Online Books by
University of Minnesota. Department of Aerospace Engineering and Mechanics
Books from the extended shelves:
![[X-Info]](https://onlinebooks.library.upenn.edu/infouc.gif)
University of Minnesota. Department of Aerospace Engineering and Mechanics: Behavior of extraction parachutes in the wake of a powered airplane model (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), also by H. G. Heinrich, G. D. Hulcher, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)- University of Minnesota. Department of Aerospace Engineering and Mechanics: Code validation studies of high-enthalpy flows (Arlington, Virginia. : Air Force Office of Scientific Research, 2006., 2006), also by Graham V. Candler, Ioannis Nompelis, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Design and instrumentation of a water flow channel and application to some aerodynamics problems (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1964., 1964), also by Shukry K. Ibrahim, United States. Air Force. Systems Command, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Drag and stability of cross type parachutes (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), also by R. J. Niccum, Robert Gutenkauf, E. L. Haak, Air Force Flight Dynamics Laboratory (U.S.), and United States. Air Force. Systems Command (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: The drag of cones, plates, and hemispheres in the wake of a forebody in subsonic flow (Wright-Patterson Air Force Base, Ohio : Flight Accessories Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), also by Helmut G. Heinrich, Eugene L. Haak, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Dynamic stability of a parachute point-mass load system (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), also by H. G. Heinrich, L. W. Rust, United States. Air Force. Systems Command. Research and Technology Division, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: The effect of configurational additions using viscoelastic interfaces on the damping of a cantilever beam (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1957), also by James S. Whittier, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Experimental determination of the apparent moment of inertia of parachutes (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), also by Shukry K. Ibrahim, United States. Air Force. Systems Command, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Measurement of displacements in contact-stress experiments (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), also by G. E. Bowie, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Pressure distribution in the wake of two bodies revolution at transonic and supersonic speeds (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), also by Helmut G. Heinrich, R. Sheldon Hess, Wright-Patterson Air Force Base (Ohio), and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Simulation of turbulent hypersonic flows : subgrid-scale model for the temperature fluctuations in reacting turbulence (Bolling Air Force Base, D.C. : Air Force Office of Scientific Research, 1997., 1997), also by Graham V. Candler, M. Pino Martin, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Stability and drag of parachutes with varying effective porosity (Wright-Patterson Air Force Base, Ohio : Flight Accessories Laboratory, Aeronautical Systems Division, Air Force Systems Command, 1962., 1962), also by Helmut G. Heinrich, Eugene L. Haak, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Stress analysis of a parachute during inflation and at steady state (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), also by H. G. Heinrich, Lelan R. Jamison, United States. Air Force. Systems Command, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Stress redistribution in notched specimens under cyclic stress (Wright-Patterson Air Force Base, Ohio, Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), also by A. B. Blatherwick, Byron K. Olson, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Supersonic speed flutter analysis of circular panels with edges elastically restrained against rotation (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1960., 1960), also by L. E. Goodman, Jasti Venkata Rattayya, United States. Wright Air Development Division, and United States. Air Force. Air Research and Development Command (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Transient vibrations of a beam with nonlinear material properties (Wright-Patterson Air Force Base, Ohio : Diretorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), also by P. R. Sethna and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Transients in certain autonomous multiple degree of freedom nonlinear vibrating systems (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), also by P. R. Sethna, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
- University of Minnesota. Department of Aerospace Engineering and Mechanics: Velocity distribution in the wake of bodies of revolution based on drag coefficient (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1963., 1963), also by Helmut G. Heinrich, Donald J. Eckstrom, Wright-Patterson Air Force Base (Ohio), and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
See also what's at your library, or elsewhere.
Help with reading books -- Report a bad link -- Suggest a new listing
Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials
Books -- News -- Features -- Archives -- The Inside Story
Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.