The Online Books Page

Welding -- Safety measures

See also what's at your library, or elsewhere.

• Welding
• Electric welding
• Oxyacetylene welding and cutting
• Safety measures

• Pipe, Steel -- Welding -- Safety measures
• Welding -- United States -- Safety measures

• Electric welding -- Safety measures
• Oxyacetylene welding and cutting -- Safety measures

• Reduction of airborne contaminants from welding exhaust at surface mines (U.S. Dept. of the Interior, Bureau of Mines, 1982), by G. K. Derby (page images at HathiTrust)
• Welding, brazing, and thermal cutting. (U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, Division of Standards Development and Technology Transfer ;, 1988), by National Institute for Occupational Safety and Health. Division of Standards Development and Technology Transfer (page images at HathiTrust)
• Reduction of airborne contaminants from welding exhaust at surface mines (U.S. Dept. of the Interior, Bureau of Mines, 1982), by G. K. Derby (page images at HathiTrust)
• Report on tests of welding filter plates (U.S. Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control,National Institute for Occupational Safety and Health, Appalachian Laboratory for Occupational Safety and Health ;, 1976), by Donald L. Campbell and United States. Appalachian Laboratory for Occupational Safety and Health (page images at HathiTrust)
• Welding safety. (Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, 1977), by National Institute for Occupational Safety and Health (page images at HathiTrust)
• Welding, brazing, and thermal cutting. (U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, Division of Standards Development and Technology Transfer, 1988), by National Institute for Occupational Safety and Health. Division of Standards Development and Technology Transfer (page images at HathiTrust)
• Control of welding hazards in defense industries (U.S. Government Printing Office, 1941), by United States. Division of Labor Standards (page images at HathiTrust)
• American standard safety in welding and cutting (American Welding Society, 1958), by Safety in Electric and Gas Welding and Cutting Operations American Standards Association. Sectional Committee Z49 (page images at HathiTrust; US access only)
• Recommended procedure to be followed in preparing for welding or cutting certain types of containers which have held combustibles. (American Welding Society, 1940), by American Welding Society. Committee on Safety Recommendations (page images at HathiTrust; US access only)
• Optical radiation transmission levels through transparent welding curtains (Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Biomedical and Behavioral Science, 1978), by C. Eugene Moss, Mary C Gawenda, and National Institute for Occupational Safety and Health. Division of Biomedical and Behavioral Sciences (page images at HathiTrust)
• Engineering control of welding fumes (Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Laboratories and Criteria Development, 1974), by William Astleford and National Institute for Occupational Safety and Health. Division of Laboratories and Criteria Development (page images at HathiTrust)
• Twenty-seven year old welder was fatally injured when the flotation tank that he was welding on exploded (U.S. Dept. of Labor, Mine Safety and Health Administration, Metal and Nonmetal Mine Safety and Health, 1998), by United States. Metal and Nonmetal Mine Safety and Health (page images at HathiTrust)

• Pipe repair problem : problem booklet. (Behavioral Research Aspects of Safety and Health Group, Institute for Mining and Minerals Research, University of Kentucky ;, 1989), by United States Bureau of Mines, Southwest Virginia Community College. Mine Safety Program, and University of Kentucky. Behavioral Research Aspects of Safety and Health Working Group (page images at HathiTrust)

• Twenty-seven year old welder was fatally injured when the flotation tank that he was welding on exploded (U.S. Dept. of Labor, Mine Safety and Health Administration, Metal and Nonmetal Mine Safety and Health, 1998), by United States. Metal and Nonmetal Mine Safety and Health (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Welding Engineering (New York et al.: McGraw-Hill, 1954), by B. E. Rossi (page images at HathiTrust)
• Shipyard Diary of a Woman Welder (New York: Penguin books, c1944), by Augusta Homes Clawson, illust. by Boris Givotovsky (page images at HathiTrust)
• Thermit Welding: Instructions for the Making of Thermit Welds (New York: American Welding Society, 1927), by American Welding Society (page images at HathiTrust)
• Modern methods of welding as applied to workshop practice, describing various methods: oxy-acetylene welding, electric seam welding ... eye-protection in welding operations [etc.] ... (D. Van Nostrand company, 1922), by J. H. Davies (page images at HathiTrust)
• Aircraft torch welding (Pitman publishing corporation, 1941), by Charles Von Borchers and Assaf Ciffrin (page images at HathiTrust)
• Welding stainless steels. (Allegheny Ludlum Steel Corporation, 1943), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Modern welding practice. (Goodheart--Willcox Co., 1951), by Andrew D. Althouse (page images at HathiTrust)
• Oxy-acetylene welding manual (John Wiley & Sons, Inc.; [etc., etc.], 1919), by Lorn Campbell (page images at HathiTrust)
• Weld design (Prentice-Hall, 1949), by Harry D. Churchill and John Benjamin Austin (page images at HathiTrust)
• Welding; a practical treatise on the applications of electric, gas, and thermit welding to manufacturing and repair work. (American technical society, 1921), by George W. Cravens (page images at HathiTrust)
• Cast iron welding by the oxy-acetylene process (The Linde Air Products Company, 1923), by Thomas Cook Fetherston and Linde Air Products Company (page images at HathiTrust)
• Welded steel construction. (Pitman publishing corporation, 1938), by Robert Shepard Hale (page images at HathiTrust)
• Welding metallurgy; iron and steel (American Welding Society, 1949), by Otto Hazelton Henry, George E. Linnert, and Gerard Eden Claussen (page images at HathiTrust)
• Imperial welding and cutting hand book; oxy-acetylene, oxy-hydrogen, carbon burning ... (The Imperial Brass Mfg. Co., 1916), by Chicago Imperial Brass Manufacturing Company (page images at HathiTrust)
• Welding manual, modern welding techniques and materials and their application to practical production. (New York, 1947) (page images at HathiTrust)
• Oxy-acetylene welding practice; a practical presentation of the modern processes of welding, cutting (American technical society, 1917), by Robert J. Kehl and American Technical Society (page images at HathiTrust)
• Fabrication of oxwelded piping. (The Linde air products company, 1933), by Linde Air Products Company (page images at HathiTrust)
• Fundamentals of welding, gas, arc and thermit. (The Penton publishing co., 1923), by James W. Owens (page images at HathiTrust)
• The oxwelder's manual; instructions for welding and cutting by the oxy-acetylene process. (Oxweld acetylene co., 1926), by Oxweld acetylene Company (page images at HathiTrust; US access only)
• Elementary and applied welding. (Bruce Pub. Co., 1948), by Herbert Prentice Rigsby and Chris Harold Groneman (page images at HathiTrust)
• Welding for engineers (Wiley, 1954), by Harry Udin (page images at HathiTrust)
• Gas torch and thermit welding. (McGraw-Hill book company, inc., 1921), by Ethan Viall (page images at HathiTrust)
• The elevated-temperature properties of weld-deposited metal and weldments (American Society for Testing Materials, 1958), by H. R. Voorhees, J. W. Freeman, and ASTM-ASME-MPC Joint Committee on Effect of Temperature on the Properties of Metals. Data and Publications Panel (page images at HathiTrust)
• Forging and welding. (McKnight, 1956), by Robert Ernest Smith (page images at HathiTrust)
• Manual of instructions in welding and cutting (McGraw-Hill Book Company, inc., 1941), by B. E. Rossi (page images at HathiTrust)
• Report of the Committee on welded containers. (H. M. Stationery off., 1930), by Great Britain. Department of scientific and industrial research. Committee on welded containers and Henry Cort Harold Carpenter (page images at HathiTrust)
• How to read shop drawings, with special reference to welding and welding symbols. Welding symbols as standardized by the American Welding Society. (Cleveland, 1961), by Lincoln Electric Company (page images at HathiTrust)
• A text book on welding and cutting metals by the oxyacetylene process (Vulcan Process Co., 1915), by Vulcan Process Co and Charles Herbert Burrows (page images at HathiTrust)
• Corrosion resistance of welded joints; a review of the literature to November 1, 1936 ([New York], 1937), by Welding Research Council (U.S.), Gerard Eden Claussen, and William Spraragen (page images at HathiTrust)
• General shop gas and A. C. are welding and cutting (Grosset & Dunlap, 1942), by Royalston F. Jennings (page images at HathiTrust)
• Taschenbuch der gesamten schweisstechnik (O. Leiner, 1927), by Max Kirchner (page images at HathiTrust; US access only)
• Modern welding methods; oxy-acetylene, thermit, electric arc and resistance. (The Norman W. Henley publishing co., 1920), by Victor Wilfred Pagé (page images at HathiTrust)
• Eantluss der verunrein gungen im sauerstoff und im azetylen auf die wirtschaftlichkeit und gute des schnittes und der schweissnaht (VDI-verlag g. m. b. h., 1929), by Walther Rimarski, Edmund Streb, and Carl Kantner (page images at HathiTrust; US access only)
• Manual of structural welding practice; Saxe system welded connection units for welded assembly. ([Publication Press], 1951), by Van Rensselaer Powell Saxe (page images at HathiTrust)
• Specification for structural steel welding. (U.S. Govt. print. off., 1939), by United States. Bureau of Yards and Docks (page images at HathiTrust)
• Welding design handbook for engineers, designers & supervisors (New York, 1948), by Ted B. Jefferson (page images at HathiTrust)
• Welded pipe fabrication: a gate to greater earnings ([The author], 1946), by Arthur R. Berry (page images at HathiTrust)
• Standard manual on pipe welding. (New York, 1951), by Piping and Air Conditioning Contractors National Association Heating (page images at HathiTrust)
• The metallurgical background for welding austenitic manganese steel. ([American Brake Shoe Co.], 1949), by Howard Shaeffer Avery (page images at HathiTrust)
• Applied electrochemistry and welding : a practical treatise on commercial chemistry, the electric furnace, the manufacture of ozone and nitrogen by high-tension discharges, and the applications of electric, gas, and chemical welding to manufacturing and repair work. Pt. I, Applied electrochemistry, by Charles F. Burgess ... Pt. ii, Welding, by George W. Cravens ... (American technical society, 1920), by Charles F. Burgess and George W. Cravens (page images at HathiTrust)
• Welded deck highway bridges (The Foundation, 1950), by James F. Lincoln Arc Welding Foundation and James G. Clark (page images at HathiTrust)
• Welding of steel structures. Report of the Welding panel of the Steel structures research committee ... (H. M. Stationery off., 1938), by Great Britain. Department of scientific and industrial research. Steel structures research committee and Henry Cort Harold Carpenter (page images at HathiTrust)
• Riveting and arc welding in ship construction. (Simmons-Boardman publishing co.;, 1934), by Henry Eastin Rossell (page images at HathiTrust)
• Welding manual; a reclamation manual specialist supplement. (Denver, 1953), by United States Bureau of Reclamation (page images at HathiTrust)
• J'apprends la soudure autogène. Notions pratiques indispensables d'apprentissage et de prefectionnement. ([La Soudure autogène française], 1925), by R. Granjon, A. Desgranges, and P. Rosemberg (page images at HathiTrust; US access only)
• Simple blueprint reading, with particular reference to welding and welding symbols; welding symbols as standardized by the American welding society ... (The Lincoln electric company; [etc., etc.], 1943), by Lincoln Electric Company and American Welding Society (page images at HathiTrust)
• Welding fundamentals. (Pitman Pub. Corp., 1948), by Herbert Prentice Rigsby (page images at HathiTrust)
• Semi-automatic pipe handling system and fabrication facility. Phase II - implementation. (1983), by Raymond A. Price (page images at HathiTrust; US access only)
• NDT: low cost alternatives to film radiography. (1974) (page images at HathiTrust; US access only)
• Navy weld defect tolerance study. (1981), by L. W. Sandor (page images at HathiTrust; US access only)
• Weld defect tolerance study. Final report. (1978), by L. W. Sandor (page images at HathiTrust; US access only)
• Consensus QA/QC acceptance standards, Task S-31 of the Ship Producibility Research Program. (1982) (page images at HathiTrust; US access only)
• Robotics in shipbuilding workshop. Proceedings. (1982), by 14-16 Oct 1981 Robotics in Shipbuilding Workshop (page images at HathiTrust; US access only)
• Work management manual - Panel Line, National Steel and Shipbuilding Co. (1980), by J. R. Ruecker (page images at HathiTrust; US access only)
• Work management manual - general, Bay Shipbuilding Corporation. (1980) (page images at HathiTrust; US access only)
• General work management manual for NASSCO plate shop. (1982), by G. Bradshaw, Barbara J. Faison, and B. Oakes (page images at HathiTrust; US access only)
• Aluminum welding - out-of-position welding of 5000 series aluminum alloys using pulse GMAW power sources. (1984), by M. Y. Nakata (page images at HathiTrust; US access only)
• Unimation apprentice welding robot for shipyard application. Final report. (1983), by R. K. Nordeen (page images at HathiTrust; US access only)
• Evaluation of the Cincinnati Milacron T3 robot for shipbuilding welding (1984), by J. B. Acton, D. A. Lang, and R. K. Nordeen (page images at HathiTrust; US access only)
• Improved fabrication primer for protection of steel. (1973) (page images at HathiTrust; US access only)
• Plasma processes of cutting and welding. (1976) (page images at HathiTrust; US access only)
• BIW phase III/FY-82 shipyard data application program - panel line/shop scheduling and manloading incentive system evaluation ( welding). Final report. (1983) (page images at HathiTrust; US access only)
• High deposition welding. Volume I (1978) (page images at HathiTrust; US access only)
• Mechanized gas metal arc welding (1979) (page images at HathiTrust; US access only)
• Development of extended length, continuous wire feed systems (1974) (page images at HathiTrust; US access only)
• High deposition welding. Volume II: use of powder metal filler materials for high deposition rate one-side welding. (1978) (page images at HathiTrust; US access only)
• Self-shielded flux cored wire evaluation. Final report. (1980), by A. W. Johnson (page images at HathiTrust; US access only)
• Applicability of laser welding to ship production. Volume II (1979) (page images at HathiTrust; US access only)
• Application of plasma arc to bevel cutting. (page images at HathiTrust; US access only)
• Applicability of firecracker welding to ship production. (1975), by R. M. Evans and R. P. Meister (page images at HathiTrust; US access only)
• Toughness evaluation of electrogas and electroslag weldments. (1975) (page images at HathiTrust; US access only)
• Development of an all position automatic welding machine. (1976) (page images at HathiTrust; US access only)
• SMAW ceramic weld backing evaluation : final report ([Offshore Power Systems?], 1982), by R. E. Cantrell, S. B. Hollwarth, D. J. St. Pierre, Newport News Shipbuilding and Dry Dock Company, United States Maritime Administration, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Extension of E7024 electrode application in shipbuilding. (1980) (page images at HathiTrust; US access only)
• Investigation of welding processes for low temperature applications. (1979) (page images at HathiTrust; US access only)
• National conference on fitness-for-service in shipbuilding. First. Proceedings. (1981), by 1st Fitness-for-Service in Shipbuilding Conference, ed. by L. W. Sandor (page images at HathiTrust; US access only)
• Visual reference standards for weld surface conditions (phase I). (1983), by D. Y. Ku, D. Cantore, and R. F. Waite (page images at HathiTrust; US access only)
• Property and productivity improvements in electroslag and electrogas welding. (1980), by G. H. Reynolds (page images at HathiTrust; US access only)
• Ceramic weld backing evaluation. Final report. (1980), by R. E. Cantrell and D. J. St. Pierre (page images at HathiTrust; US access only)
• Facilities and industrial engineering. Volume 1 - report. (1981) (page images at HathiTrust; US access only)
• Facilities and industrial engineering. Volume 2 - appendices. (1981) (page images at HathiTrust; US access only)
• Study mission to Japan - trip report. (1983) (page images at HathiTrust; US access only)
• Japanese technology that could improve U.S. shipbuilding productivity. (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
• Tank sealing with coating materials. (1983) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume I. (1982) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume II. (1982) (page images at HathiTrust; US access only)
• Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
• Applicability of laser welding to ship production ([U.S. Maritime Administration?], 1974), by C. M. Banas, G. T. Peters, United States Maritime Administration, United Aircraft Corporation. Research Laboratories, Society of Naval Architects and Marine Engineers (U.S.). Ship Production Committee, National Shipbuilding Research Program, and Bethlehem Steel Corporation (page images at HathiTrust; US access only)
• Development of a portable AC/DC welding power supply module (1974) (page images at HathiTrust; US access only)
• One side welding - flux development and study of multiple arc behavior. (1974) (page images at HathiTrust; US access only)
• Dynamic tear test correlation with explosion bulge test at the same temperature. (1979) (page images at HathiTrust; US access only)
• Work management manual - panel assembly platen area. (1980), by William S. Oakes (page images at HathiTrust; US access only)
• Work management manual - pipe fabricating shop. (1981), by D. Fulwiler, D. Kressig, and J. Tong (page images at HathiTrust; US access only)
• Study of fitting and fairing aids of U.S. shipyards. Final report. (1984) (page images at HathiTrust; US access only)
• Fitting and welding cylinders. (1985), by S. L. Roggendorff (page images at HathiTrust; US access only)
• Evaluation of an automatic seam tracking/adaptive control welding system for shipyard applications, 1983-1984. Phase I report. (1985), by N. D. Fichtelberg (page images at HathiTrust; US access only)
• Acceptance standards for nondestructive test not required by classification (phase II) (1985) (page images at HathiTrust; US access only)
• Visual reference standards for weld surface conditions (phase II). (1985), by D. Y. Ku, R. F. Waite, and D. Cantore (page images at HathiTrust; US access only)
• Application of labor standards for scheduling, production control and manpower leveling. Final report. (1984) (page images at HathiTrust; US access only)
• DDGX program producibility studies: study no. 7 - NAVTRUSS structure phase I. (1982), by H. L. Cheyne (page images at HathiTrust; US access only)
• Updating of fillet weld strength parameters for commercial shipbuilding. Final report. (1983), by R. P. Krumpen and C. R. Jordan (page images at HathiTrust; US access only)
• Three dimensional accuracy control variation merging equations. Final report. (1986), by Richard Lee Storch and P. J. Giesy (page images at HathiTrust; US access only)
• Consumable guide electroslag welding of 4 to 24 inch thick carbon steel castings. Final report. (1986), by P. D. Thomas (page images at HathiTrust; US access only)
• Study of the mechanised manufacture and welding of reinforced shell units from rolled shell plate and tee bar segments. (1986), by S. L. Roggendorff (page images at HathiTrust; US access only)
• Automatic submerged arc welding with metal powder additions to increase productivity and maintain quality. Final report. (1986), by P. D. Thomas (page images at HathiTrust; US access only)
• Basic research on the introduction of welding robots to commercial shipbuilding. Final report. (1985), by John E. Agapakis, T. Somers, Nicholas Alexis Koreisha, and K. Masubuchi (page images at HathiTrust; US access only)
• Evaluation of high-strength steels produced by advanced metallurgical processes. Final report (National Shipbuilding Research Program, 1987), by Newport News Shipbuilding and Dry Dock Company, American Bureau of Shipping, Ingalls Shipbuilding, United States Maritime Administration, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Tracking system for automatic welding. Phase II - improvement of contact-tip life for through-the-arc welding system. Final report. (1989) (page images at HathiTrust; US access only)
• Fatigue characterization of fabricated ship details for design - phase II. Final technical report. (1988), by S. K. Park and Frederick VanBuren Lawrence (page images at HathiTrust; US access only)
• Guide to weldability of steels, a proposed system of determining the effect of welding procedure upon the ductility of the heated zone adjacent to the weld in plain carbon and alloy steels. (American welding society, 1944), by American Welding Society (page images at HathiTrust)
• Simple blueprint reading, with particular reference to welding and welding symbols. (The Lincoln Electric Co., 1940), by Lincoln Electric Company and American Welding Society (page images at HathiTrust)
• Manual of recommended practice (Saxe System Welded Connection Units for Welded Assembly, 1948), by Van Rensselaer P. Saxe (page images at HathiTrust)
• Report of Structural Steel Welding Committee, September, 1931. (Amer. Welding Soc., 1931), by American Bureau of Welding. Structural Steel Welding Committee (page images at HathiTrust)
• Recommended practices for salvaging automotive gray iron castings by welding (tentative). Approved by Board of directors, March 21, 1950. (New York, 1950), by American Welding Society. Automotive Welding Committee (page images at HathiTrust)
• Standard rules for field welding of steel storage tanks (The Society, 1947), by American Welding Society (page images at HathiTrust)
• Standard rules for field welding of steel storage tanks : approved by Board of Directors, March 31, 1952. (American welding society, 1952), by American Welding Society. Committee on Rules for Field Welding of Storage Tanks (page images at HathiTrust)
• Rules for welding piping in marine construction, carbon steel only (American Welding Society, 1948), by American Welding Society. Committee on Welding in Marine Construction (page images at HathiTrust)
• Sheet metal welding by the oxy-acetylene process (Linde air products Co., 1925), by Thomas Cook Fetherston and Linde Air Products Company (page images at HathiTrust)
• Welding, joining and cutting of gray iron (Gray Iron Founders' Society, 1951), by Charles Owen Burgess (page images at HathiTrust)
• Welding; theory, practice, apparatus and tests, electric, thermit and hot-flame processes (McGraw-Hill book company, 1910), by Richard N. Hart (page images at HathiTrust)
• Miscellaneous uses of the oxy-acetylene and air-acetylene flames (The Association, 1945), by International Acetylene Association (page images at HathiTrust)
• Welding -- its questions and answers (Welding engineer Pub. Co., 1942), by Ted B. Jefferson (page images at HathiTrust)
• Autogenous welding and cutting (McGraw-Hill book company, inc., 1915), by Theo. Kautny, trans. by James Forbes Whiteford (page images at HathiTrust)
• Oxy-acetylene welding practice; a practical presentation of the modern processes of welding, cutting, and lead burning, with special attention to welding technique for steel, cast iron, aluminum, copper and brass (American technical society, 1920), by Robert J. Kehl and American Technical Society (page images at HathiTrust)
• Learning to weld. (The Company, 1947), by Lincoln Electric Company (page images at HathiTrust)
• Das autogene Schweiss- und Schneidverfahren (G.J. Göschen, 1910), by Hans Niese (page images at HathiTrust; US access only)
• Oxy-acetylene welding and cutting; a course of instruction (University printing Co., 1931), by Stuart Plumley (page images at HathiTrust)
• Sample pipe welding specifications (The Association, 1935), by International Acetylene Association (page images at HathiTrust)
• Underwater cutting and welding manual. (For sale by the Supt, of Docs., U.S. Govt. Print. Off., 1954), by United States. Dept. of the Navy. Bureau of Ships (page images at HathiTrust)
• Oxy-acetylene welding; a comprehensive treatise on the practice of welding cast iron, malleable iron, steel, copper, brass, bronze, and aluminum by the oxy-acetylene methods, together with concise information on the equipment required for both welding and cutting by this process (The Industrial press; [etc., etc.], 1916), by Samuel Wylie Miller (page images at HathiTrust)
• Ultrasonic welding of metals (Dept. of Commerce, Office of Technical Services, 1955), by J. Byron Jones, United States. Dept. of Commerce. Office of Technical Services, and Aeroprojects Incorporated (page images at HathiTrust)
• Modern welding practice (Goodheart-Willcox, 1958), by Andrew Daniel Althouse and Carl Harold Turnquist (page images at HathiTrust)
• Minerals used in welding (U.S. Dept of the Interior, Bureau of Mines, 1940), by Oliver C. Ralston, M.W. Von Bernewitz, and United States Bureau of Mines (page images at HathiTrust)
• Aircraft torch welding (Pitman, 1942), by Charles Von Borchers and Assaf Ciffrin (page images at HathiTrust)
• Airplane welding (The Goodheart-Willcox company, inc., 1929), by John Berlin Johnson (page images at HathiTrust)
• Automobile welding with the oxy-acetylene flame; a practical treatise, covering the repairing of automobiles by welding, with a non-technical explanation of the principles to be guided by in the successful welding of the various metals. Helpful to all users or prospective users of the oxy-acetylene flame, since the fundamentals for successful repair welding are clearly outlined. (Norman W. Henley Publishing Co., 1916), by Melbourne Keith Dunham (page images at HathiTrust; US access only)
• Oxy-acetylene welding manual (Wiley ;, 1919), by Lorn Campbell (page images at HathiTrust; US access only)
• The oxy-acetylene welder's handbook; a complete and practical manual of modern practice (The Acetylene journal publishing co., 1929), by M. S. Hendricks (page images at HathiTrust; US access only)
• Autogenous welding of metals : tr. from reports of the National School of Arts and Trades of France (The Boiler maker, 1908), by L. L. Bernier (page images at HathiTrust)
• Electric arc and oxy-acetylene welding; a practical handbook for works managers, welding operators and students (Sir I. Pitman & sons, ltd., 1923), by Evan Arthur Atkins (page images at HathiTrust; US access only)
• Metalsmith 1 & C. (U.S. Govt. Print. Off., 1957), by United States Bureau of Naval Personnel (page images at HathiTrust)
• Metalsmith 3c and 2c. (U.S. Govt. Print. Off., 1946), by United States Bureau of Naval Personnel (page images at HathiTrust)
• Welding and cutting metals by aid of gases or electricity (Van Nostrand, 1909), by L. A. Groth (page images at HathiTrust)
• Applied electrochemistry and welding; a practical treatise on commercial chemistry, the electric furnace, the manufacture of ozone and nitrogen by high tension discharges, and the applications of electric, gas and chemical welding to manufacturing and repair work. Part I-- Applied electrochemistry (American technical society, 1917), by Charles Frederick Burgess and George W. Cravens (page images at HathiTrust)
• Aluminothermie (S. Hirzel, 1925), by Karl Goldschmidt and Hans Goldschmidt (page images at HathiTrust; US access only)
• Report. (The Society, 1931), by American Welding Society. Structural Steel Welding Committee (page images at HathiTrust)
• Oxwelded construction for modern piping sevices. (The Company, 1929), by Linde Air Products Company (page images at HathiTrust)
• Schweisstechnik (VDI-Verlag, 1926), by P. Bardtke (page images at HathiTrust; US access only)
• The Welding encyclopedia (The Welding Engineer Publishing Co., 1947), by L. B. Mackenzie and Ted B. Jefferson (page images at HathiTrust)
• The effect of simulated weld thermal cycles on the properties of hastelloy B (Oak Ridge National Laboratory, 1956), by Ernest G. Thompson and U.S. Atomic Energy Commission (page images at HathiTrust)
• Evaluation of welded and seamless zirconium and zircaloy-2 tubing : final report (U.S. Atomic Energy Commission, 1958), by S. H. Bush, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Zircaloy welding techniques deeloped for plutonium recycle program UO₂ fuel element fabrication (U.S. Atomic Energy Commission, 1960), by L. E. Mills, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Evaluation of welded and seamless zirconium and zircaloy-2 tubing : interim report (U.S. Atomic Energy Commission, 1958), by S. H. Bush, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Remote welding of stainless steel containers (Oak Ridge National Laboratory, 1957), by E. E. Pierce, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Operations Division (page images at HathiTrust)
• Notes on welding systems; paper read before Institute of Engineers and Shipbuilders of Scotland ([Washington, 1918), by James Caldwell and United States Shipping Board Emergency Fleet Corporation. Education and Training Section (page images at HathiTrust)
• Applied electrochemistry and welding; a practical treatise on commercial chemistry, the electric furnace, the manufacture of ozone and nitrogen by high tension discharges, and the applications of electric, gas and chemical welding to manufacturing and repair work. Part I-- Applied electrochemistry (American technical society, 1914), by Charles Frederick Burgess, George W. Cravens, and American Technical Society (page images at HathiTrust)
• Welding and cutting metals by aid of gases or electricity. (D. Van Nostrand Co., 1912), by L. A. Groth (page images at HathiTrust)
• Welding : theory, practice, apparatus and tests, electric, thermit and hot-flame processes. (McGraw-Hill book Co., Inc., 1914), by Richard N. Hart (page images at HathiTrust)
• The welding of non-ferrous metals. (J. Wiley, 1951), by E. G. West (page images at HathiTrust)
• Simple blueprint reading, with particular reference to welding and welding symbols (The Lincoln electric company; [etc., etc., 1941), by Lincoln Electric Company and American Welding Society (page images at HathiTrust)
• General shop gas and A. C. arc welding and cutting (McKnight & McKnight, 1937), by Royalston F. Jennings (page images at HathiTrust)
• Welding for electronic assemblies. (National Aeronautics and Space Administration, 1954), by George C. Marshall Space Flight Center and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Explosive welding (American Society of Tool and Manufacturing Engineers, 1961), by Donald E. Davenport (page images at HathiTrust)
• Explosive welding. (American Society of Tool and Manufacturing Engineers., 1962), by Donald E. Davenport (page images at HathiTrust)
• Interim summary report on the development program for resistance, spot and seam welding of aluminum alloys. Phase III: Development and standardization of design criteria. (Akron, Ohio, 1956), by Goodyear Aircraft Corporation (page images at HathiTrust; US access only)
• The structural stability of welds in columbium alloys. Technical documentary report no. ML-TDR-64-210. (Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, 1964), by General Electric Company, D. L. Keller, and R. E. Yount (page images at HathiTrust)
• Oxwelded construction for modern piping services. (The Linde Air Products Company, 1930), by Linde Air Products Company (page images at HathiTrust)
• Welded pipe fabrication; a course of instruction explaining all common cuts and layouts made on pipe, with explanations of short methods, the mathematics needed, and the tools used in developing patterns for, calculating, and fabricating any welded piping system. (Baton Rouge, La., 1946), by Arthur R. Berry (page images at HathiTrust)
• Minutes of the seventh annual Atomic Energy Commission Welding Conference, held in Chicago, Illinois, November 6 thru [sic] 8, 1957. ([Oak Ridge, Tenn.?], 1959), by U.S. Atomic Energy Commission and Chicago Atomic Energy Commission Welding Conference. 7th (page images at HathiTrust)
• Guide to weldability of steels ... (Welding Research Council, 1943), by Welding Research Council (U.S.) (page images at HathiTrust)
• An investigation of oxyacetylene welding and cutting blowpipes (U.S. Dept. of Commerce, Bureau of Standards :, 1922), by Robert Smith Johnston and United States. National Bureau of Standards (page images at HathiTrust)
• A visit to the Regent Iron & Brass Foundery, the Gas Manufactory and the Royal Chain Pier, Brighton (Royston : Printed and published by J. Warren : Sold also by Longman & Co., Harris & Sons, Souter, & Hodgson & Co., London, & Saunders, St. James' St., Brighton, 1824., 1824), by Elizabeth Sandham (page images at HathiTrust)
• Airco welding of locomotive fireboxes. (Air reduction sales company, 1919), by New York Air reduction sales company (page images at HathiTrust)
• Davis-Bournonville oxy-acetylene welding and cutting course of instruction. Lectures. Welding and cutting with the oxy-acetylene torch. (Davis-Bournonville Institute, 1919), by Davis-Bournonville Institute (page images at HathiTrust)
• Oxy-acetylene welding and cutting, including information on acetylene, oxygen, electric welding; a practical and complete work on the use and maintenance of apparatus, and the weling of various metals--including special castings and parts. (The Norman W. Henley publishing co., 1922), by Prior F. Willis (page images at HathiTrust)
• Welding and cutting; instructions for the care and use of oxy-acetylene apparatus and equipment. (Davis-Bournonville Company, 1921), by Fred E. Rogers and Jersey City Davis-Bournonville Company (page images at HathiTrust)
• Oxy-acetylene welding of copper, brasses and bronzes. (Raggett & co., 1918), by Raoul Amédéo and David Richardson (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 8, Structural Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Weldability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessman, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
• Long-time temperature stability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessman, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
• Effect of contamination level on weldability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by D. R. Stoner, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
• Post weld annealing studies of T-111. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessmann, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
• NASA CR-1641 (National Aeronautics and Space Administration ;, 1971), by Raymond W. Buckman, Richard C. Goodspeed, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Electric Corporation. Astronuclear Laboratory (page images at HathiTrust)
• Precipitation strengthened tantalum base alloys (National Aeronautics and Space Administration ;, 1971), by Raymond W. Buckman, Richard C. Goodspeed, United States. National Aeronautica and Space Administration, Lewis Research Center, and Westinghouse Electric Corporation. Astronuclear Laboratory (page images at HathiTrust)
• Correlation of stress-wave-emission characteristics with fracture aluminum alloys (National Aeronautics and Space Administration ;, 1972), by Carl E. Hartbower and Advanced Technology. Aerojet Solid Propulsion Company (page images at HathiTrust)
• Weldability of tungsten base alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessmann, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
• Solid-state welding processes for an oxide dispersion strengthened nickel-chromium-aluminum alloy (National Aeronautics and Space Administration ;, 1975), by Thomas J. Moore and Lewis Research Center (page images at HathiTrust)
• NASA TN D-2321 (National Aeronautics and Space Administration :, 1964), by John C. Lyons, David R. Dargo, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-5917 (National Aeronautics and Space Administration :, 1970), by Kenneth H. Holko, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Development of a weld quality monitor (U.S. National Aeronautics and Space Administration, 1969), by J. G. Etzel, J. A. Munford, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Hot press and roll welding of titanium-6-percent-aluminum-4-percent-vanadium bar and sheet with auto-vacuum cleaning (National Aeronautics and Space Administration ;, 1972), by Kenneth H. Holko and Lewis Research Center (page images at HathiTrust)
• An improved diffusion welding technique for TD-NiCR sheet (National Aeronautics and Space Administration ;, 1973), by Kenneth H. Holko and Lewis Research Center (page images at HathiTrust)
• Automobile welding with the oxy-acetylene flame; a practical treatise, covering the repairing of automobiles by welding, with a non-technical explanation of the principles to be guided by in the successful welding of the various metals. Helpful to all users or prospective users of the oxy-acetylene flame, since the fundamentals for successful repair welding are clearly outlined. (The Norman W. Henley Publishing Co., 1917), by Melbourne Keith Dunham (page images at HathiTrust)
• Oxy-acetylene welding and cutting (The Prest-o-lite Co., Inc., 1916), by H. Sidney Smith and Albert F. Brennan (page images at HathiTrust)
• Handbuch der autogenen metallbeareitung (C. Marhold, 1912), by Theo Kautny (page images at HathiTrust; US access only)
• A practical manual of oxy-acetylene welding and cutting, with a treatise on acetylene and oxygen (St. Louis, Mo., 1919), by Prior F. Willis (page images at HathiTrust)
• Instructions on welding and cutting of metals, oxyacetylene process. (Vulcan Process Co., 1914), by Vulcan Process Co (page images at HathiTrust)
• Welding; theory, practice, apparatus and tests, electric, thermit and hot-flame processes (McGraw-Hill book company, inc., 1914), by Richard N. Hart (page images at HathiTrust)
• A practical manual of autogenous welding (oxy-acetylane) : ... (Charles Griffin & Co., 1918), by R. Granjon, D. Richardson, and P. Rosemberg (page images at HathiTrust; US access only)
• The design and construction of a recording rail-bond tester (1909), by William Arthur Butler and Carl Henry Hoge (page images at HathiTrust; US access only)
• Determination of the strength of thermit welds (1912), by Frank Ellwood Gooding (page images at HathiTrust; US access only)
• A Power supply for an electron beam welder (E.I. Du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory :, 1962), by Harold S. Sanders, Savannah River Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Experiments on the elastic deformations of autogenous (oxy-acetylene) welds and of welded drums. ([Sydney, 1913), by S. H. Barraclough (page images at HathiTrust; US access only)
• Means for making uniform circular heliarc welds by deflecting the ion beam continuously (U.S. Atomic Energy Commission, Technical Information Service, 1951), by E. R. Mann, U.S. Atomic Energy Commission, and Aircraft Nuclear Propulsion Project (U.S.) (page images at HathiTrust)
• Applications of cutting and welding processes (Union Carbide Nuclear Company, Paducah Plant, 1959), by E. C. Alexander, J. D. Nicol, Carbide and Carbon Chemicals Corporation, Union Carbide Nuclear Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Welding instructions (U. S. Govt. print. off, 1944), by United States. Maritime Commission (page images at HathiTrust; US access only)
• The welding of type 347 steels : the effect of various heat treatments on the tensile properties of modified type 347 weld deposits. (Arcos Corp., 1953), by Lorin K. Poole and U.S. Atomic Energy Commission (page images at HathiTrust)
• The welding of type 347 steels : technical report no. 1 on the effect of composition and microstructure on the mechanical properties and crack sensitivity of type 347 weld metals. (Arcos Corp., 1952), by Lorin K. Poole and U.S. Atomic Energy Commission (page images at HathiTrust)
• Units in forging and welding (McCormick-Mathers Pub. Co., 1941), by Robert Ernest Smith and Eugene Harold Mattingly (page images at HathiTrust; US access only)
• Step by step in oxwelding a crank case. (Linde Air Products Company, 1925), by Linde Air Products Company (page images at HathiTrust)
• Control of fissuring in Inconel by regulating process variables (Knolls Atomic Power Laboratory, General Electric Company, 1961), by J. D. Carey, G. F. McKittrick, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• The welding of type 347 steels : weld qualification tests on modified type 347 welding electrodes (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by Lorin K. Poole, Acros Corporation, U.S. Atomic Energy Commission. New York Operations Office, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• The welding of type 347 steels : statisitcal analysis of effects of various elements on the crack sensitivity of fully austenitic type 347 welds (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1956), by Arthur Hoerl, Thomas J. Moore, Acros Corporation, U.S. Atomic Energy Commission. New York Operations Office, and U.S. Atomic Energy Commission. Technical Information Service Extension (page images at HathiTrust)
• Recommended practices for resistance welding (tentative) (American Welding Society, 1946), by American Welding Society. Resistance Welding Committee (page images at HathiTrust; US access only)
• The welding encyclopedia, a practical reference book on metallic arc, carbon arc, oxy-acetylene, electric spot, but, flash and resistance welding, thermit welding, and metal spraying. (Welding Engineer Pub. Co., 1938), by L. B. Mackenzie, Stuart Plumley, and Harold Sumner Card (page images at HathiTrust; US access only)
• Plasma welding and cleaning (Redstone Arsenal, Alabama : Research Branch, Redstone Scientific Information Center, 1964., 1964), by H. E. Pattee, D. C. Martin, M. D. Randall, George C. Marshall Space Flight Center, U.S. Army Aviation and Missile Command, Battelle Memorial Institute, U.S. Atomic Energy Commission, and Redstone Scientific Information Center (page images at HathiTrust)
• Survey of alternating-current power supplies for welding (Redstone Arsenal, Alabama : Research Branch, Redstone Scientific Information Center, 1964., 1964), by H. E. Pattee, D. C. Martin, M. D. Randall, George C. Marshall Space Flight Center, U.S. Army Aviation and Missile Command, Battelle Memorial Institute, U.S. Atomic Energy Commission, and Redstone Scientific Information Center (page images at HathiTrust)
• Welding and brazing : a bibliography of unclassified report literature (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service, 1955., 1955), by Gifford A. Young and U.S. Atomic Energy Commission (page images at HathiTrust)
• Welding and brazing : a bibliography of unclassified report literature. (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service Extension, 1956., 1956), by U.S. Atomic Energy Commission (page images at HathiTrust)
• Welding and brazing : a literature search (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service Extension, 1960., 1960), by Theodore F. Davis and U.S. Atomic Energy Commission (page images at HathiTrust)
• The welding and flame cutting of wrought iron (Byers, 1942), by Pittsburgh Byers (A.M.) Co. (page images at HathiTrust; US access only)
• The welding and flame cutting, and flame descaling of wrought iron. (A. M. Byers, 1941), by A.M. Byers Company. Engineering Service Department (page images at HathiTrust; US access only)
• Welded pressure vessels : report of the Pressure Vessel Committee of the American Bureau of Welding; a Joint Advisory Committee of American Welding Society and Engineering Division of National Research Council, on Welding Research and Standardization. (New York, 1923), by American Bureau of Welding. Pressure Vessel Committee, National Research Council (U.S.). Division of Engineering, and American Welding Society (page images at HathiTrust)
• Welding and brazing Alcoa aluminum. (Aluminum company of America, 1942), by Aluminum Company of America (page images at HathiTrust; US access only)
• Simple blueprint reading, with particular reference to welding and welding symbols; welding symbols as standardized by the American welding society ... (The Lincoln electric company; [etc., etc., 1948), by Lincoln Electric Company and American Welding Society (page images at HathiTrust; US access only)
• Tentative rules for field welding of storage tanks (American Welding Society, 1940), by American Welding Society (page images at HathiTrust; US access only)
• Welding symbols and instructions for their use ... (American Welding Society, 1942), by American Welding Society. Committee on Symbols and American Standards Association (page images at HathiTrust; US access only)
• Resistance welding : instructions for beginners in the operation of resistance welders (The Society, 1927), by American Welding Society. Educational Committee (page images at HathiTrust)
• Oxy-acetylene welding and cutting : a course of instruction (University printing company, 1930), by Stuart Plumley (page images at HathiTrust; US access only)
• Cast iron welding by the oxy-acetylene process. (The Linde air products company, 1925), by Thomas Cook Fetherston (page images at HathiTrust)
• ... Tests of riveted and welded steel columns (Lehigh university, 1932), by Willis Appleford Slater and Merton Otis Fuller (page images at HathiTrust; US access only)
• The strength of oxyacetylene welds in steel (The University, 1910), by Herbert L. Whittemore (page images at HathiTrust)
• Tests of oxyacetylene welded joints in steel plates / by Herbert F. Moore. (University of Illinois, 1917), by Herbert F. Moore (page images at HathiTrust)
• Utilizing two welding processes in tandem (Paducah, Kentucky : Union Carbide Nuclear Company, Paducah Plant, [1959], 1959), by E. C. Alexander, J. D. Nicol, Union Carbide Nuclear Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The welding of type 347 steels : the effect of various heat treatments on the notched bar impact properties of modified type 347 weld deposits (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• The welding of type 347 steels : the results of nitric acid and copper sulfate-sulfuric acid tests on modified type 347 weld deposits (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1955., 1955), by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• The incidence of cracking in the welding of type 347 steels (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1952., 1952), by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Audels welders guide (T. Audel & Co., 1944), by Frank Duncan Graham (page images at HathiTrust; US access only)
• The welding encyclopedia; a practical reference book on autogenous welding (The Welding Engineer Publishing Co., 1923), by L. B. Mackenzie and Harold Sumner Card (page images at HathiTrust)
• Shop instructions for the use of thermit in repair work. (Goldschmidt Thermit Company, 1908), by Goldschmidt Thermit Company (page images at HathiTrust)
• Weldability standards for alternate aircraft steels (American Welding Society, 1944), by American Welding Society. Aircraft Welding Standards Committee (page images at HathiTrust; US access only)
• Code for fusion welding and gas cutting in building construction (American Welding Society, 1930), by American Welding Society (page images at HathiTrust; US access only)
• Code of minimum requirements for instruction of welding operators ... (American Welding Society, 1942), by American Welding Society. Committee on Minimum Requirements of Instructions for Welding Operators in Trade Schools (page images at HathiTrust; US access only)
• Forging ahead in the welding business : a course explaining the art and science of the starting and operating procedures for a welding job shop, contracting business. (R. Hale, 1945), by Robert Shepard Hale (page images at HathiTrust; US access only)
• Gas and a. c. arc welding and cutting. (McKnight & McKnight, 1956), by Royalston F Jennings (page images at HathiTrust; US access only)
• Welding. (U. S. Govt. Print. Off., 1942), by United States War Department (page images at HathiTrust)
• Standard qualification procedure. (American Welding Society, 1938), by American Welding Society (page images at HathiTrust; US access only)
• Inspection method used in manufacture of U-69 and U-70 pressure vessels [report (American welding society], 1938), by American Welding Society (page images at HathiTrust; US access only)
• Welding and soldering of Armco stainless steels. ([Middletown, Ohio, 1958), by Armco Steel Corporation (page images at HathiTrust; US access only)
• Oxwelded roof trusses; a study of insert plate joints in Fink type roof trusses (The Linde Air Products Company, 1927), by Herbert Henry Moss (page images at HathiTrust)
• The behavior of fillet welds when subjected to bending stresses ... ([New York, 1935), by Norman G. Schreiner and American Welding Society. Structural Steel Welding Research Committee (page images at HathiTrust; US access only)
• The blacksmith and the welder. (U. S. Govt. Print. Off., 1941), by United States War Department (page images at HathiTrust)
• Welding of high-strength steels for aircraft and missile applications (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by Herbert W. Mishler, P. J. Rieppel, R. E. Monroe, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• The welding of titanium and titanium alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by G. E. Faulkner and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• New developments in the welding of metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by P. J. Rieppel and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Electron-beam processes (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1962., 1962), by Herbert W. Mishler, R. E. Monroe, Defense Metals Information Center (U.S.), and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• Symposium on the welding : The technical cooperation program (TTCP) sub-group P on materials working panel on metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1967., 1967), by Defense Metals Information Center (page images at HathiTrust)
• Surface welding in the space environment (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by R. M. Evans, R. E. Monroe, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Explosive bonding (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1967., 1967), by V. D. Linse, R. J. Carlson, R. H. Wittman, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• American Buildings Company, El Paso, Illinois ([Atlanta, Ga.?] : U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, [1995], 1995), by National Institute for Occupational Safety and Health (page images at HathiTrust)
• Weldments (Materials & methods, 1947), by Edwin Laird Cady (page images at HathiTrust; US access only)
• A short course in oxy-acetylene welding (Air Reduction Sales Co., 1918), by Alfred Seguine Kinsey (page images at HathiTrust)
• Fusion or autogenous welding; a brief description of various processes, electric, oxy-hydrogen, oxy-coal gas, oxy-acetylene, chapter on cutting. (The Prest-O-Lite company, inc., 1914), by inc Prest-O-Lite Company (page images at HathiTrust)
• Techniques in welding copper. (New York, 1947), by Revere Copper and Brass Incorporated (page images at HathiTrust; US access only)
• Instruction book for silver brazing navy piping : Navy Department general specifications for inspection of material, appendix VII, welding, part C, section C-11, dated June 1, 1943 (Walworth Company, 1943), by United States. Navy Dept and Inc Walworth Company (page images at HathiTrust)
• Code for arc and gas welding in building construction (tentative) (Superseding the "Code for fusion welding and gas cutting in building construction, Part A--Structural steel," (American Welding Society, 1941), by American Welding Society (page images at HathiTrust; US access only)
• Induction welding for remote maintenance, final report (Office of Technical Services, U.S. Dept. of Commerce, 1960), by D. E. Dean, U.S. Atomic Energy Commission, and Babcock & Wilcox Company (page images at HathiTrust)
• Special welding techniques : final summary report (United States Atomic Energy Commission, Technical Information Service Extension ;, 1957), by John Mueller, James Siltanen, William Maxwell, Martin Company. Nuclear Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Welding research problems (New York, N.Y., 1945), by Engineering Foundation (N.Y.). Welding Research Council (page images at HathiTrust; US access only)
• Oxy-acetylene torch practice : a book for the men who use the oxy-acetylene welding and cutting torches (Richardson Press, 1910), by J. F. Springer (page images at HathiTrust)
• Oxyacetylene welding and cutting instruction course (lectures) (Air Reduction, 1942), by Air Reduction (page images at HathiTrust; US access only)
• Shipyard welding (Washington, U.S. Govt. Print. Off., 1943., 1943), by United States. Maritime Commission (page images at HathiTrust)
• Specifications for welded highway and railway bridges : design construction and repair. (American Welding Society, 1938), by American Welding Society (page images at HathiTrust; US access only)
• Space nuclear safety and fuels program : April 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Testing. ([Washington, D.C., 1944), by United States. Office of Education. Department of Visual Aids for War Training (page images at HathiTrust)
• Recommended fundamental principles, tentative minimum requirements and tentative standard welded connections for tier buildings. (American Institute of Steel Construction, 1939), by American Institute of Steel Construction (page images at HathiTrust; US access only)
• Investigation of weldability of hot-work tool steels (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by N. A. Sinclair, R. P. Sopher, J. G. Maciora, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and General Dynamics Corporation. Electric Boat Division (page images at HathiTrust)
• Design of welded trusses : (Pratt truss) (Schenectady, N.Y. : General Electric Co., [between 1936 and 1946], 1936), by Andrew Vogel (page images at HathiTrust; US access only)
• Mechanical department ... : automobiles, tractors, welding ([YMCA, between 1000 and 1999), by Ohio) Young Men's Christian Association (Columbus (page images at HathiTrust)
• Fusion welding of beryllium (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by B. M. MacPherson, Wallace W. Beaver, United States. Air Force. Air Research and Development Command, Brush Beryllium Company, United States. Air Force. Systems Command, and United States. Air Force. Aerospace Defense Command (page images at HathiTrust)
• Damage due to welding between precast concrete units (Austin, 1952), by Texas State University. Civil Engineering Research Laboratory and Hudson Matlock (page images at HathiTrust; US access only)
• Electric and oxy-acetylene welding ; an instruction book in arc, spot, butt and flash electric welding, gas welding and cutting, hand forging and welding, thermit welding, brazing and soldering (Chicago : F. J. Drake & Co., [1941], 1941), by Harold P. Manly (page images at HathiTrust; US access only)
• Welding and brazing Alcoa aluminum. (Aluminum Company of America, 1947), by Aluminum Company of America (page images at HathiTrust; US access only)
• Instructions in aircraft welding ; oxyacetylene (exercises) . (New York, N.Y. : Air Reduction, [1940], 1940), by Air Reduction Company (page images at HathiTrust; US access only)
• Some features in the path of a crack (London : The Institution, [1926], 1926), by Gilbert Henry Gulliver (page images at HathiTrust)
• Über elektrisch und autogen geschweisste Konstruktionen (Zürich : [E.T.H.], 1926., 1926), by Ernst Höhn and Eidgenössische Materialprüfungs- und Forschungsanstalt (page images at HathiTrust; US access only)
• Progress report. (Office of the Secretary, Engineering Societies Building, 1922), by Committee on Welded Rail Joints (page images at HathiTrust; US access only)
• Oxy-acetylene welding manual, by Lorn Campbell (Gutenberg ebook)
• Soldering, Brazing and Welding, ed. by Bernard E. Jones (Gutenberg ebook)

More items available under broader and related terms at left.