), by Swami Jnanananda (page images at HathiTrust)
• High vacua (Longmans, Green and co. ltd. , 1927), by G. W. C. Kaye (page images at HathiTrust; US access only)
• Vacuum practice (Van Nostrand, 1926), by Louis Dunoyer and J. H. Smith (page images at HathiTrust)
• New developments in vacuum engineering; an atomic energy, an atomic energy [!] (Hobart publishing company, 1947), by Robert Byron Jacobs and Herbert Zuhr (page images at HathiTrust)
• The design of high vacuum systems and the application of Kinney high vacuum pumps. (Kinney Manufacturing Division, 1955), by Chester Murray Van Atta (page images at HathiTrust)
• Physik und Technik des Hochvakuums (F. Vieweg & Sohn Akt-ges., 1926), by Alexander Goetz (page images at HathiTrust; US access only)
• Liquid sodium pump for the purification of inert atmospheres (University of California Radiation Laboratory, 1950), by Russell Keith Edwards, LeRoy A. Bromley, Raleigh L. McKisson, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Physik und Technik des Hochvakuums (Friedr. Vieweg & Sohn Akt.-Ges., 1922), by Alexander Goetz (page images at HathiTrust; US access only)
• Low pressures (Van Nostrand, 1925), by F. H. Newman (page images at HathiTrust)
• Better vacuum by removal of diffusion-pump-oil contaminants (National Aeronautics and Space Administration ;, 1975), by Alvin E. Buggele and Lewis Research Center (page images at HathiTrust)
• Venturi air-jet vacuum ejectors for high-volume atmospheric sampling on aircraft platforms (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Gerald Franklin Hill and Langley Research Center (page images at HathiTrust)
• Experimental operating performance of a single-stage annular air ejector (National Aeronautics and Space Administration, 1959), by Robert R. Howell and Langley Research Center (page images at HathiTrust)
• Vacuum testing at SAM Laboratories (U.S. Atomic Energy Commission, Technical Information Division, 1948), by S. Bashkin, C. R. A. Rice, F. S. Stein, J. E. Binns, Columbia University, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Pumping speed of oil diffusion pumps for hydrogen and air (U.S. Atomic Energy Commission, Technical Information Division, 1950), by Harry Reese, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A high vacuum high speed ion pump ([Lawrence] Radiation Laboratory, 1952), by John Stuart Foster, E. J. Lofgren, Ernest Orlando Lawrence, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vacuum system for a 30 Bev accelerator (Brookhaven National Laboratory], 1956), by C. L. Gould, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Automatic variation of gas pressure and its application to a vacuum pump, circulation of gases, magnetic stirrer ([s.n.], 1929), by Otto Maass (page images at HathiTrust; US access only)
• Sprengel's vacuum-pump (commonly called "Bunsen's pump"). (London, etc., 1881), by Hermann Sprengel (page images at HathiTrust)
• An electric discharge as a trap for diffusion pump vacuum systems (Denver, Colorado : Dow Chemical Company, Rocky Flats Plant ; Washington, D.C : Office of Technical Services, Department of Commerce, 1965., 1965), by R. O. Adams, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)
• On the theory of steam-jet vacuum pumps ([U.S. Atomic Energy Commission], 1955), by I. M. Lifshit͡s, L. N. Rozent͡sveĭg, and U.S. Atomic Energy Commission (page images at HathiTrust)

• A mass spectrometric analysis of DC 704 diffusion-pump oil fragmentation (National Aeronautics and Space Administration ;, 1965), by H. Shapiro, B. N. Paxson, and Goddard Space Flight Center (page images at HathiTrust)

• Experiments on the production of high vacua (1919), by Beryl Franklin Love (page images at HathiTrust; US access only)

• A technique for cryopumping hydrogen (National Aeronautics and Space Administration, 1961), by Jack Grobman and Lewis Research Center (page images at HathiTrust)

• Design of radiation heated cathodes for ion pumps (University of California Radiation Laboratory, 1952), by W. E. Bush, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Steam, Air and Gas Power (fourth edition; New York: J. Wiley and Sons; London: Chapman and Hall, 1948), by William H. Severns and Howard Edward Degler (page images at HathiTrust)
• Pumping in the chemical works (Benn brothers, limited, 1922), by Norman Swindin (page images at HathiTrust; US access only)
• Tankerman's handbook; a guide to loading and discharging oil cargoes. (E. W. Sweetman, 1950), by Richard G. Wooler (page images at HathiTrust)
• A treatise on applied hydraulics (John Wiley & sons, inc., 1945), by Herbert Addison (page images at HathiTrust)
• Cameron hydraulic data, a handy reference on the subjects of hydraulics, steam and water vapor (Ingersoll-Rand Company, Cameron Pump Division, 1942), by Ingersoll-Rand Company, Allan Wright Loomis, and G. V. Shaw (page images at HathiTrust)
• Practical irrigation and pumping; water requirements, methods of irrigation and analyses of cost and profit (John Wiley & Sons; [etc., etc.], 1915), by B. P. Fleming (page images at HathiTrust)
• Cost of pumping from wells for the irrigation of rice in Louisiana and Arkansas. (Govt. print. off., 1908), by William Benjamin Gregory (page images at HathiTrust)
• Mechanical tests of pumps and pumping plants used for irrigation and drainage in Louisiana in 1905 and 1906. (Govt. print. off., 1907), by William Benjamin Gregory (page images at HathiTrust)
• Mechanical tests of pumping plants in California. (Govt. print. off., 1907), by Joseph N. LeConte and Clarence Everett Tait (page images at HathiTrust)
• Mine drainage : being a complete and practical treatise on direct-acting underground steam pumping machinery ; with a description of a large number of the best known engines, their general utility and the special sphere of their action, the mode of their application, and their merits compared with other forms of pumping machinery (Crosby Lockwood and Co., 1881), by Stephen Michell (page images at HathiTrust)
• Die wasserförderung, umfassend brunnenanlagen, kleinere wasserleitungen, pumpen und spritzen (F. Voigt, 1907), by U. Mohr and Paul Wilhelm Ludwig Roch (page images at HathiTrust; US access only)
• Fire pumps and hydraulics : dealing with the construction, operation and maintenance of power-driven fire pumps, including reciprocating, rotary and centrifugal, with a clear explanation of the hydraulic principles involved. (Chemical publishing company, inc., 1943), by J. E Potts and T. H. Harriss (page images at HathiTrust)
• Thermodynamics of boiler feeding (Hydraulic institute, 1942), by Igor J. Karassik and Hydraulic Institute (U.S.) (page images at HathiTrust)
• Steam power plant auxiliaries and accessories (McGraw-Hill Book Company, Inc., 1946), by Terrell Croft and D. J. Duffin (page images at HathiTrust; US access only)
• Steam condensing plant; a brief account of the constructional and principles involved in the design of steam condensing plant, intended for those engaged in installing, maintaining or operating steam power plant (Sir I. Pitman & sons, ltd., 1928), by John Evans (page images at HathiTrust; US access only)
• Condensing plant (Sir I. Pitman & sons, ltd., 1926), by Rudolph John Kaula and Isaac Vincent Robinson (page images at HathiTrust; US access only)
• Pumps and hydraulics (Theo. Audel, 1905), by N. Hawkins (page images at HathiTrust)
• Pumping machinery : a practical hand-book relating to the construction and management of steam and power pumping machines (J.B. Lippencott, 1908), by William M. Barr (page images at HathiTrust; US access only)
• The efficiency of pumps and ejectors (Van Nostrand, 1920), by Edward Cyril Bowden-Smith (page images at HathiTrust)
• Modern pumping and hydraulic machinery as applied to all purposes, with explanation of the theoretical principles involved, construction, working, and relative advantages. Being a practical handbook for engineers, designers and others. (Griffin, 1913), by Edward Butler (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern: (D. Appleton & company;, 1846), by Thomas Ewbank (page images at HathiTrust)
• Audels pumps, hydraulics, air compressors : a practical guide covering theory, construction and operation of modern pumps, hydraulic machinery, air compressors and blowers (T. Audel & Co., 1943), by Frank Duncan Graham and Ohio) Hydraulic Institute (Cleveland (page images at HathiTrust; US access only)
• Pumping machinery; a treatise on the history, design, construction and operation of various forms of pumps (J. Wiley & sons; [etc., etc.], 1911), by Arthur Maurice Greene (page images at HathiTrust; US access only)
• Pumping machinery, a treatise on the history, design, construction and operation of various forms of pumps (John Wiley & Sons, inc.; [etc., etc.], 1919), by Arthur Maurice Greene (page images at HathiTrust)
• Standards of the Hydraulic society ([New York], 1927), by Hydraulic Institute (U.S.) (page images at HathiTrust)
• Standards of Hydraulic institute ... ([New York], 1936), by Hydraulic Institute (U.S.) (page images at HathiTrust)
• Handbook of the collections illustrating pumping machinery (H. M. Stationery off., 1932), by Science Museum (Great Britain) and Gerald Francis Westcott (page images at HathiTrust)
• Pumps and pumping; a practical manual on the operation, installation, and maintenance of reciprocating, centrifugal, and rotary pumps. (Chemical publishing company, inc., 1941), by Edward Molloy (page images at HathiTrust)
• The modern theory and practice of pumping; a treatise on the application of the Reynolds-Stanton law of viscous flow to modern pumping problems and the flow of liquids through pipes (E. Benn limited, 1924), by Norman Swindon (page images at HathiTrust; US access only)
• An experimental inquiry concerning the relative power of (J. Weale, 1841), by Thomas Wicksteed (page images at HathiTrust)
• Die selbsttätigen pumpenventile in den letzten 50 jahren; ihre bewegung und berechnung (J. Springer, 1925), by Robert Stückle (page images at HathiTrust; US access only)
• Pumps; troubles and remedies (Hill publishing company, 1908), by Hubert E. Collins (page images at HathiTrust)
• Pumping engines for water works (McGraw Publishing Company, 1907), by Charles Arthur Hague (page images at HathiTrust)
• Worthington pump handbook; design, construction and application of all commercial types of pumps (Worthington Pump and Machinery Corporation, 1927), by Worthington Pump and Machinery Corporation (page images at HathiTrust)
• Die kolbenpumpen, einschliesslich der flügel- und rotationspumpen (J. Springer, 1914), by Heinrich Berg (page images at HathiTrust; US access only)
• Positive-displacement pumps and fluid motors. (Pitman Pub. Corp., 1950), by Warren Elvin Wilson (page images at HathiTrust)
• Centrifugal pumps (McGraw-Hill Book Company, inc., 1915), by Robert L. Daugherty (page images at HathiTrust)
• Centrifugal pumping machinery (McGraw-Hill book company, 1912), by Carl George De Laval (page images at HathiTrust)
• Centrifugal pumps, their design and construction (D. Van Nostrand, 1911), by Louis Centennial Loewenstein and Clarence Philip Crissey (page images at HathiTrust)
• Die kreiselpumpen (J. Springer, 1924), by Carl Pfleiderer (page images at HathiTrust; US access only)
• An investigation of the air lift pump (Madison, Wis., 1911), by George Jacob Davis and Carl Robert Weidner (page images at HathiTrust)
• Pumping by compressed air (J. Wiley & sons, inc.; [etc., etc.], 1920), by Edmund Masters Ivens (page images at HathiTrust)
• Pumps and pumping machinery. (E. & F. N. Spon, 1882), by Frederick Colyer (page images at HathiTrust)
• Pumpen-anlagen; aufgaben aus der praxis mit lösungen (W. de Gruyter & co., 1928), by Fr Krauss (page images at HathiTrust; US access only)
• "The use of shallow wells in forest fire suppression" ([Lansing, 1934), by Roscommon Michigan. Forest fire experiment station, Lake states United States. Forest experiment station, and Michigan. Department of Conservation (page images at HathiTrust)
• Theoria cochleae Archimedis ab observationibus, experimentis, et analyticis rationibus ducta, auctore Jacobo Bellogrado ... (P. Carmignani, 1767), by Jacopo Bellgrado (page images at HathiTrust)
• A text book of applied hydraulics (J. Wiley & sons, 1938), by Herbert Addison (page images at HathiTrust)
• Boilers, pipes and piping, pumps (McGraw-Hill book company, inc.;, 1908), by Hubert E. Collins (page images at HathiTrust; US access only)
• Modern practice in steam condensing plants, a practical treatise (C. Lockwood and Son, 1925), by Arthur Reginald Wright (page images at HathiTrust; US access only)
• The centrifugal pump, turbines, and water motors : including the theory and practice of hydraulics. (Specially adapted for engineers.) (The Technical publishing company limited;, 1898), by Charles Herbert Innes (page images at HathiTrust; US access only)
• Hydraulic motors. (J. Wiley & Son, 1869), by Jacques Antoine Charles Bresse, James B. Francis, D. H. Mahan, and F. A. Mahan (page images at HathiTrust)
• Pumps and pumping; a hand-book for pump users, being notes on selection, construction, and management. (Lockwood, 1892), by M. Powis Bale (page images at HathiTrust)
• Pumping machinery. A practical hand-book relating to the construction and management of steam and power pumping machines (J. B. Lippincott company, 1893), by William M. Barr (page images at HathiTrust)
• Pump handbook. (National Press, 1948), by Volney Cecil Finch (page images at HathiTrust)
• The mechanics of pumping machinery; a text-book for technical schools and a guide for practical engineers (Macmillan and Co., limited;, 1897), by Julius Weisbach, Karl P. Dahlstrom, and Gustav Herrmann (page images at HathiTrust)
• Reports of tests made by Prof. W.F.M. Goss ... on a vertical triple expansion crank and fly wheel pumping engine having a daily capacity of 20,000,000 U.S. gallons. (Gies & co., 1899), by William Freeman Myrick Goss, George Hale Barrus, Snow Steam Pump Works, and Indianapolis Water Company (page images at HathiTrust)
• Duty and capacity tests of Worthington high duty pumping engines on water works and pipe line services. (H.R. Worthington, 1892), by Henry R Worthington (page images at HathiTrust)
• Die kolbenpumpen, einschliesslich der flügel- und rotationspumpen (J. Springer, 1926), by Heinrich Berg (page images at HathiTrust; US access only)
• Standards of Hydraulic institute. ([New York, 1948), by Hydraulic Institute (U.S.) (page images at HathiTrust)
• Care and operation of pumping engines and units. (Austin, 1953), by University of Texas. Division of Extension. Industrial and Business Training Bureau and Texas. State Board for Vocational Education. Trade and Industrial Division (page images at HathiTrust)
• Disclosures on: autosort; an automatic collating and sorting machine, optical heterodyne refractometer, liquid metering pump, stable wide-band relaxation oscillator using three inverting amplifiers, and seat belt webbing abrasion resistance testing machine. (For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1967), by David Robbins and Alvin J. Englert (page images at HathiTrust)
• Solar powered circulation pump development : final report (Pacific Southwest Region, U.S. Dept. of Energy, 1980), by Alfred L. Johnson and United States. Department of Energy. Region IX. (page images at HathiTrust)
• Pumping by compressed air (John Wiley & sons, inc.; [etc., etc.], 1914), by Edmund Masters Ivens (page images at HathiTrust)
• The principles, construction, and application of pumping machinery (steam and water pressure) (C. Griffin & Co. ;, 1900), by Henry Davey (page images at HathiTrust)
• Centrifugal pumps and suction dredgers. (C. Griffin & Company, limited;, 1916), by Edward Washbourn Sargeant (page images at HathiTrust; US access only)
• Steam, air, and gas power (J. Wiley & Sons;, 1929), by William H. Severns and Howard Edward Degler (page images at HathiTrust; US access only)
• Rex pumpcrete practice : a manual of pipe line concreting methods (The Company, 1948), by Milwaukee Chain Belt Company (page images at HathiTrust)
• Traité théorique et pratique des pompes et machines à élever les eaux (E. Bernard et cie., 1885), by Louis Poillon (page images at HathiTrust)
• A text book of applied hydraulics (Wiley, 1934), by Herbert Addison (page images at HathiTrust)
• The centrifugal pump, turbines, and water motors: including the theory and practice of hydraulics. (The Technical Publishing Co., Limited;, 1901), by Charles Herbert Innes (page images at HathiTrust; US access only)
• Pumps and pumping : a hand-book for pump users ; being notes on selection, construction, and management (C. Lockwood and Son, 1901), by M. Powis Bale (page images at HathiTrust)
• Pumping machinery : a practical hand-book relating to the construction and management of steam and power pumping machines, with upwards of 260 engravings, covering every essential detail in pump construction (J. B. Lippincott, 1893), by William M. Barr (page images at HathiTrust)
• British progress in pumps and pumping engines (A. Constable & Co., Ltd., 1905), by Philip R. Björling (page images at HathiTrust; US access only)
• Pumps : their construction and management (P.S. King & Son, 1902), by Philip R. Björling (page images at HathiTrust; US access only)
• The construction of pump details. (E. & F.N. Spon ;, 1892), by Philip R. Björling (page images at HathiTrust)
• Pumps and pumping machinery. (E. & F.N. Spon, 1882), by Frederick Colyer (page images at HathiTrust)
• Turbines hydrauliques, pompes et ventilateurs centrifuges; principes théoriques, dispositions pratiques et calcul des dimensions (Impr. liégeoise, 1900), by J. Henrotte (page images at HathiTrust; US access only)
• Pumping and water power; a guide to the hydraulic laws and conditions influencing pumping operations and to the efficient use of pumping and water power apparatus with rules and tables bearing thereupon, especially compiled for students, mechanics, and intending users of hydraulic machinery. Fifty-one illus. and ten tables. (E. & F.N. Spon;, 1912), by Fred. A. Bradley (page images at HathiTrust; US access only)
• Centrifugal pumps (Scott, Greenwood, 1921), by John Wells Cameron (page images at HathiTrust; US access only)
• The principles, construction, and application of pumping machinery (steam and water pressure) with practical illustrations of engines and pumps applied to mining, town water supply, drainage of lands, etc. also economy and efficiency trials of pumping machinery. (C. Griffin & Company, Limited, 1905), by Henry Davey (page images at HathiTrust)
• Die pumpen : Berechnung und ausführung der für die förderung von flüssigkeiten gebräuchlichen maschinen-- (Julius Springer, 1889), by Konrad Hartmann (page images at HathiTrust)
• Centrifugal pumps, their design, operation and testing (C. Lockwood and son, 1926), by George Higgins (page images at HathiTrust; US access only)
• Notes on the construction and working of pumps (Technical Publishing Co. ;, 1907), by Edward C. R. Marks (page images at HathiTrust; US access only)
• Notes on the construction and working of pumps. (Technical Publishing Co., 1902), by Edward C. R. Marks (page images at HathiTrust)
• Direct-acting steam pumps (McGraw-Hill, 1915), by Frank Ferdinand Nickel (page images at HathiTrust)
• The modern theory and practice of pumping : a treatise on the application of the Reynolds-Stanton law of viscous flow to modern pumping problems and the flow of liquids through pipes (D. Van Nostrand, 1924), by Norman Swindin (page images at HathiTrust)
• Les pompes (V.C. Dunod, 1905), by R. Masse and Haton de La Goupillière (page images at HathiTrust; US access only)
• Steam power plant auxiliaries and accessories (McGraw-Hill book company, Inc., 1922), by Terrell Croft and Daniel John Dufflin (page images at HathiTrust)
• Steam condensing plant in theory and practice (Van Nostrand, 1925), by James Sim (page images at HathiTrust)
• La mécanique générale à l'exposition de Chicago : moteurs à vapeur, à gaz, à air hydraulique, pompes grandes installations mécaniques (E. Bernard et Cie, 1894), by Antoine Grille and Henri Falconnet (page images at HathiTrust)
• Steam boilers, steam pumps (International Textbook Co., 1902), by International Textbook Company and International Correspondence Schools (page images at HathiTrust)
• Steam engines; steam pumps (International Textbook Company, 1902), by International Textbook Company and International Correspondence Schools (page images at HathiTrust)
• Steam engines, steam pumps (International Textbook Co., 1920), by International Correspondence Schools (page images at HathiTrust)
• A coal-fired water pump (U.S. Dept. of the Interior, Bureau of Mines, 1966), by R. w Hiteshue, P. S. Lewis, Walter Kawa, John E. Zeilinger, and United States Bureau of Mines (page images at HathiTrust)
• Steam condensing plant, in theory and practice (Blackie, 1926), by James Sim (page images at HathiTrust; US access only)
• Modern pumping and hydraulic machinery as applied to all purposes, with explanation of the theoretical principles involved, construction, working, and relative advantages. Being a practical handbook for engineers, designers, and others. (C. Griffin and company, limited, 1922), by Edward Butler (page images at HathiTrust; US access only)
• Pumps and pumping : hand-book for pump users, being notes on selection, construction, and management (C. Lockwood and Son, 1889), by M. Powis Bale (page images at HathiTrust)
• Union engineering handbook; pumping machinery, air compressors, condensers (Union steam pump co., 1921), by Earl P. Ordway and Union Steam Pump Company (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern: with observations on various subjects connected with the mechanic arts: including the progressive development of the steam engine ... In five books, illustrated by nearly three hundred engravings. (Greeley & McElrath, 1849), by Thomas Ewbank (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern : with observations on various subjects connected with the mechanic arts, including the progressive development of the steam engine ... in five books, illustrated by nearly three hundred engravings (Derby & Jackson, 1858), by Thomas Ewbank (page images at HathiTrust)
• A description of the differential expansive pumping engine, giving practical examples of engines at work, and a list of some of the engines already made, with useful notes and formula for pumps and pumping engines (Spon, 1880), by Henry Davey (page images at HathiTrust)
• Conservation & distribution of water for irrigation ... (H.R. Worthington Hydraulic Works, 1917), by Henry R. Worthington (page images at HathiTrust)
• Tabulated values of cavitation B-factor for helium, H₂, N₂, F₂, O₂, refrigerant 114, and H₂O (U.S. Dept. of Commerce, National Bureau of Standards, for sale by Supt. of Docs., U.S. Govt. Print. Off., 1971), by J. Hord and R. O. Voth (page images at HathiTrust)
• The solar powered irrigation pump. (Dept. of Energy, Office of Public Affairs, 1978), by United States. Dept. of Energy. Office of Public Affairs (page images at HathiTrust)
• Range water pumping systems : State-of-the-art review (U.S. Dept. of Agriculture, Forest Service Equipment Development Center, 1985), by Dan W. McKenzie (page images at HathiTrust)
• Measuring saturated hydraulic conductivity of soils. (St. Joseph, Mich., 1962), by American Society of Agricultural Engineers. Drainage Research Committee (page images at HathiTrust; US access only)
• Testing of a "Dura Seal" rotary seal (Atomic Energy Commission, 1947), by T. H. Mauney, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Design, development, and operation of metal-diaphragm reactor-service pumps (Oak Ridge National Laboratory, 1960), by E. C. Hise, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Experimental Engineering Division (page images at HathiTrust)
• Level transducers for liquid metals (Oak Ridge National Laboratory, 1960), by R. G. Affel, R. E. Pidgeon, G. H. Burger, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Instrumentation and Controls Division (page images at HathiTrust)
• Die Baumaschinen. (W. Engelmann, 1883), by Ludwig Franzius and Felix Lincke (page images at HathiTrust)
• Direct-acting steam pumps (McGraw-Hill book company, inc., 1923), by Frank Ferdinand Nickel (page images at HathiTrust)
• The pump catechism : a practical help to runners, owners and makers of pumps of any kind; covering the theory and practice of designing, constructing, erecting, connecting and adjusting (Practical Publishing Co., 1889), by Robert Grimshaw (page images at HathiTrust)
• The Worthington steam pumping engine; history of its invention and development. Consideration of its duty performances. Its application to reservoir, standpipe and direct pressure systems of water supply. Description of Worthington water meters, etc. (New York, 1887), by Henry R. Worthington (page images at HathiTrust)
• Mine drainage being a complete practical treatise on direct-acting underground steam pumping machinery. (London :, 1881), by Stephen Michell (page images at HathiTrust)
• Genesis of the centrifugal pump. (Colorado Scientific Society, 1915), by Albert E. Guy (page images at HathiTrust)
• Pumps and pumping : notes on selection, construction, and management. ([s.n.], 1906), by M. Powis Bale (page images at HathiTrust)
• Pumping machinery : a practical hand-book relating to the construction and management of steam and power pumping machines (J.B. Lippincott, 1909), by William M. Barr (page images at HathiTrust)
• Water-wheels, or hydraulic motors (J. Wiley & Sons, 1876), by Jacques Antoine Charles Bresse and F. A. Mahan (page images at HathiTrust)
• Official reports of various duty trials of the Gaskill pumping engines. ([s.n.], 1891), by Holly Manufacturing Co (page images at HathiTrust)
• A description of the differential expansive pumping engine, with useful notes ... (Leeds, 1875), by Henry Davey (page images at HathiTrust)
• Questions and answers on pumps and pumping machinery. (Joseph G. Branch Pub. Co., 1912), by William Henry Wakeman (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern: with observations on various subjects connected with the mechanic arts: including the progressive development of the steam engine ... In five books. Illustrated by nearly three hundred engravings. (D. Appleton and company, 1842), by Thomas Ewbank (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines : or raising water, ancient and modern; with observations on various subjects connected with the mechancis arts (Scribner, Armstrong, 1876), by Thomas Ewbank (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern : with observations on various subjects connected with the mechanic arts, including the progressive development of the steam engine. In five books. (Derby & Jackson, 1857), by Thomas Ewbank (page images at HathiTrust)
• The pump catechism: a practical help to runners, owners and makers of pumps of any kind. Covering the theory and practice of designing, constructing, erecting, connecting and adjusting. (Practical publishing co., 1888), by Robert Grimshaw (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern : with observations on various subjects connected with the mechanic arts, including the progressive development of the steam engine ... : in five books Illustrated by nearly three hundred engravings (Bangs, Platt, & Co., 1851), by Thomas Ewbank (page images at HathiTrust)
• Der Brunnen-, Röhren-, Pumpen- und Spritzenmeister. Ein Handbuch für Alle, welche sich mit Verfertigung hydraulischer Maschinen, sowie mit Brunnenanlagen, Feuerspritzen, Wasserleitungen beschäftigen, Besitzer hydraulischer Werke sind, oder Aufsicht darüber führen. Nebst Erklärung der bei diesen Werken und Arbeiten vorkommenden Kunstausdrücke ... (B.F. Voigt, 1864), by A. W. Hertel (page images at HathiTrust)
• Duty trial of a pumping engine ... built by the I.P. Morris Co. ... (Philadelphia, 1895), by Ky.) Louisville Water Company (Louisville (page images at HathiTrust)
• Pumpen, hydraulische und pneumatische Anlagen. Ein kurzer Uberblick. (G.J. Göschen, 1906), by Rudolf Vogot (page images at HathiTrust; US access only)
• Duty tests of pumping engines, and reprint of Dr. R.H. Thurston's paper on The maximum contemporary economy of the high-pressure multiple-expansion steam engine ... (The Evening Wisconsin Company, 1894), by Edward P. Allis Co and Robert Henry Thurston (page images at HathiTrust)
• Duty trial of a pumping engine for the Louisville Water Company, Louisville, Ky. Built by I.P. Morris Company, owned and conducted by the William Cramp & Sons Ship and Engine Building Co., Philadelphia, Pa., 1895. ([Louisville?, 1895), by Ky.) Louisville Water Company (Louisville (page images at HathiTrust)
• Appendix G to the new edition of Tredgold on the steam engine and on steam navigation (Weale, 1844), by William Pole (page images at HathiTrust)
• The care and maintenance of pumps and water systems. (F. E. Myers & Bro. co., 1942), by F. E. and Bro. co Myers (page images at HathiTrust)
• Pumps in the power plant ... (Power Plant Engineering, 1918), by Ralph Emerson Turner (page images at HathiTrust)
• Final report on the feasibility of using wind power to pump irrigation water ... (Governor's Energy Advisory Council, Forecasting and Policy Analysis Division, 1977), by Earl Gilmore, Vaughn Nelson, and Robert E. Barieau (page images at HathiTrust; US access only)
• Pumps in power plants and industry (Technical Publishing Co., 1930) (page images at HathiTrust)
• Care and operation of pumping engines and units. ([Austin, 1949), by University of Texas. Division of Extension. Industrial and Business Training Bureau and American Petroleum Institute. Division of Production (page images at HathiTrust)
• Practical handbook on pump construction (E. & F. N. Spon, 1892), by Philip R. Björling (page images at HathiTrust)
• Chempup performance for high temperature organic service (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by R. G. Young, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Rubber tubing pump ([Lawrence] Radiation Laboratory, 1950), by John W. Weigl, Donald W. Stallings, and Lawrence Radiation Laboratory (page images at HathiTrust; US access only)
• Instructions for the operation, care, and repair of pumps. (Govt. Print. Off., 1922), by United States. Navy Department. Bureau of Engineering (page images at HathiTrust)
• Handbook of the collections illustrating pumping machinery (H. M. Stationery Off., 1932), by Science Museum (Great Britain) and Gerald Francis Westcott (page images at HathiTrust)
• Die Pumpen, deren Berechnung und Konstruktion. (O. Leiner, 1912), by Hugo Bethmann (page images at HathiTrust; US access only)
• Pumpen und kompressoren : handbuch für berechnung, entwurf, bau, betrieb, untersuchung und verbesserung von pumpen- und kompressoranlagen. (O. Haeder, 1914), by Hermann Haeder (page images at HathiTrust; US access only)
• Report, official duty test of booster pumps, Roseland pumping station, Chicago. ([Chicago, 1914), by Chicago (Ill.). Bureau of Engineering (page images at HathiTrust)
• Economical irrigation by pumping ... (American Well Works, 1912), by Ill.) American Well Works (Aurora (page images at HathiTrust)
• The use of windmills in irrigation in the semiarid West (U.S. Dept. of Agriculture, 1910), by P. E. Fuller (page images at HathiTrust)
• Land drainage by means of pumps (U.S. Dept. of Agriculture, 1915), by Sherman M. Woodward, Charles W. Okey, and United States Office of Experiment Stations (page images at HathiTrust)
• In the matter of certain centrifugal trash pumps : investigation no. 337-TA-43. (U.S. International Trade Commission, 1979), by United States International Trade Commission (page images at HathiTrust)
• Electromagnetic alkali metal pump research program (National Aeronautics and Space Administration, 1966), by J. P. Verkamp and R. G. Rhudy (page images at HathiTrust; US access only)
• NASA TN D-5919 (National Aeronautics and Space Administration :, 1970), by Douglas A. Anderson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-5318 (National Aeronautics and Space Administration ;, 1969), by Walter S. Cunnan, Dean C. Reemsnyder, George Kovich, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Response of a radial-bladed centrifugal pump to sinusoidal disturbances for noncavitating flow (National Aeronautics and Space Administration ;, 1971), by Douglas A. Anderson, William Stevans, Robert J. Blade, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Pump, pumping equipment and air compressor manufacturing corporations. ([Washington], 1941), by United States Federal Trade Commission (page images at HathiTrust; US access only)
• Durability tests of some agricultural sprayer pumps (Cornell University Agricultural Experiment Station, 1955), by W. W. Gunkel (page images at HathiTrust; US access only)
• Using water pumps for gathering maple sap (Agricultural Experiment Station, University of Vermont and State Agricultural College, 1960), by Earl L. Arnold (page images at HathiTrust; US access only)
• Pumping maple sap from the bucket to the gathering tank (Agricultural Experiment Station, University of Vermont and State Agricultural College, 1957), by Earl L. Arnold (page images at HathiTrust; US access only)
• Reports by mechanical engineers on trials of duty made in 1857 and 1859 upon the Brooklyn, Hartford, Belleville and Cambridge pumping engines. (NY, 1860), by Brooklyn. Board of Water Commissioners (page images at HathiTrust)
• Des machines et appareils destinés a l'élévation des eaux (L. Hachette et cie, 1863), by M. Morin (page images at HathiTrust)
• Common things explained. (Walton and Maberly, 1856), by Dionysius Lardner (page images at HathiTrust)
• Pulse transmission to a pulse column (Hanford Site (Wash.) ;, 1956), by C. Groot, V.R. Cooper, United States. Department of Energy. Office of Scientific and Technical Information, Hanford Site (Wash. ), and Hanford Atomic Products Operation (page images at HathiTrust)
• Pumping speed of oil diffusion pumps for hydrogen and air (U.S. Atomic Energy Commission, Technical Information Division, 1950), by Harry Reese, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Pulse pumping : a means transfer of pulse column fluids (Oak Ridge National Laboratory, 1957), by A. R. Irvine, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern : including the progressive development of the steam engine. (Tilt and Bogue, 1842), by Thomas Ewbank (page images at HathiTrust)
• Berechnung und Konstruktion der Schiffsmaschinen und-Kessel; ein Handbuch zum Gebrauch für Konstrukteure, Seemaschinisten und Studierende. (R. Oldenberg, 1908), by G. Bauer (page images at HathiTrust; US access only)
• Pumping machinery. A practical hand-book relating to the construction and management of steam and power pumping machines. (J.B. Lippincott Company, 1904), by William M. Barr (page images at HathiTrust)
• Pumps: historically, theoretically, and practically considered. (E. & F.N. Spon, 1890), by Philip R. Björling (page images at HathiTrust)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern: with observations on various subjects connected with the mechanic arts: including the progressive development of the steam engine ... (Greeley & McElrath, 1847), by Thomas Ewbank (page images at HathiTrust)
• The determination of the characteristics of the Starrett compressed air pump (1916), by Ed Eichler and Carl Sebastian (page images at HathiTrust)
• Efficiency test of Mare Island Dry Dock Pumping Unit "A" (1911), by J. Aspinwall (page images at HathiTrust)
• A centrifugal-pump target assembly for the cyclotron bombardment of liquids ([Lawrence] Radiation Laboratory, 1952), by Joseph G. Hamilton, Charles Corum, Harry Powell, Herman R. Haymond, Warren Manford Garrison, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A treatise on deep well pumps (1922), by J. Harold Kitchen and Alden L. Cowin (page images at HathiTrust)
• The pump catechism : a practical help to runners, owner, and makers of pumps of any kind. Covering the theory and practice of designing, constructing, erecting, connecting, and adjusting (Practical publishing co., 1900), by Robert Grimshaw (page images at HathiTrust; US access only)
• The centrifugal pump, turbines, and water motors : including the theory and practice of hydraulics. (Specially adapted for engineers.) (The Technical publishing co., limited ;, 1909), by Charles Herbert Innes (page images at HathiTrust; US access only)
• Union engineering handbook (Union steam pump co., 1921), by Earl P. Ordway and Union Steam Pump Company (page images at HathiTrust)
• Pumps and pump motors; a manual for the use of hydraulic engineers (E. & F.N. Spon;, 1895), by Philip R. Björling (page images at HathiTrust)
• Water and gas works appliances manufactured by R.D. Wood & Co. (Philadelphia, 1886), by R.D. Wood & Co (page images at HathiTrust)
• Practical handbook on pump construction (E. & F.N. Spon, 1912), by Philip R. Björling (page images at HathiTrust; US access only)
• A descriptive and historical account of hydraulic and other machines for raising water, ancient and modern: with observations on various subjects connected with the mechanic arts: including the progressive development of the steam engine...In five books. Illustrated by nearly three hundred engravings (Bangs, Platt, & co., 1850), by Thomas Ewbank (page images at HathiTrust)
• Development of composite components for the CCN-150-5C transfer pump (U.S. Coast Guard, Marine Safety and Environmental Protection ;, 1996), by George F. Wilhelmi, H. K. Telegadas, U.S. Coast Guard Research & Development Center, United States. Coast Guard. Marine Safety and Environmental Protection, and Naval Surface Warfare Center (U.S.). Carderock Division (page images at HathiTrust)
• Feasibility of using composite materials to reduce the weight of the CCN-150 transfer pump (U.S. Coast Guard, Marine Safety and Environmental Protection ;, 1997), by H. K. Telegadas, United States. Coast Guard. Marine Safety and Environmental Protection, U.S. Coast Guard Research & Development Center, and Naval Surface Warfare Center (U.S.). Carderock Division (page images at HathiTrust)
• Pumping machinery, ancient and modern : a lecture delivered before the class of mechanical engineering of Sibley College, Cornell University, April 26, 1889, (Printed for private circulation, 1889), by Josephus F. Holloway (page images at HathiTrust)
• Pumping for drainage in the San Joaquin Valley, California (University of California Print. Office, 1925), by Walter Wallace Weir (page images at HathiTrust)
• Irrigation pumps : their selection and use (College of Agriculture, University of California, 1952), by C. N. Johnston (page images at HathiTrust)
• Liquid manure pumps and equipment (College of Agriculture, University of California, 1947), by John B. Dobie (page images at HathiTrust)
• Pumps & hydraulic rams (D. McKay, 1907), by Paul N. Hasluck (page images at HathiTrust)
• Lift irrigation. (G.A. Natesan, 1912), by Alfred Chatterton (page images at HathiTrust; US access only)
• The inertia pump (U.S. Atomic Energy Commission, 1952), by Russell Wendt Dayton, W. H. Goldthwaite, E. M. Simons, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An investigation of the water pressure ejector (1908), by Mark Ross Haynes (page images at HathiTrust; US access only)
• Beiträge zur Theorie der Kolbenpumpen (Polytechnische Buchhandlung, 1911), by K. Mayer (page images at HathiTrust; US access only)
• Water supply and pumping machinery (The Works, 1890), by Knowles Steam Pump Works (page images at HathiTrust)
• Hydrostatics, pneumatics, hydraulics, elementary chemistry, heat, entropy and steam, steam-engine mechanism, steam-engine indicators and diagrams, simple non-condensing steam engines, compound and condensing engines, steam turbines. (International Textbook Co., 1908) (page images at HathiTrust)
• Description of the new pumping engines, at the Birmingham water works (Birmingham, 1853), by William S. Garland (page images at HathiTrust)
• Report of Samuel Risley, Esq., consulting engineer on the erection of a new steam-pumping apparatus for the Montreal water works. (Montreal Print. and Pub. Co., 1869), by Samuel Risley (page images at HathiTrust)
• The Improved injector the best boiler feeder known : simple in operation and absolutely certain of working under proper circumstances .. (s.n., 1800), by T. McAvity & Sons (page images at HathiTrust)
• Rapport de Sam. Risley, Ecr., ingénieur-consultant sur l'érection d'un nouvel appareil de pompes à vapeur pour l'aqueduc de Montréal. (s.n.], 1869), by Samuel Risley (page images at HathiTrust)
• Celebrated improved Sluthour pump adopted by the United States government, awarded the highest medal ... for sale by Gauthier-La Ferrière & Co., ... Montreal. (s.n., 1877), by Gauthier-La Ferrière & Co (page images at HathiTrust)
• The Improved diaphragm ship pump and Edson's diaphragm free pump manufactured under license from Jacob Edson and executor estate S.B. Loud, patented March 27, 1877, October 1, 1878, November 15, 1881. (s.n., 1881), by T. McAvity & Sons (page images at HathiTrust)
• Northey & Co. Pumping Machinery Toronto, Ont., office and works, cor. Front and Parliament Sts., September 1888. (s.n., 1888), by Northey & Co (page images at HathiTrust)
• Leakage of water from pump mechanical seals (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1961), by David L. Burns, J. E. Sides, U.S. Atomic Energy Commission, and Savannah River Laboratory (page images at HathiTrust)
• Steam pumps; instruction paper (American School of Correspondence, 1906), by Chicago American School of Correspondence and Arthur L. Rice (page images at HathiTrust)
• The construction of pump details. (E. & F.N. Spon, 1892), by Philip R. Björling (page images at HathiTrust)
• Construction der Kolben- und centrifugalpumpen Ventilatoren und Exhaustoren für technische Lehranstalten sowie für den praktischen Gebrauch (R. Gaertner, 1872), by C. Fink (page images at HathiTrust)
• The Worthington steam pumping engine : history of its invention and development. (Worthington?], 1876), by Henry Rossiter Worthington and Pa.) Centennial Exhibition (1876 : Philadelphia (page images at HathiTrust)
• Pumping machinery. (Lippincott, 1899), by William M. Barr (page images at HathiTrust)
• Pumps (American School, 1920), by Arthur L. Rice (page images at HathiTrust)
• Contract and specification for pumping engine no. 3, and three fire-box tubular boilers (Bradley & Gilbert, 1887), by Ky.) Louisville Water Company (Louisville (page images at HathiTrust)
• Reports on the trial of duty and capacity of the pumping-engines (Milwaukee Water Works?, 1875), by Milwaukee Water Works (page images at HathiTrust)
• Model study of the pump suction chamber for Dry Dock No. 4, Puget Sound Navy Yard (Waterways Experiment Station, 1942), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Pumping performance and turbidity generation of Model 600/100 PNEUMA pump : main text and appendixes A and B (Waterways Experiment Station ;, 1982), by Thomas W. Richardson, James D. Ethridge, Richard A. Shafer, John E. Hite, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
• Blue Waters Ditch pumping station, east St. Louis, Illinois : hydraulic model investigation (Waterways Experiment Station ;, 1982), by Stephen T. Maynord, U.S. Army Engineer Waterways Experiment Station, and United States. Army. Corps of Engineers. St. Louis District (page images at HathiTrust)
• Pumps and plumbing for the farmstead (U.S. Govt. Print. Off, 1948), by Tennessee Valley Authority. Commerce Department and G. E. Henderson (page images at HathiTrust; US access only)
• The efficiency of pumps and ejectors (Constable and Co., 1920), by Edward Cyril Bowden-Smith (page images at HathiTrust; US access only)
• Hand and power pumps for all uses; cistern and force pumps, well pumps and cylinders, spray pumps and nozzles, hydralic rams and pneumatic water systems, rotary, centrifugal and power deep well pumps, triplex power pumps, air compressors and pumps for special duties. (Salem, Ohio, 1916), by Salem Deming Co. (page images at HathiTrust)
• Pumping water for irrigation (Govt. Print. Off., 1896), by Herbert M. Wilson (page images at HathiTrust)
• Spraying pumps, well pumps, force pumps, nozzles, and spraying machines (Field Force Pump Co., 1897), by Field Force Pump Co (page images at HathiTrust)
• Spraying pumps, nozzles and machines (Field Force Pump Co., 1891), by Field Force Pump Co (page images at HathiTrust)
• Eclipse spray pumps Eureka (Patterson, 1895), by Morrill & Morley (page images at HathiTrust)
• Illustrated and descriptive catalogue of U.S. standard spray pumps (P.C. Lewis Mfg. Co., 1894), by P.C. Lewis Mfg. Co (page images at HathiTrust)
• Descriptive and illustrated catalogue of force pumps, fire extinguishers and agricultural syringes ("Recorder" Print., 1888), by Lewis & Cowles (page images at HathiTrust)
• Engineering operations in redeeming overflowed lands (1914), by Harris Jacob Harman (page images at HathiTrust; US access only)
• Design summary report of Lithium Cooled Reactor Experiment primary coolant pumps and sump. (Middletown, Connecticut : Pratt & Whitney Aircraft Division, United Aircraft Corporation, CANEL Operations ; Washington, D.C. : Available from the Office of Technical Services, 1963., 1963), by C. Ferguson, H.P. Odom, D. V. Manfredi, B.R. Lucas, R.P. Lamers, L. K. Knudsen, U.S. Atomic Energy Commission, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• Design summary report of Lithium Cooled Reactor Experiment reflector coolant pumps and sump. (Middletown, Connecticut : Pratt & Whitney Aircraft Division, United Aircraft Corporation, CANEL Operations ; Washington, D.C. : Available from the Office of Technical Services, 1963., 1963), by C. Ferguson, H.P. Odom, D. V. Manfredi, B.R. Lucas, R.P. Lamers, L. K. Knudsen, U.S. Atomic Energy Commission, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• Design summary report of Lithium Cooled Reactor Experiment secondary coolant pump and sump. (Middletown, Connecticut : Pratt & Whitney Aircraft Division, United Aircraft Corporation, CANEL Operations ; Washington, D.C. : Available from the Office of Technical Services, 1964., 1964), by C. Ferguson, H.P. Odom, H. Welna, H.V. Marman, B.R. Lucas, R.P. Lamers, L. K. Knudsen, U.S. Atomic Energy Commission, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• An electric discharge as a trap for diffusion pump vacuum systems (Denver, Colorado : Dow Chemical Company, Rocky Flats Plant ; Washington, D.C : Office of Technical Services, Department of Commerce, 1965., 1965), by R. O. Adams, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)
• Planning a domestic groundwater supply system (Illinois State Water Survey, 1973), by James P. Gibb (page images at HathiTrust; US access only)
• Wells and pumping systems for domestic water supplies (Illinois State Water Survey, 1973), by James P. Gibb (page images at HathiTrust; US access only)
• Standards. (New York, 1948), by Ohio) Hydraulic Institute (Cleveland (page images at HathiTrust; US access only)
• A descriptive and historical account of hydraulic and other machines : or raising water, ancient and modern : with observations on various subjects connected with the mechanic arts : including the progressive development of the steam engine : in five books (Tribune Association :, 1870), by Thomas Ewbank (page images at HathiTrust)
• Investigations on vertical shaft : pumping equipment at the Pump Testing Laboratory, Berkeley, California (The Laboratory, 1940), by Morrough Parker O'Brien and Richard G. Folsom (page images at HathiTrust; US access only)
• Some performance characteristics of deepwell turbine pumps (University of California, Dept. of Mechanical Engineering, Pump Testing Laboratory, 1940), by Richard Gilman Folsom, Berkeley. Pump Testing Laboratory University of California, and Berkeley. Department of Mechanical Engineering University of California (page images at HathiTrust; US access only)
• Selecting large pumping units (U. S. Dept. of the Interior, Bureau of Reclamation ;, 1978), by William Duncan and Carlos G. Bates (page images at HathiTrust)
• Report on trailer pumpers and specifications for auxiliary pumpers (Tentative). Report of the Committee on Municipal Fire Apparatus, presented at the 1941 annual meeting of the National Fire Protection Association ... (National Fire Protection Assoc. (Internat.), 1941), by National Fire Protection Association (page images at HathiTrust; US access only)
• Report of current standards for condensers and condensing system pumps for air-cooled steam power plants (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1973., 1973), by R.W. Beck and Associates and U.S. Atomic Energy Commission. Division of Reactor Research and Development (page images at HathiTrust)
• The mutual interference of rows of blades of axial flow pumps, fans and turbines (1938), by Finn Jonassen (page images at HathiTrust; US access only)
• Waterworks for Texas farm homes (Extension Service, Agricultural and Mechanical College of Texas, 1926), by M. R. Bentley, United States Department of Agriculture, and Agricultural and Mechanical College of Texas. Extension Service (page images at HathiTrust)
• Waterworks for Texas farm homes (College Station, Texas : Extension Service, 1937., 1937), by M. R. Bentley, United States Department of Agriculture, and Agricultural and Mechanical College of Texas. Extension Service (page images at HathiTrust; US access only)
• Waterworks for Texas farm homes (College Station, Texas : Extension Service, Agricultural and Mechanical College of Texas and the United State Dept. of Agriculture, 1940., 1940), by M. R. Bentley, United States Department of Agriculture, and Agricultural and Mechanical College of Texas. Extension Service (page images at HathiTrust; US access only)
• Ground water development for pump irrigation (College Station, Texas : Agricultural Extension Service, Texas A. & M. College System, [1953], 1953), by Robert V. Thurmond, Texas Agricultural and Mechanical College System. Agricultural Extension Service, and United States Department of Agriculture (page images at HathiTrust; US access only)
• Sprinkler irrigation (College Station, Texas : Texas Agricultural Extension Service, [1955], 1955), by Robert V. Thurmond, Texas Agricultural Extension Service, and United States Department of Agriculture (page images at HathiTrust; US access only)
• Mechanical liquid metal pumps in the Alplaus (Genie) heat transfer system (Schenectady, New York : Knolls Atomic Power Laboratory, 1952., 1952), by P. M. Clark, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Theory of back diffusion in seals (Schenectady, New York : Knolls Atomic Power Laboratory, 1949., 1949), by Harvey Brooks, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The US Army Quartermaster School apprenticeship program for the trade of pumper-gauger (petro-chemical). ([Dept. of Defense], Dept. of the Army, Headquarters, 1978), by United States. Department of the Army (page images at HathiTrust)
• Material specifications for pumping equipment. (New York], 1949), by Ohio) Hydraulic Institute (Cleveland (page images at HathiTrust; US access only)
• Test of high duty pumping plant under ordinary working conditions : a paper presented at the Springfield meeting of the Illinois Society of Engineers and Surveyors, January 27, 28, 29, 1897. ([Illinois, 1897), by Dabney Herndon Maury (page images at HathiTrust)
• Development of pump characteristics from field tests (Water Conveyance Branch, Division of Design, Engineering and Research Center, U.S. Dept. of the Interior, Bureau of Reclamation ;, 1979), by Richard J. Brown, David C. Rogers, and Engineering and Research Center (U.S.). Division of Design. Water Conveyance Branch (page images at HathiTrust)
• The use of windmills in irrigation in the semiarid west (U.S. Dept. of Agriculture, 1917), by P. E. Fuller (page images at HathiTrust)
• Farm irrigation pumping plants (Agricultural Experiment Station of the New Mexico College of Agriculture and Mechanic Arts, 1936), by Albert Samuel Curry (page images at HathiTrust; US access only)
• Pumping problems: arithmetical and graphical computations (Davis, Calif.: [s.n.], 1951), by J. B. Brown, L. J. Booher, and University of California Agricultural Extension Service (page images at HathiTrust; US access only)
• Testing water wells for drawdown and yield (Edward E. Johnson, 1944), by Inc Edward E. Johnson (page images at HathiTrust; US access only)
• Standards of the Hydraulic society, recommended by the Hydraulic society. ([New York], 1925), by Ohio) Hydraulic Institute (Cleveland (page images at HathiTrust)
• The solar powered irrigation pump (Dept. of Energy, 1980), by United States. Department of Energy (page images at HathiTrust)
• Water wells and pumps : their design, construction, operation, and maintenance (Division of Agricultural Sciences, University of California, 1978., 1978), by Verne H. Scott and Joseph C. Scalmanini (page images at HathiTrust)
• Die Wasserturbinen und Turbinenpumpen (K. Wittwer, 1921), by Robert Thomann (page images at HathiTrust; US access only)
• Pumpen Druckwasser- und Druckluft- anlagen; ein kurzer Überblick. (Göschen, 1911), by Rudolf Vogdt (page images at HathiTrust; US access only)
• Wasserhaltung in Bergwerken. Beschreibung und Darstellung der fur die Wasserhebungin Bergwerken gebrauchlichen Maschinen, pumpen und anderen Einrichtungen. Ein Handbuch für Bergwerks-techniker, Bergfach-studierende und Maschinenbauer, Mit 487 Abbildungen im Texte und 16 Tafeln mit Ansichten von Wasserhaltungen. (A. Felix, 1903), by Aug. Brunne (page images at HathiTrust; US access only)
• Test of a vertical triple expansion high duty pumping engine in operation at the water works, San Antonio, Texas (The University of Texas, 1905), by Arthur Curtis Scott (page images at HathiTrust; US access only)
• On the theory of steam-jet vacuum pumps ([U.S. Atomic Energy Commission], 1955), by I. M. Lifshit͡s, L. N. Rozent͡sveĭg, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Data summaries of licensee event reports of pumps at U.S. commercial nuclear power plants : January 1, 1972 to April 30, 1978 (Washington, D.C. : Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1980., 1980), by W. H. Sullivan, J. P. Poloski, EG & G Idaho, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Probabilistic Analysis Staff, United States Government Printing Office, and United States. National Technical Information Service (page images at HathiTrust)
• Supplement to the series of letters patent and specifications of letters patent for inventions recorded in the Great seal Patent office, and granted between the 1st March (14 Jac. I.) A. D. 1617, and the 1st October (16 Vict.) A. D. 1852; consisting for the most part of reprints of scarce pamphlets, descriptive of the early patented inventions comprised in that series. (Printed by G. E. Eyre and W. Spottiswoode, printers to the Queens's Most Excellent Majesty, 1858), by Great Britain. Patent Office, William Watson, Richard Mead, Alexandre Tolhausen, Samuel Sutton, Jonathan Hulls, John Allen, Thomas Savery, Edward Somerset Worcester, William Wheler, J. B. W., Dud Dudley, Nicholas Halse, Nicholas Page, Richard Wynne, John Rovenzon, Simon Sturtevant, and Bennet Woodcroft (page images at HathiTrust)
• Model study of the inlet and sump of the Clinton First Avenue Pump Station (University of Iowa, Iowa Institute of Hydraulic Research, 1976), by Cesar Farell and United States. Army. Corps of Engineers. Rock Island District (page images at HathiTrust; US access only)
• Time, distance and drawdown relationships in a pumped ground-water basin (U.S. Dept. of the Interior, Geological Survey, 1960), by Fred Kunkel and Geological Survey (U.S.) (page images at HathiTrust)
• Common cause fault rates for pumps : estimates based on licensee event reports at U.S. commercial nuclear power plants, January 1, 1972 through September 30, 1980 (Washington, D. C. : U.S. Nuclear Regulatory Commission, 1983., 1983), by Corwin L. Atwood, EG & G Idaho, and U.S. Nuclear Regulatory Commission. Division of Risk Analysis (page images at HathiTrust)
• Discharge measurement using radioisotopes in high head turbines and pumps (Washington, D. C. : U.S. Atomic Energy Commission, 1966., 1966), by R. L. Hansen, J. C. Schuster, U.S. Atomic Energy Commission, U.S. Atomic Energy Commission. Division of Isotopes Development, and U.S. Atomic Energy Commission. Division of Technical Information (page images at HathiTrust)
• Fission product behavior loop facility description ([Canoga Park, California] : Atomics International, A Division of North American Rockwell Corporation, 1969., 1969), by J. Guon, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• Sodium chemistry loop facility description ([Canoga Park, California]. : Atomics International, A Division of North American Rockwell Corporation, 1969., 1969), by J. Guon, H. A. Vislay, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• SRE standard operating procedures (Canoga Park, California : Atomics International, A Division of North American Aviation, Inc., 1960., 1960), by R. E. Durand, L. E. Vorderbrueggen, E. N. Pearson, L. L. Johnson, O. G. Jenkins, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• Operating experience with the sodium reactor experiment and its application to the Hallam nuclear power facility (Oak Ridge, Tennessee : USAEC Division of Technical Information Extension, 1961., 1961), by R. J. Beeley, J. E. Mahlmeister, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• Heat transfer application of liquid lithium, liquid metals and liquid metal pumps (Livermore, California : University of California, Radiation Laboratory, 1956., 1956), by Frederick E. Frost, Glen Maynard, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Millwright and engineer's pocket companion, comprising decimal arithmetic, tables of square and cube root ... : mechanic powers ... (Columbia University Libraries, 1856), by William Templeton and Samuel Maynard (page images at HathiTrust)
• Standards. (New York, 1955), by Hydraulic Institute (U.S.) (page images at HathiTrust)
• Field Force Pump Co.'s latest improved outfits (Field Force Pump Co., 1888), by Field Force Pump Co (page images at HathiTrust)
• Water supplies for suburban and country homes. Dug well supplies. (Richmond, 1951), by Virginia. Dept. of Health (page images at HathiTrust; US access only)
• Catalogue and price list of iron and brass pumps (The Company, 1889), by Silver & Deming Manufacturing Company (page images at HathiTrust)
• Cameron hydraulic data. (Ingersoll-Rand, in the 20th century), by Ingersoll-Rand Company (page images at HathiTrust)
• Proposal, contract, specifications and bond for north side sewage treatment works, Division P : pump and blower house at Niles Center, Illinois (Webb-Linn Print. Co., 1925), by Chicago Sanitary District. Board of Trustees (page images at HathiTrust)
• Mast, Foos & Co. : manufacturers of Buckeye force pumps, iron turbine wind engines, Buckeye iron fence, Buckeye senior & junior lawn mowers, etc. (Mast, Foos & Co., 1888), by Foos & Co Mast (page images at HathiTrust)
• Farm pumps (U.S. Dept. of Commerce, Bureau of the Census, 1959), by United States Bureau of the Census (page images at HathiTrust)
• Wheeler-economy pumps. (Philadelphia : C. H. Wheeler Maufacturing, 1957., 1957), by Wheeler (C.H.) Manufacturing Co. Economy Pump Division (page images at HathiTrust; US access only)
• Pumps, valves and compressors. (U.S. Dept. of Commerce, International Trade Administration, 1986), by United States. International Trade Administration (page images at HathiTrust)
• Pumps and Hydraulics, Part 2 (of 2), by N. Hawkins (Gutenberg ebook)
• Pumps and Hydraulics, Part 1 (of 2), by N. Hawkins (Gutenberg ebook)

More items available under broader and related terms at left.