The Online Books Page

Vacuum technology

See also what's at your library, or elsewhere.

• Vacuum

• Ultrahigh vacuum

• Dewar flasks
• Leak detectors
• Thermos bottles
• Vacuum arcs
• Vacuum brazing
• Vacuum concrete process
• Vacuum metallurgy
• Vacuum pumps
• Vacuum-gages
• Vacuum-tubes
• Vapor-plating

• Industrial vacuum
• Vacuum -- Industrial applications
• Vacuum in industry

• Vacuum treatments of cheese / ([Madison, Wis.] : Experiment Station, College of Agriculture, University of Wisconsin, 1965), by Walter V. Price, A. Grimstad, Norman F. Olson, and University of Wisconsin. College of Agriculture (page images at HathiTrust; US access only)
• Effect of fiber on the dewatering of paper mill sludges by vacuum filtration. (New York : National Council of the Paper Industry for Air and Stream Improvement, Inc., [1963]), by National Council of the Paper Industry for Air and Stream Improvement (U.S.) (page images at HathiTrust)
• Bearing endurance tests in vacuum for sputtered molybdenum disulfide films / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Talivaldis Spalvins and Lewis Research Center (page images at HathiTrust)
• Characteristics and performance of several mass spectrometer residual gas analyzers / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by William W. Hultzman and Lewis Research Center (page images at HathiTrust)
• Terra Vac in situ vacuum extraction system : applications analysis report. (Cincinnati, Ohio : U.S. Environmental Protection Agency, 1989), by United States. Environmental Protection Agency. Office of Research and Development and Risk Reduction Engineering Laboratory (U.S.) (page images at HathiTrust)
• Phenomena associated with bench and thermal-vacuum testing of superconductors--heat pipes / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by James P. Marshburn and Goddard Space Flight Center (page images at HathiTrust)
• Time-dependent polar distribution of outgassing from a spacecraft / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by John J. Scialdone and Goddard Space Flight Center (page images at HathiTrust)
• In-flight and laboratory vacuum-friction test results / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by E. J. Devine, William A. Leasure, Harold E. Evans, and Goddard Space Flight Center (page images at HathiTrust)
• Analyses of flight model spacecraft performance during thermal-vacuum tests / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Albert R. Timmins, James C. Strain, and Robert E. Heuser (page images at HathiTrust)
• Gas flow analysis during thermal vacuum test of a spacecraft / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by John J. Scialdone and Goddard Space Flight Center (page images at HathiTrust)
• Measurement of the lowest pressures in space and the laboratory / ([Washington] : National Aeronautics and Space Administration , [1965]), by Wallace Kreisman, GCA Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Review of vacuum technology for controlled thermonuclear research : summary report / ([Washington] : U.S. Energy Research and Development Administration, Division of Controlled Thermonuclear Research ; Springfield, Va. : for sale by the National Technical Information Service, 1976), by Hatice S Cullingford and United States. Energy Research and Development Administration (page images at HathiTrust)
• Investigation of the effect of vacuum on the economy of a 5000 k.w. turbine / (1907), by Ernst Otto Jacob (page images at HathiTrust; US access only)
• Certain characteristics of the ionization method of obtaining a very high vacuum / ([Oak Ridge, Tenn.] : [U.S. Atomic Energy Commission], [1955?]), by N. D. Morgulis (page images at HathiTrust)
• Design and installation of a high precision temperature and intimate contact monitor for experimental vacuum chucks / (Richland, Wash. : U.S. Atomic Energy Commission, 1958), by G. W. Morrow, U.S. Atomic Energy Commission, Hanford Works, and Hanford Atomic Products Operation (page images at HathiTrust)
• SITE program demonstration test : Terra Vac in situ vacuum extraction system, Groveland, Massachusetts. (Cincinnati, OH : Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, [1989-), by Peter A. Michaels, Inc Foster Wheeler Enviresponse, and Risk Reduction Engineering Laboratory (U.S.) (page images at HathiTrust)
• CAS, CERN Accelerator School : vacuum technology : Scanticon Conference Centre, Snekersten [sic], Denmark, 28 May-3 June 1999 : proceedings / (Geneva : CERN, 1999), by Denmark) CERN Accelerator School (1999 : Snekkersten, S. Turner, and European Organization for Nuclear Research (page images at HathiTrust)
• CAS CERN Accelerator School, vacuum in accelerators : Platja D'Aro, Spain, 16-24 May 2006 : proceedings / (Geneva : CERN, 2007), by Spain) CERN Accelerator School (2006 : Platja D'Aro, Daniel A. Brandt, and European Organization for Nuclear Research (page images at HathiTrust)
• Friction and wear characteristics of polyimide and filled polyimide compositions in vacuum (10¹̄⁰ mm Hg) / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1966), by Donald H. Buckley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Effects of a simulated Martian mission on the mechanical properties of Dacron parachute material / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by David C. Spence, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Physical sciences : thermodynamics, cryogenics, and vacuum technology : a compilation. ([Washington] : Technology Utilization, National Aeronautics and Space Administration ; Springfield, Va. : for sale by the National Technical Information Service, 1974), by United States. National Aeronautics and Space Administration. Office of Technology Utilization (page images at HathiTrust)
• Vacuum technology and space simulation (Washington, Scientific and Technical Information Division, National Aeronautics and Space Administration; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1966), by Donald J. Santeler and Troy Aero Vac Corporation (page images at HathiTrust)
• Effect of vacuum processing on outgasing within an orbiting molecular shield / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by R. A. Outlaw, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Compressed air & vacuum systems. (Alexandria, Va. : Dept. of the Navy, Naval Facilities Engineering Command, [1983]), by United States. Naval Facilities Engineering Command (page images at HathiTrust)
• Better vacuum by removal of diffusion-pump-oil contaminants / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Alvin E. Buggele and Lewis Research Center (page images at HathiTrust)
• High-Vacuum Technology, Testing, and Measurement Meeting : June 8-9, 1965 : compilation of papers / ([Washington, DC] : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Testing High-Vacuum Technology and Lewis Research Center (page images at HathiTrust)
• Uniform vacuum ultraviolet reflecting coatings on large surfaces / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by H. Herzig and Goddard Space Flight Center (page images at HathiTrust)
• A small volume, ultrahigh vacuum system for ionization gage studies / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by R. A. Outlaw, James M. Bradford, and Langley Research Center (page images at HathiTrust)
• Rolling element slip rings for vacuum application / (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1964]), by Edward J. Devine and Goddard Space Flight Center (page images at HathiTrust)
• Instrument bearing performance in space and laboratory vacuum, (Washington, National Aeronautics and Space Administration; [for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va.], 1970), by E. J. Devine, William A. Leasure, and Harold E. Evans (page images at HathiTrust; US access only)
• Physical adsorption of nitrogen gas on the polished surface of 347 stainless steel at very low pressures / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by R. A. Outlaw, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Extreme vacuum technology (below 10⁻¹³ Torr) and associated clean surface studies / (Washington, D.C. : National Aeronautics and Space Administration, 1964), by Paul J. Bryant, Lyle H. Taylor, and Charles M. Gosselin (page images at HathiTrust; US access only)
• An evaluation of boron-polymer film layer composites for high-performance structures / (Washington, D.C. : National Aeronautics and Space Administration, 1968), by R. F. Crawford (page images at HathiTrust; US access only)
• Handbook of high vacuum engineering. (New York, Reinhold Pub. Corp., [1963]), by H. A. Steinherz (page images at HathiTrust)
• Glossary of terms used in vacuum technology. ([New York, Pergamon Press, 1958]), by American Vacuum Society. Committee on Standards (page images at HathiTrust)
• High vacuum engineering. Under the editorship of Irving L. Kosow. (Englewood Cliffs, N. J., Prentice-Hall, [1963]), by Alfred E. Barrington (page images at HathiTrust)
• Ultrahigh vacuum and its applications (Englewood Cliffs, N.J., Prentice-Hall, [1963]), by Richard W. Roberts and Thomas A. Vanderslice (page images at HathiTrust)
• High vacuum valve and seal / (Oak Ridge, Tenn. : Technical Information Division, Atomic Energy Commission, [1947]), by L. D. P. King and U.S. Atomic Energy Commission (page images at HathiTrust)
• Adsorption of hydrogen on solidified-gas films / (Livermore, Ca. : Lawrence Radiation Laboratory, 1961), by Angus L. Hunt, John E. Omohundro, Clyde E. Taylor, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Gettering of residual gases and the adsorption rate of hydrogen on evaporated molybdenum films at liquid nitrogen temperatures / (Livermore, Ca. : Lawrence Radiation Laboratory, 1961), by Angus L. Hunt and Lawrence Radiation Laboratory (page images at HathiTrust)
• Vacuum leak testing of radioactive source capsules / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1965), by C. R. King and U.S. Atomic Energy Commission (page images at HathiTrust)
• The use of indium in high-vacuum equipment / (Berkeley, Ca. : Lawrence Radiation Laboratory, 1955), by F. L. Reynolds, U.S. Atomic Energy Commission. TID., and Lawrence Radiation Laboratory (page images at HathiTrust)
• Utilizing plastic impregnation in equipment for nuclear research / (Berkeley, Calif. : University of California Radiation Laboratory, 1955), by William W. Jr Salsig and Lawrence Radiation Laboratory (page images at HathiTrust)
• High-vacuum techniques / ([Albuquerque, N.M.] : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, [1960]), by Gary L. Krieger and Sandia Corporation (page images at HathiTrust; US access only)
• Fast response, low inertia vacuum furnace / (Canoga Park, California : Atomics International, [1960]), by L. H. Rachal, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A metal high-vacuum manifold / (Miamisburg, OH : Mound Laboratory, 1953), by E. Paige, Mound Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vacuum equipment and techniques., by W. E. Bush and U.S. Atomic Energy Commission. Technical Information Service Extension (page images at HathiTrust)
• Vacuum sparking., by Orlo Edmund Myers, William Arthur Raatz, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A small high temperature vacuum furnace for laboratory use /, by C. A. Smith, U.S. Atomic Energy Commission, and North American Aviation (page images at HathiTrust)
• Cladding of metals to iron by vacuum rolling / ([Washington, D.C.] : United States Dept. of the Interior, Bureau of Mines, 1980), by Robert Blickensderfer (page images at HathiTrust)
• Attainment of 10⁻⁹ mm Hg pressure in unbaked vacuum systems by molybdenum evaporation / (Berkeley, Ca. : Lawrence Radiation Laboratory, 1960), by Angus L. Hunt, Earl C. Popp, Charles C. Damm, and Lawrence Radiation Laboratory (page images at HathiTrust)
• A liquid-helium-cooled trap for pumping gas by adsorption / (Livermore, Ca. : Lawrence Radiation Laboratory, 1960), by J. R. Ullman, E. J. Lauer, W. C. Jordan, G. Gibson, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Electron beam vacuum welding : development of process / (Richland, Wash. : U.S. Atomic Energy Commission, 1958), by W. L. Wyman, W. I. Steinkamp, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• New developments in vacuum engineering / (Oak Ridge, Tenn. : Manhattan District, 1946), by R. B. Jacobs, H. F. Zuhr, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Turner vacuum valve / (Oak Ridge, Tenn. : Manhattan District, 1946), by C. M. Turner and U.S. Atomic Energy Commission (page images at HathiTrust)
• Determination of oxygen by the vacuum fusion method / (Oak Ridge, Tenn. : Atomic Energy Commission, 1946), by C. N. Rice and U.S. Atomic Energy Commission (page images at HathiTrust)
• A high temperature-high vacuum apparatus / (Oak Ridge, Tenn. : Atomic Energy Commission, 1946), by Norman L. Lofgren, Paul W. Gilles, LeRoy A. Bromley, Leo Brewer, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Leak detector : cat. no. 6933950G3 / (Oak Ridge, Tenn. : Atomic Energy Commission, 1946), by General Electric Company. Apparatus Department and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vacuum melting and casting of beryllium / (Oak Ridge, Tenn. : Atomic Energy Commission, 1947), by E. Gordon, U.S. Atomic Energy Commission, and Massachusetts Institute of Technology (page images at HathiTrust)
• Sorption of gases by vapor-deposited titanium films / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by Robert E. Clausing, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• High vacuum flange test of a bakeable aluminum wire seal / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by J. D. Redman, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• Small electric motors for use in high-vacuum systems using oil-diffusion pumps / (Livermore, Calif. : University of California Radiation Laboratory, 1955), by Alfred R. Taylor and Lawrence Radiation Laboratory (page images at HathiTrust; US access only)
• Vacuum deposition of thin films / (New York : Wiley, 1958, c1956), by L. Holland (page images at HathiTrust)
• A new vacuum lock for continuously evacuated systems / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1949), by D. Saxon, J. Richards, Argonne National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vacuum gauges. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1948), by Kenneth Simpson and U.S. Atomic Energy Commission (page images at HathiTrust)
• Miscellaneous vacuum materials and equipment. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1948), by William E. Bush and U.S. Atomic Energy Commission (page images at HathiTrust)
• Leak testing encapsulated radioactive sources / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1972), by R. G. Niemeyer, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Formative time delay of high-vacuum sparks / (Berkeley, Ca. : University of California Radiation Laboratory, 1953), by Harry G. Heard, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Tank outgassing / (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Extension ;, 1945), by F. T. Howard, Tennessee Eastman Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Preliminary design development of a vacuum chamber for the Argonne ZGS / (Stoughton, Wis. : Midwestern Universities Research Association, [1965]), by G. M. Lee, W. R Winter, J. E O'Meara, U.S. Atomic Energy Commission, and Midwestern Universities Research Association (page images at HathiTrust)
• Alpha phase vacuum outgassing of dingot uranium : topical report / (Weldon Spring, Missouri : Mallinckrodt Chemical Works, Uranium Division, 1961), by J. A. Fellows, Mo.). Uranium Division Mallinckrodt Chemical Works (Weldon Spring, U.S. Atomic Energy Commission, and Mo.) Mallinckrodt Chemical Works (Saint Louis (page images at HathiTrust)
• A remote controlled quartz-fiber microbalance design, construction, and characteristics : (information report) /, by R. G. Olt, J. H. Wright, S. R. Orr, M. I. Gray, H. R. DuFour, U.S. Atomic Energy Commission, Mound Laboratory, and Monsanto Chemical Company (page images at HathiTrust)
• Removable bowl cold trap /, by E. C. Evans, E. F. Babelay, Carbide and Carbon Chemicals Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Production of well known pressures of pure and mixed gases in the high-vacuum range /, by G. Schneppe and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Calculating high vacuum systems, (Washington, D. C., Hobart publishing company, [1947?]), by W. P. Dryer and U.S. Atomic Energy Commission (page images at HathiTrust; US access only)
• Molten phosphate reactor fuels. (Canoga Park, California : Atomics International, [1962]), by W. S. Ginell, T. L. Young, L. F. Grantham, M. A. Hiller, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Development of an instrument and technique utilizing carbon-14 for measuring very low concentrations of oxygen in high purity metals : final report /, by Roger A. Covert, U.S. Atomic Energy Commission. New York Operations Office, Alloyd Corporation, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
• Impurities in a vacuum /, by Jerome H. Bloom, Robert L. Phipps, Charlotte E. Ludington, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• An attempt to reduce the gas load in an ultrahigh-vacuum chamber /, by Joel E. M. Adler and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Vacuum hot-pressing apparatus and techniques / (Hanscom AFB, Mass. : Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1975), by Joseph A. Adamski, Normantas Klausutis, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Cryopumping by three arrays at pressures of 10( -3) to 10( -8) mm Hg /, by Carlisle B. Barnes, Charles B. Jr Hood, sponsor Stevens Company, sponsor Wright-Patterson Air Force Base (Ohio), and sponsor United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Ultrahigh vacuum techniques : quarterly progress report, period covered July 1 - September 30, 1961 /, by Westinghouse Research Laboratories and sponsor U.S. Atomic Energy Commission (page images at HathiTrust)
• New developments in vacuum engineering : errata / (Oak Ridge, Tenn. : Manhattan District, 1946), by R. B. Jacobs, H. F. Zuhr, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Determination of oxygen by the vacuum fusion method : errata / (Oak Ridge, Tenn. : Atomic Energy Commission, 1946), by C. N. Rice and U.S. Atomic Energy Commission (page images at HathiTrust)

More items available under narrower terms.