The Online Books Page

Wood bending

See also what's at your library, or elsewhere.

• Bending
• Woodwork

• Predicting bending strength of fire retardant treated plywood from screw-withdrawal tests (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1998), by Jerrold E. Winandy, William Nelson, Patricia K. Lebow, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of veneer grade on bending and compression of COM-PLY truss lumber (U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station ;, 1983), by Robert H. McAlister, N.C.) Southeastern Forest Experiment Station (Asheville, and United States. Dept. of Housing and Urban Development (page images at HathiTrust)
• Bending properties of four-layer nail-laminated posts (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994), by G. D. Williams, R. C. Moody, David R. Bohnhoff, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Buckling of simply supported plywood plates under combined edgewise bending and compression (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1965), by John J. Zahn and Karl Romstad (page images at HathiTrust)
• Bent timber ships and universal wood bending machinery : two prize medals awarded at the International Exhibition, Philadelphia, 1876 (s.n.], 1876), by John W. Griffiths (page images at HathiTrust)
• Bending solid wood to form (U.S. Dept. of Agriculture, Forest Service, 1957), by Edward C. Peck (page images at HathiTrust)
• Methods of computing the strength and stiffness of plywood strips in bending (United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1946), by Alan D'Yarmett Freas, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Wood bending in ship building (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1943), by Edward C. Peck and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Bag-molding of plywood (Forest Products Laboratory, 1943), by Bruce G. Heebink and Forest Products Laboratory (U.S.) (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Structure verification of bus passenger seats. Final report. (1973), by E. L. Sittler (page images at HathiTrust)
• Investigation of test parameters affecting flexion properties of part 572 dummy neck, lumbar spine, and abdomen. (1975), by E. Enserink and C. Bonelli (page images at HathiTrust)
• Classification of automobile frontal stiffness/crashworthiness by impact testing. Final technical report. (1976), by M. O. Ryder (page images at HathiTrust)
• Hybrid materials substitution for Oldsmobile Omega X-body components. Final report. (1980), by S. Cross (page images at HathiTrust)
• Update of CRASH II computer model damage tables. Volume I. Final report. (1983), by Michael W. Monk and D. A. Guenther (page images at HathiTrust)
• Update of CRASH II computer model damage tables. Volume II. Final report. (1983), by Michael W. Monk and D. A. Guenther (page images at HathiTrust)
• Side interior stiffness measurement. Final report. (1984), by Donald T. Willke and Michael W. Monk (page images at HathiTrust)
• Crashworthiness, aggressiveness and crash test procedures. Final report. (1985), by T. F. MacLaughlin and Roger A. Saul (page images at HathiTrust)
• Static and dynamic behavior of monotube span-type sign structures. Volume I - final report. (1984), by M. R. Ehsani, S. K. Chakrabarti, and Reidar Bjorhovde (page images at HathiTrust)
• Static and dynamic behavior of monotube span-type sign structures. Volume II - appendices. Final report. (1984), by M. R. Ehsani, S. K. Chakrabarti, and Reidar Bjorhovde (page images at HathiTrust)
• Structural design of roadway shoulders. Final report. (1986), by K. Majidzadeh and George J. Ilves (page images at HathiTrust)
• Vehicle component characterization. Volume I: project results. Final report. (1987), by David J. Segal, Leonard R. Kamholz, and Davis G. Griffith (page images at HathiTrust)
• Vehicle component characterization. Volume II - data appendices. Final report. (1987), by David J. Segal, Leonard R. Kamholz, and Davis G. Griffith (page images at HathiTrust)
• CRASH III model improvements: vehicle categorization for stiffness parameters. Volume 1. Final report. (1987), by Donald T. Willke and Michael W. Monk (page images at HathiTrust)
• CRASH III model improvements: derivation of new side stiffness parameters from crash tests. Volume 2. Final report. (1987), by Donald T. Willke and Michael W. Monk (page images at HathiTrust)
• Quasi static and dynamic roof crush testing. (1998), by Glen C. Rains and M. A. van Voorhis (page images at HathiTrust)
• Bending strength and stiffness of bridge piles after 85 years in the Milwaukee River (Forest Products Laboratory, Forest Service, Forest Products Laboratory, 1974), by B. A. Bendtsen, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust; US access only)
• Bending properties of reinforced and unreinforced spliced nail-laminated posts (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1991), by David R. Bohnhoff and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Corrosion resistance of tantalum, T 111, and Cb-1Zr to mercury at 1200 F (National Aeronautics and Space Administration ;, 1971), by L. B. Engel, R. W. Harrison, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• On the duality between the problems of stretching and of bending of plates (National Aeronautics and Space Administration, 1967), by Z. M. Elias (page images at HathiTrust; US access only)
• Plane-stress analysis of an edge-stiffened rectangualar plate, taking into account bending and shear stiffness of the stiffeners (National Aeronautics and Space Administration, 1968), by Yu-wen Hsu and Charles Libove (page images at HathiTrust; US access only)
• Analysis of large bending deformations of a filamentary tubular shell typical for pressure constraint components of space suits (National Aeronautics and Space Administration ;, 1970), by Odus R. Burggraf and Astro Research Corporation (page images at HathiTrust)
• NASA TR R-166 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1963), by W. Jefferson Stroud, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TR R-186 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1963), by Charles E. May, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-3466 (National Aeronautics and Space Administration ;, 1966), by W. B. Fichter, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-6040 (National Aeronautics and Space Administration :, 1970), by Bernard Gross, Alexander Mendelson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Mechanical properties of advanced gravity gradient booms (National Aeronautics and Space Administration; [for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va.], 1970), by C. L. Staugaitis and R. E. Predmore (page images at HathiTrust; US access only)
• Handbook of structural stability. Supplement to part III, Buckling of curved plates and shells (National Aeronautics and Space Administration, 1959), by George Gerard and New York University (page images at HathiTrust)
• Creep bending and buckling of thin circular cylindrical shells (National Aeronautics and Space Administration, 1960), by Burton Erickson and Polytechnic Institute of Brooklyn (page images at HathiTrust)
• The Lateral stability of equal-flanged aluminum-alloy I-beams subjected to pure bending (National Advisory Committee for Aeronautics ;, 1940), by C. Dumont, H. N. Hill, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Small bending and stretching of sandwich-type shells (National Advisory Committee for Aeronautics, 1949), by Eric Reissner and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stresses in and general instability of monocoque cylinders with cutouts. VII - Experimental investigation of cylinders having either long bottom cutouts or series of side cutouts. (National Advisory Committee for Aeronautics, 1949), by Nicholas J. Hoff, Joseph J. Mele, Bruno A. Boley, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Analytical determination of coupled bending-torsion vibrations of cantilever beams by means of station functions (National Advisory Committee for Aeronautics, 1950), by Alexander Mendelson, Selwyn Gendler, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An Investigation of pure bending in the plastic range when loads are not parallel to a principal plane (National Advisory Committee for Aeronautics, 1951), by Harry A. Williams and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Analytical and experimental investigation of effect of twist on vibrations of cantilever beams (National Advisory Committee for Aeronautics, 1951), by Alexander Mendelson, Selwyn Gendler, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Introduction to electrical-circuit analogies for beam analysis (National Advisory Committee for Aeronautics, 1952), by Stanley U. Benscoter, Richard H. MacNeal, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Bending strength of a large thin-walled pressure-stabilized cylinder beyond onset of compressive skin wrinkling (National Aeronautics and Space Administration ;, 1966), by Robert P. Miller, Theodore Gerus, and Lewis Research Center (page images at HathiTrust)
• Differential equations of motion for combined flapwise bending, chordwise bending, and torsion of twisted nonuniform rotor blades (National Advisory Committee for Aeronautics, 1957), by John C. Houbolt, George W. Brooks, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strength tests on paper cylinders in compression, bending, and shear (National Advisory Committee for Aeronautics ;, 1931), by Richard V. Rhode, Eugene E. Lundquist, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A Numerical approach to the instability problem of monocoque cylinders (National Advisory Committee for Aeronautics, 1951), by Bruno A. Boley, Mayers. J., Josesph Kempner, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• NACA Wartime Reports. Series L. (National Advisory Committee for Aeronautics, 1945), by James P. Peterson, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Bending of circular plates under a variable symmetrical load (Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Bending of circular plates under a uniform load on a concentric circle (Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Non-linear bending and buckling of circular plates (New York, New York : AEC Computing and Applied Mathematics Center, Institute of Mathematical Sciences, New York University, 1958., 1958), by Herbert Bishop Keller, Edward L. Reiss, New York University. Institute of Mathematical Sciences, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Optimality criteria in structural design (Wright-Patterson Air Force Base, Ohio : Air Force Systems Command, Air Force Flight Dynamics Laboratory, United States Air Force, 1971., 1971), by William Prager, Pedro V. Marcal, Air Force Flight Dynamics Laboratory (U.S.), and Brown University. Division of Engineering (page images at HathiTrust)
• Stability of filament wound cylinders under combined loading (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by A. Holston, D. A. Stang, A. Feldman, Air Force Flight Dynamics Laboratory (U.S.), and Martin Marietta Denver Aerospace (page images at HathiTrust)
• The cold bending of metals. (Chicago, 1956), by Wallace Supplies Manufacturing Company (page images at HathiTrust; US access only)

More items available under broader and related terms at left.