The Online Books Page

Online Books by

Albany Metallurgy Research Center (U.S.)

Books from the extended shelves:

• Albany Metallurgy Research Center (U.S.): Beneficiation of Idaho kyanite-bearing materials (U.S. Dept. of Interior, Bureau of Mines, 1973), also by A. R. Rule, R. S. McClain, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Columbium and tantalum alloy development (Bureau of Mines, 1967), also by Herbert R. Babitzke, H. Kato, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Corrosion of commercial alloys in three environments simulating phosphate rock acidulation (U.S. Bureau of Mines, 1974), also by L. L. Oden, Boyd D. Nash, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Dispersion strengthening of internally oxidized iron-aluminum alloys (U.S. Dept. of Interior, Bureau of Mines, 1972), also by Mark I. Copeland, William C. McBee, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Enthalpies and entropies above 298.15⁰ K for copper sulfate and copper oxysulfate (U.S. Dept. of Interior, Bureau of Mines, 1972), also by M. J. Ferrante and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Enthalpy and free energy of formation of vanadium subnitride (VN₀₄̣₆₅), 298° to 1,800° K (Bureau of Mines, 1971), also by L. B. Pankratz, Alla D. Mah, L. L. Oden, H. O. Poppleton, J. M. Stuve, U.S. Atomic Energy Commission, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Enthalpy of formation of malachite [Cu₂(CO₃) (OH)₂] (U.S. Bureau of Mines, 1974), also by Dale W. Richardson, Robert R. Brown, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Evaluation of some solid oxides as sorbents of sulfur dioxide (U.S. Dept. of Interior, Bureau of Mines, 1971), also by J. H. Russell, D. L. Paulson, J. I. Paige, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Flotation of carbonate minerals from unaltered phosphate ores of the Phosphoria formation (U.S. Bureau of Mines, 1974), also by A. R. Rule, Marshall O. Butler, Charles W. Clark, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): High-energy-rate extrusion of low-density tungsten powder billets (Bureau of Mines, 1966), also by Jack G. Croeni, H. Kato, John S. Howe, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): High energy-rate forging and extrusion and the effect on structure and properties (Bureau of Mines, 1966), also by Jack G. Croeni, H. Kato, John S. Howe, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): High-temperature columbium and tantalum alloys (Bureau of Mines, 1966), also by Herbert R. Babitzke, H. Kato, R. E. Siemens, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Improvement of a commercial hypereutectic aluminum-silicon master alloy (Bureau of Mines, 1966), also by R. R. Lowery, H. Kato, Jack G. Croeni, United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Incendivity of some coal-cutter materials by impact-abrasion in air-methane (U.S. Bureau of Mines, 1974), also by Robert Blickensderfer, John E. Kelley, Donald K. Deardorff, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): The K₂HfF₆-K₂ZrF₆-1.25 percent HF system at 40⁰ C with other solubility curves from 25⁰ to 70⁰ C (U.S. Dept. of Interior, Bureau of Mines, 1973), also by S. C. Rhoads and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Liquid state spectral emissivities of titanium, vanadium, zirconium, molybdenum, and platinum in an electron-beam furnace (U.S. Dept. of Interior, Bureau of Mines, 1973), also by R. K. Koch, R. A. Beall, J. L. Hoffman, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Low-temperature heat capacities and high-temperature enthalpies of sodium chromate (U.S. Dept. of Interior, Bureau of Mines, 1972), also by M. J. Ferrante, M. P. Krug, J. M. Stuve, U.S. Atomic Energy Commission, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Low-temperature heat capacity and high-temperature enthalpy of TiA1₃ (U.S. Bureau of Mines, 1974), also by J. M. Stuve, M. J. Ferrante, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Metallurgical progress report (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension., in the 20th century), also by United States Bureau of Mines and U.S. Atomic Energy Commission (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Pioneering experiments on the coreduction of titantium, aluminum, and vanadium chlorides to produce titanium alloy sponge (U.S. Bureau of Mines, 1974), also by Jack L. Henry, John L. Schaller, W. E. Anable, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Preparation of sintered tungsten-25 rhenium and W-Re-Mo alloy sleeves : for the period November 1, 1963, through June 30, 1967 (Albany, Oregon : Bureau of Mines, Albany Metallurgy Research Center, 1969., 1969), also by Gene Asai, C. R. Thomas, United States Bureau of Mines, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Preparation of thorium-magnesium alloys and pure thorium by magnesium reduction of thorium tetrachloride (U.S. Dept. of Interior, Bureau of Mines, 1971), also by Thomas T. Campbell, Frank E. Block, G. B. Robidart, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Recovering copper from mill tailings: selected studies (U.S. Bureau of Mines, 1974), also by J. C. White, T. N. Goff, A. J. Fergus, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Recovery of fluorine from low-grade calcareous fluorspars : preliminary studies (Bureau of Mines, U.S. Dep. of the Interior, 1974), also by A. R. Rule, H. E. Blake, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Reducing copper and tin impurities in ferrous scrap recovered from incinerated municipal refuse (U.S. Dept. of Interior, Bureau of Mines, 1973), also by L. L. Oden, A. D. Fugate, Arnold Adams, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Reducing surface hot shortness of copper-bearing steels (U.S. Dept. of Interior, Bureau of Mines, 1972), also by Mark I. Copeland, J. E. Kelley, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Secondary pig iron from shredded auto scrap (U.S. Dept. of Interior, Bureau of Mines, 1973), also by Jack E. Tress, W. L. Hunter, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Source and control of nitride inclusions in titanium (U.S. Dept. of the Interior, Bureau of Mines, 1974), also by J. L. Schaller, W. E. Anable, S. D. Hill, Jack L. Henry, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Spark-shower radiance of metal grinding sparks (U.S. Bureau of Mines, 1974), also by John E. Kelley, Robert Blickensderfer, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Study of columbium-base alloys (Bureau of Mines, 1967), also by Renpei Yoda, H. Kato, Herbert R. Babitzke, Kinzoku Zairyō Gijutsu Kenkyūjo (Japan), United States Department of the Interior, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Testing of coal-cutter materials for incendivity and radiance of sparks (U.S. Dept. of Interior, Bureau of Mines, 1972), also by M. I. Copeland, D. K. Deardorff, J. E. Kelley, Robert Blickensderfer, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Thermodynamic properties of (Na₂O)₄·Fe₂O₃, 6° to 1,200° K (Bureau of Mines, 1971), also by J. M. Stuve, D. W. Richardson, L. B. Pankratz, United States Department of the Interior, United States Bureau of Mines, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Thermodynamic properties of rhenium oxides, 8 to 1,400 K (Dept. of the Interior, Bureau of Mines, 1976), also by J. M. Stuve, M. J. Ferrante, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Thermodynamic properties of three sodium titanates (U.S. Dept. of Interior, Bureau of Mines, 1973), also by K. O. Bennington, R. R. Brown, and United States Bureau of Mines (page images at HathiTrust)
• Albany Metallurgy Research Center (U.S.): Thermodynamics of the Al-Si system (U.S. Bureau of Mines, 1974), also by Seth C. Schaefer and United States Bureau of Mines (page images at HathiTrust)

See also what's at your library, or elsewhere.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.