The Online Books Page

Proceedings : Symposium on pulse-combustion applications : Atlanta, Georgia, March 2-3, 1982 (National Technical Information Service, U.S. Dept. of Commerce, 1982), by Ga.) Symposium on Pulse-Combustion Applications (1982 : Atlanta, David W. Locklin, Abbott A. Putnam, Brookhaven National Laboratory, Gas Research Institute, Battelle Memorial Institute. Columbus Laboratories, and United States. National Technical Information Service (page images at HathiTrust)

Filed under: Water heaters -- Energy conservation

Super efficient gas water heating appliance initiative : PIER final project report (California Energy Commission, 2008), by Marshall Hunt, Valley Energy Efficiency Corporation, and California Energy Commission. Public Interest Energy Research (page images at HathiTrust)
Water heating design guide : final project report ([Sacramento, Calif.] : California Energy Commission, [2012], 2012), by Marc Hoeschele, Gas Technology Institute, Davis Energy Group, and California Energy Commission. Energy Research and Development Division (page images at HathiTrust)
Reducing waste in residential hot water distribution systems : national lab buildings energy efficiency research projects : final project report ([Sacramento, Calif.] : California Energy Commission, Energy Research and Development Division, [2014], 2014), by Jim Lutz, California Energy Commission. Energy Research and Development Division, and Lawrence Berkeley National Laboratory (page images at HathiTrust)
Proposed compliance option for: Altherma air-to-water source heat pump for the Residential Energy Efficiency Standards : final evaluation report : staff report (California Energy Commission, 2012), by David W Ware and California Energy Commission. High Performance Buildings and Standards Development Office (page images at HathiTrust)

Filed under: Water heaters -- Energy consumption

Energy efficiency potential of gas-fired commercial water heating equipment in foodservice facilities : final project report ([Sacramento, Calif.] : California Energy Commission, [2010], 2010), by Don Fisher, Amin Delagah, California Energy Commission. Energy Research and Development Division, Inc Fisher-Nickel, and Pacific Gas and Electric Company (page images at HathiTrust)
Residential water heating program : facilitating the market transformation to higher efficiency gas-fired water heating : final project report ([Sacramento, Calif.] : California Energy Commission, [2012], 2012), by Hillary Vadnal, Paul Glanville, Douglas Kosar, Gas Technology Institute, and California Energy Commission. Energy Research and Development Program (page images at HathiTrust)
Advanced foodservice appliances for California restaurants : final project report ([Sacramento, Calif.] : California Energy Commission, [2013], 2013), by Frank Johnson, Gas Technology Institute, and California Energy Commission. Energy Research and Development Division (page images at HathiTrust)

Filed under: Water heaters -- Research

Simulation models for improved water heating systems : national lab buildings energy efficiency research projects : final project report ([Sacramento, Calif.] : California Energy Commission, Energy Research and Development Division, [2013], 2013), by Margarita Kloss, Peter Grant, Jim Lutz, Lawrence Berkeley National Laboratory, and California Energy Commission. Energy Research and Development Division (page images at HathiTrust)

Filed under: Water heaters -- Technological innovations

Simulation models for improved water heating systems : national lab buildings energy efficiency research projects : final project report ([Sacramento, Calif.] : California Energy Commission, Energy Research and Development Division, [2013], 2013), by Margarita Kloss, Peter Grant, Jim Lutz, Lawrence Berkeley National Laboratory, and California Energy Commission. Energy Research and Development Division (page images at HathiTrust)

Filed under: Water heaters -- Testing

Comparative tests of various fuels when burned in a domestic hot-water boiler, 1935-1938 (J. O. Patenaude, I.S.O., printer to the King, 1940), by Canada. Bureau of Mines, Clarence Edwin Baltzer, and Edmund Senkler Malloch (page images at HathiTrust)
Testing and rating convectors (Washington, D.C. : United States Department of Commerce, National Bureau of Standards, 1947., 1947), by United States. National Bureau of Standards (page images at HathiTrust)

Filed under: Water heaters -- United States

Sacramento area solar domestic water heater installers survey report (Office of Commissioner Ronald D. Doctor, California Energy Commission, 1979), by Tricia Hutchcraft and California Energy Commission (page images at HathiTrust)

Filed under: Water heaters -- Law and legislation -- United States

Domestic water heater industry (United States Government Printing Office, 1933), by United States National Recovery Administration (page images at HathiTrust)

Filed under: Electric water heaters

Experiments with electric water heaters for poultry (Purdue University Agricultural Experiment Station, 1932), by Truman Edward Hienton and C. W. Carrick (page images at HathiTrust; US access only)
Electrically heated waterers for livestock (Purdue University, Agricultural Experiment Station, 1944), by G. H. Foster (page images at HathiTrust; US access only)

Filed under: Feed-water heaters

Standards. (New York, 1962), by Feedwater Heater Manufacturers Association (page images at HathiTrust)
Fifty years' history of the development of Green's Economiser, with notes on other economiser inventions and early tubular boilers (G. Falkner, 1895), by William Henry Fowler (page images at HathiTrust)
Elesco locomotive feed water heaters (The Superheater Company, 1929), by New York Superheater Company (page images at HathiTrust)
Green's improved patent fuel economizer for steam boilers ... Sole makers in the United States ([The F. Presbey Co., New York, 1904), by Green Fuel Economizer Co (page images at HathiTrust)
Smoke-box superheater : feed water heater. (Baldwin Locomotive Works, 1909), by Baldwin Locomotive Works (page images at HathiTrust)

Filed under: Water heaters, Gas

A study of the source and character of the gases found in hot water heating systems (1915), by William Calvin Adams (page images at HathiTrust; US access only)
Super efficient gas water heating appliance initiative : PIER final project report (California Energy Commission, 2008), by Marshall Hunt, Valley Energy Efficiency Corporation, and California Energy Commission. Public Interest Energy Research (page images at HathiTrust)

Filed under: Standards

Status report: National Standard Reference Data System, April 1966. (For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Edward L. Brady (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume I (1969) (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume II (1969) (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume III (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. II - cost estimates. Final report. (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. III - appendices. Final report. (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. IV - MVSPS cost estimator's guide. Final report. (1969) (page images at HathiTrust)
The organization and program structure of the National Highway Safety Bureau. (1967), by Robert Brenner and 1st annual meeting Federal Highway Administration (page images at HathiTrust)
Determination of the tradeoffs between safety, weight, and cost of possible improvements to vehicles structure and restraints. Final report. (1974), by G. H. Alexander, R. E. Conrad, and M. R. Neale (page images at HathiTrust)
Analytical methods and design implications of deterministic ride quality criteria. Final report. (1975), by J. K. Hedrick, R. C. White, and H. Firouztash (page images at HathiTrust)
Model police traffic services procedures (1975) (page images at HathiTrust)
Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
Evaluation of benefits to the federal highway program provided by regulation of vehicle noise emissions. (1976), by N. P. Miller, P. C. Fano, T. J. Rosalanko, and H. B. Darcy (page images at HathiTrust)
A manual of police traffic services, rules (1976) (page images at HathiTrust)
The contributions of automotive regulation. Preliminary report. (1978) (page images at HathiTrust)
Automobile fuel economy contractors' coordination meeting - summary report. (1978), by Contractors' Coordination Meeting Automotive Fuel Economy Research and Analysis Program (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Volume II: appendices. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
Vehicle anti-theft security system design. Volume II: technical report. Final report. (1978), by John S. Howland (page images at HathiTrust)
Vehicle anti-theft security system design. Volume I: summary report. Final report. (1978), by John S. Howland (page images at HathiTrust)
Final assessment of the bumper standard. (1979) (page images at HathiTrust)
Final assessment of the bumper standard. Executive summary. (1979) (page images at HathiTrust)
Development of standards and tests for acceptance of traffic signal lenses. Final report. (1979), by David F. King (page images at HathiTrust)
An evaluation of standard 214. Technical report. (1979), by Charles Jesse Kahane (page images at HathiTrust)
Evaluation plan for Federal Motor Vehicle Safety Standard 208 occupant crash protection. (1979) (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Task VI additional bumpers, FMVSS 215 - exterior protection. Final report. (1978), by M. R. Harvey, C. B. Eckel, and David Cowan (page images at HathiTrust)
Study of the effects of applying federal motor vehicle safety standard 201 to light trucks and vans. Modification No. 2. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
Study of the effects of applying federal motor vehicle safety standards 203 & 204 to light trucks and vans. Modification No. 3. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
Passenger car/pedestrian impact protection system evaluation. Final report. (1979), by R. McLean, L. A. C. Barbarek, and O. J. Viergutz (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards: Task VIII - FMVSS 301, fuel system integrity - determination of the model year when manufacturers made changes to meet Standard's 1976 requirements. Final report. (1979), by R. F. McLean and G. Lisiecki (page images at HathiTrust)
Calculations and supporting material for the preliminary analysis of the bumper standard. (1979) (page images at HathiTrust)
Comments of Houdaille industries on the bumper standard. (1979) (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards - Vol. V. - FMVSS 213. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume I: FMVSS 105. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume II: FMVSS 108. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume III: FMVSS 122. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume IV: FMVSS 202 and 207. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume VI: FMVSS 220, 221 and 222. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards - Task IX: FMVSS 214, side door strength, identification and cost evaluation of design and manufacturing changes. Final report. (1979), by M. R. Harvey and C. B. Eckel (page images at HathiTrust)
Review of procedures for determining corporate average fuel economy - Volume I: executive summary. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
Review of procedures for determining corporate average fuel economy - Volume II: technical report. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
Cost and economic impact of tire reserve load requirements. Final report. (1980), by O. J. Viergutz, S. Marek, C. Kelley, and H. Wakeley (page images at HathiTrust)
Cost evaluation for three Federal Motor Vehicle Safety Standards - FMVSS 203, 204, and 212. Final report. (1980), by R. F. McLean, C. B. Eckel, and J. A. Lesczhik (page images at HathiTrust)
Side impact conference. (Government Printing Office, Washington, D.C., 1980), by 31 Jan 1980-1 Feb 1980 Side Impact Conference (page images at HathiTrust)
An evaluation of Federal Motor Vehicle Safety Standards for passenger car steering assemblies. Standard 203 - impact protection for the driver. Standard 204 - rearward column displacement. (1981), by Charles Jesse Kahane (page images at HathiTrust)
Emergency medical services communications design manual. Final report. (1980), by C. Davis, Sandra Callahan, and F. Pethel (page images at HathiTrust)
Implementation analysis for daytime headlamp use. Final report. (1980), by D. M. Teague, L. E. Rohter, Leonard P. Gau, H. G. Wakeley, and O. J. Viergutz (page images at HathiTrust)
FMVSS no. 208 extension to light trucks, vans, and MPV's - cost/leadtime study. Final report. (1981), by R. Schwarz (page images at HathiTrust)
Multipiece rims for trucks, buses, and trailers - economic effects caused by further regulation of rims in Standard No. 120. Final report. (1981), by R. W. Gaines (page images at HathiTrust)
Review and evaluation of automotive fuel conservation technologies. Final summary report. (1981), by S. Marek, L. Rohter, and O. J. Viergutz (page images at HathiTrust)
Model police traffic services directives (policy, procedures, rules) for police executives. Final report. (1981), by R. H. Sosktowski, W. J. Nash, and R. C. Mayer (page images at HathiTrust)
Final regulatory analysis of the model year 1982 light truck fuel economy standards. (1980) (page images at HathiTrust)
An evaluation of head restraints - Federal Motor Vehicle Safety Standard 202. (1982), by Charles Jesse Kahane (page images at HathiTrust)
Review and evaluation of automotive fuel conservation technologies. Final report. (1981), by H. M. Siegel, R. Schwarz, J. Andon, G. Kollars, T. Gerstenberger, R. Gaines, Ronald Falk, and Stan Renick (page images at HathiTrust)
Comprehensibility standards for technical manuals. (1978) (page images at HathiTrust)
Cost evaluation for two Federal Motor Vehicle Safety Standards; FMVSS 113 Hood Latch - Passenger Cars; FMVSS 219 Windshield Zone Intrusion - Passenger Cars. Final report. (1982), by T. N. McVetty, A. J. Cross, and L. W. Parr (page images at HathiTrust)
Evaluation of Federal Motor Vehicle Safety Standard 301-75, Fuel System Integrity: Passenger Cars. (1983), by G. G. Parsons (page images at HathiTrust)
An evaluation of side structure improvements in response to Federal Motor Vehicle Safety Standard 214. (1982), by Charles Jesse Kahane (page images at HathiTrust)
A preliminary evaluation of two braking improvements for passenger cars - dual master cylinders and front disc brakes. (1983), by Charles Jesse Kahane (page images at HathiTrust)
Consumer cost evaluation of Federal Motor Vehicle Safety Standards - FMVSS 103 and 104. Final report. (1982), by John L. Gilmour (page images at HathiTrust)
An evaluation of side marker lamps for cars, trucks and buses. (1983), by Charles Jesse Kahane (page images at HathiTrust)
Feasibility of shipbuilding standards. Executive summary. (1976), by Kevin P. Gildart and James A. Burbank (page images at HathiTrust; US access only)
Report of Castine Conference: feasibility of shipbuilding standards (1976), by 7-9 June 1976 Feasibility of Shipbuilding Standards Conference (page images at HathiTrust; US access only)
Final report on a compendium of shipbuilding standards (U.S. Department of Commerce Maritime Administration, 1979), by Corporate-Tech Planning, Bath Iron Works, United States Maritime Administration, and National Shipbuilding Research Program. Task S-20 (page images at HathiTrust)
Propulsion plant standards feasibility study. Executive summary. (1975) (page images at HathiTrust; US access only)
Propulsion plant standards feasibility study. Final report. (1975) (page images at HathiTrust; US access only)
Recommended U.S. shipbuilding standards program long-range plan : final report. (National Shipbuilding Research Program, 1982), by Ishikawajima Jūkōgyō Kabushiki Kaisha, Inc IHI Marine Technology, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
Consensus QA/QC acceptance standards, Task S-31 of the Ship Producibility Research Program. (1982) (page images at HathiTrust; US access only)
Standard structural arrangements - a report of research conducted under MARAD Task S-11 of the Ship Producibility Research Program to determine the value of standard structural arrangements. (1978) (page images at HathiTrust; US access only)
Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume I. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume II. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
Scheduling standards pilot project. Summary report. (1982) (page images at HathiTrust; US access only)
A manual on planning and production control for shipyard use. (1978) (page images at HathiTrust; US access only)
Industrial engineering applications in the U.S. shipbuilding industry : May 25, 1982, New Orleans, Louisiana ([Bath Iron Works Corporation?], 1982), by Bath Iron Works, 25 May 1982 Industrial Engineering Application in the U.S. Shipbuilding Industry Symposium, and 25 May 1982 American Institute of Industrial Engineers' Industrial Engineering Conference (page images at HathiTrust; US access only)
Shipbuilding industry/production engineering workshop. Proceedings. (1978), by 21-24 Feb 1978 Shipbuilding Industrial/Production Engineering Workshop (page images at HathiTrust; US access only)
Improved planning and production control. (1977) (page images at HathiTrust; US access only)
Shipyard marking methods. (1980) (page images at HathiTrust; US access only)
Prefailure evaluation techniques for marine coatings. (1974) (page images at HathiTrust; US access only)
Surface preparation: a comparative analysis of existing standards - a proposed marine standard. (1983), by L. Jackel (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Executive summary. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Volume 1: report. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Volume 2: appendices. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Quality assurance system. Executive summary. Final report. (1980) (page images at HathiTrust; US access only)
Japanese technology that could improve U.S. shipbuilding productivity. (1980) (page images at HathiTrust; US access only)
Mineral slag abrasive survey and specification. (1984) (page images at HathiTrust; US access only)
Draft U.S. merchant ship bridge design standards - report II. Final report. (1982), by K. L. Marino and R. B. Cooper (page images at HathiTrust; US access only)
Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
Shipbuilding design/production integration workshop. Volume I. Proceedings. (1981), by 18-21 Jan 1981 Shipbuilding Design/Production Integration Workshop (page images at HathiTrust; US access only)
Determination of volume solids of paints and coatings by accurate dry film thickness measurements. (1981) (page images at HathiTrust; US access only)
Work management manual - main assembly. Volume I. (1982) (page images at HathiTrust; US access only)
Work management manual - main assembly. Volume II. (1982) (page images at HathiTrust; US access only)
Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
Work management manual - electrical installation. Volume II. (1982) (page images at HathiTrust; US access only)
Work management manual - in-shop blast and paint. (1983) (page images at HathiTrust; US access only)
Work management manual - material handling for shipyards. (1983) (page images at HathiTrust; US access only)
Work management manual - hull erection. (1981), by D. Koelling, W. Inman, D. Phillips, and J. Schauske (page images at HathiTrust; US access only)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume I: executive summary. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume III: 1982 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume II: 1982 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume IV: 1983 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume V: 1983 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VI: 1984 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VII: 1984 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
A compendium of shipbuilding standards. Interim report on subtask I: regulatory body and classification body shipbuilding standards. (1979) (page images at HathiTrust; US access only)
A compendium of shipbuilding standards. Interim report on subtask II: industrial standards in shipbuilding use. (1979) (page images at HathiTrust; US access only)
A compendium of shipbuilding standards. Interim report on subtask III: foreign shipbuilding standards. (1979) (page images at HathiTrust; US access only)
FY-82 Labor Standards Program - pipe fabricating and blast and paint shops. (1983) (page images at HathiTrust; US access only)
Work management manual - pipe fabricating shop. (1981), by D. Fulwiler, D. Kressig, and J. Tong (page images at HathiTrust; US access only)
Back-up data for temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
Work management manual - general: temporary staging for ground assembly and aboard ship. (1982) (page images at HathiTrust; US access only)
Temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
An evaluation of windshield glazing and installation methods for passenger cars. (1985), by Charles Jesse Kahane (page images at HathiTrust)
Estimation of weight and consumer price relating to the implementation of FMVSS 105, 108, 202, 205, and 216 in passenger cars and 201, 203 and 205 in light trucks. Final report. (1982), by R. Gladstone, M. R. Harvey, J. Leschik, and R. McLean (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Appendix B - photographs. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume I. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume II. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume III. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Computerized application of standards. Final report on task ES-8-22. (1985) (page images at HathiTrust; US access only)
Labor standards application program: electrical trade area. Final report. (1985) (page images at HathiTrust; US access only)
Product oriented safety and health management. (1986) (page images at HathiTrust; US access only)
Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 108 and 207. Final report. (1986), by Lloyd E. Carlson and P. Leonard (page images at HathiTrust)
An evaluation of the bumper standard - as modified in 1982. Technical report. (1987), by Warren G. La Heist and F. G. Ephraim (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 105-83. Final report. (1985), by G. J. Adams, Lloyd E. Carlson, and B. W. Firth (page images at HathiTrust)
Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
Data development of detail standards for outside machinery operations. (1985) (page images at HathiTrust; US access only)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume I. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume II. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume III. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume IV. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Manual on uniform traffic control devices for streets and highways. (Government Printing Office, Washington, D.C., 1988) (page images at HathiTrust)
Motor vehicle regulations. Regulatory cost estimates could be improved. (1992) (page images at HathiTrust)
Study designs for passing sight distance requirements. Final report. (1992), by Warren Edward Hughes, Sarath C. Joshua, and Hugh W. McGee (page images at HathiTrust)
Motor vehicle fires in traffic crashes and the effects of the fuel system integrity standard. (1990), by G. G. Parsons (page images at HathiTrust)
Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume I. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume II. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
Cost and leadtime estimates for improved pillar padding, automatic slack adjusters, visual brake adjustment indicators and tractor/trailer ABS connections. Final report. (1994) (page images at HathiTrust)
[Cost per life saved by the FMVSS] (2004), by Charles Jesse Kahane (page images at HathiTrust)
Development and current status of the standard nuclear instrument module (NIM) system. (sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by Louis Costrell (page images at HathiTrust)
Standardization of Work Measurement. Volume 2, Clerical and Sales Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 3, Service Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 4, Farming, Fishery, Forestry, and Related Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 5, Processing Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 6, Machine Trades Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 7, Bench Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 8, Structural Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement, Volume 9, Miscellaneous Occupations (Transportation, Packaging, Materials Handling...). (Defense Technical Information Center, 1977), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 10, Universal, (Common to Two or More Occupations). (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Computer program for analysis of imperfection sensitivity of ring stiffened shells of revolution (National Aeronautics and Space Administration ;, 1971), by Gerald A. Cohen, Langley Research Center, and Philco-Ford Corporation (page images at HathiTrust)
La Convention du mètre et le Bureau international des poids et mesures (Gauthier-Villars, 1902), by Ch.-Ed. Guillaume (page images at HathiTrust; US access only)
Incremental cost, weight and leadtime impacts of adding improved padding to motor vehicle interiors. Final report. (1994), by K. W. Rutland, B. C. Spinney, J. S. Clements, and C. Westphal (page images at HathiTrust)
On the interior regularity of weak solutions of the navier-stokes equations ([Washington, D.C.] : Mathematics Division, Air Force Office of Scientific Research, 1961., 1961), by J. Serrin, United States. Air Force. Office of Scientific Research, and University of Minnesota. Institute of Technology (page images at HathiTrust)

More items available under broader and related terms at left.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.