The Online Books Page

Books by Argonne National Laboratory. Metallurgy Division:

Books in the extended shelves:

• Argonne National Laboratory. Metallurgy Division: Analysis of fuel element core blanks for Argonne low power reactor by gamma counting (Argonne National Laboratory, 1959), also by W. J. McGonnagle and R. B. Perry (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Annual progress report for ... : metallurgy division (Argonne National Laboratory, 1965) (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Annual report for ... : metallurgy division (Argonne National Laboratory, in the 20th century) (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Argonne dual neutron diffractometers using a single primary beam (Argonne National Laboratory, 1962), also by John Terandy, S. S. Sidhu, LeRoy Heaton, and Melvin H. Mueller (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: An automatic polishing machine for remote metallography (Argonne National Laboratory, 1959), also by J. L. Armstrong, F. J. Fousek, S. H. Paine, and F. L. Brown (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The calculation of radial temperature distributions in cylindrical fuel specimens during neutron irradiation (Argonne National Laboratory, 1958), also by Frank R. Taraba (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Casting and fabrication of core material for Argonne low power reactor fuel elements (Argonne National Laboratory, 1959), also by R. L. Salley and W. R. Burt (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Casting of a uranium shield for a kilocurie cobalt-60 source (Argonne National Laboratory, 1959), also by R. J. Dunworth and R. E. Macherey (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Ceramic nuclear fuels in the system ZrO2 - CaO - UO2 (Argonne National Laboratory, 1962), also by J. H. Handwerk, D. C. Hill, and G. D. White (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Characteristics of anodic and corrosion films on zirconium (Argonne National Laboratory, 1960), also by R. D. Misch and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Consitution of low carbon Uranium-Carbon alloys (Argonne National Laboratory, 1959), also by Bernhard Blumenthal (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Consolidation and fabrication techniques for vanadium-20 w/o titanium (TV-20) (Argonne National Laboratory, 1965), also by R. M. Mayfield, F. J. Karasek, R. D. McGowan, W. C. Kramer, and W. R. Burt (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Corrosion experiments with 2S aluminum at 200 ⁰C (Argonne National Laboratory, 1956), also by W. E. Ruther (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Corrosion of 1100 aluminum in boiling H20 and D20 (Argonne National Laboratory, 1959), also by J. E. Draley, R. E. Loess, and S. Mori (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Corrosion of aluminum and its alloys in superheated steam (Argonne National Laboratory, 1961), also by J. E. Draley, S. Greenberg, W. E. Ruther, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Corrosion resistance and mechanical properties of aluminum powder products (Argonne National Laboratory, 1959), also by J. E. Draley and W. E. Ruther (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Crevice-galvanic corrosion of aluminum (Argonne National Laboratory, Metallurgy Division, 1966), also by S. Mori, R. E. Loess, Joseph Edward Draley, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Deuterium-hydrogen exchange in boehmite corrosion product formed on pure aluminum in boiling water (Argonne National Laboratory, 1961), also by Yukitoshi Mōri, R. B. Bernstein, J. E. Draley, and Argonne National Laboratory. Chemistry Division (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The development and fabrication of a boron absorption tube for spectrographic analysis (Argonne National Laboratory, 1966), also by J. T. Dusek (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Development and manufacture of fuel, blanket, and thermocouple rods for the Experimental Breeder Reactor I, Core IV (Argonne National Laboratory, 1963), also by A. B. Shuck, R. M. Mayfield, A. G. Hins, W. R. Burt, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Development of brazing techniques and procedures for fabricating fuel subassemblies for the Argonne Advanced Research Reactor (AARR) (Argonne National Laboratory, 1968), also by V. M. Kolba, W. C. Kramer, C. V. Pearson, U.S. Atomic Energy Commission, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Diffusion in gamma uranium : final report--metallurgy program 4.1.27 (Argonne National Laboratory, Metallurgy Division, 1965), also by N. L. Peterson, S. J. Rothman, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The diffusion of gold in gamma uranium (Argonne National Laboratory, 1960), also by S. J. Rothman and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: A double pulse eddy current testing system (Argonne National Laboratory, 1959), also by C. J. Renken and R. G. Myers (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The drip casting of zirconium metal (Argonne National Laboratory, 1960), also by R. J. Dunworth, R. E. Macherey, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The effect of additives on the densification of urania-thoria compositions (Argonne National Laboratory, 1961), also by George D. White and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The effects of irradiation on some binary alloys of thorium-plutonium and zirconium-plutonium (Argonne National Laboratory, 1962), also by J. A. Horak, H. V. Rhude, J. H. Kittel, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The effects of irradiation on uranium-plutonium-fissium fuel alloys (Argonne National Laboratory, 1962), also by J. A. Horak, R. J. Dunworth, J. H. Kittel, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Electrical measurements on the growing scale on zirconium-titanium alloys (Argonne National Laboratory, 1961), also by R. D. Misch, G. W. Iseler, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: An electrical recording dial gage (Argonne National Laboratory, 1949), also by R. F. Plott (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of an irradiated prototype fuel element for the Elk River reactor (Argonne National Laboratory, 1961), also by L. A. Neĭmark (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of irradiated experimental NRU fuel rods (Argonne National Laboratory, 1959), also by S. H. Paine, W. F. Murphy, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of irradiated RaLa source fuel rod (prototype no. 2) for Los Alamos Scientific Laboratory (Argonne National Laboratory, 1963), also by S. H. Paine, F. L. Brown, W. F. Murphy, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of jacketed uranium slugs from the Los Alamos fast reactor "Clementine" (Argonne National Laboratory, 1959), also by S. H. Paine, F. L. Brown, W. F. Murphy, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of uranium-2 w/o zirconium experimental fuel slugs irradiated in EBR-I (Argonne National Laboratory, 1962), also by W. F. Murphy, S. H. Paine, A. C. Klank, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Examination of uranium from the first core of the Experimental Breeder Reactor I (Argonne National Laboratory, 1961), also by W. F. Murphy, S. H. Paine, and A. C. Klank (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The fabrication and testing of depleted uranium blanket slugs for EBR-II (Argonne National Laboratory, Metallurgy Division, 1965), also by W. R. Burt, C. H. Bean, R. D. McGowan, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Fabrication of the fuel and blanket for the Argonne Fast Source Reactor (AFSR) (Argonne National Laboratory, 1963), also by W. R. Burt and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Fast fuel test reactor - : FFTR conceptual design study (Argonne National Laboratory, 1960), also by A. Smaardyk, A. McArthy, J. H. Kittel, H. H. Hummel, R. Brubaker, U.S. Atomic Energy Comission, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Film growth on aluminum in high-temperature water (Argonne National Laboratory, 1961), also by Raymond K. Hart and Westly E. Ruther (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Fuel development for the Transient Reactor Test reactor (Argonne National Laboratory, 1960), also by R. C. Lied and J. H. Handwerk (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Heat capacity studies of uranium and uranium-fissium alloys (Argonne National Laboratory, 1963), also by Howard Savage, Richard D. Seibel, and Denver Research Institute. University of Denver (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: High-temperature sensors for BORAX-V boilng fuel rods (Argonne National Laboratory, 1962), also by E. J. Brooks, R. D. McGowan, W. C. Kramer, U.S. Atomic Energy Comission, and Argonne National Laboratory. Idaho Division (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Instrumented temperature-controlled capsules for irradiations in the Chicago Pile 5 reactor (Argonne National Laboratory, 1962), also by W. N. Beck and R. J. Fousek (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Interdiffusion between Uranium-5 w/o fissium alloy and type 304 stainless steel (Argonne National Laboratory, 1964), also by C. M. Walter (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Investigation of fused-salt processes for the preparation of uranium sulfides (Argonne National Laboratory, Metallurgy Division, 1965), also by D. R. Messier and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Investigations in the system urania-neodymia (Argonne National Laboratory, 1962), also by D. Kolar, R. J. Beals, J. H. Handwerk, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The irradiation of aluminum alloy-clad thoria-urania pellets (Argonne National Laboratory, 1964), also by L. A. Neĭmark and J. H. Kittel (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Irradiation of extrusion-clad uranium-2 w/o zirconium alloy for EBR-1, Mark III (Argonne National Laboratory, 1959), also by J. H. Kittel (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Irradiation of metal-fiber-reinforced thoria-urania (Argonne National Laboratory, 1961), also by L. A. Neĭmark, C.L. Hoenig, and J.H. Kittel (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Irradiation of prototype CP-4 (EBR-1) reactor fuel slugs in the CP-3' goat hole (Argonne National Laboratory, 1958), also by S. H. Paine, W. F. Murphy, and P. J. Persiani (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Lamb waves : their use in nondestructive testing (Argonne National Laboratory, 1963), also by Roberta Ann di Novi (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The manufacture of supplemental depleted fuel rods for Fuel Cycle Facility startup (Argonne National Laboratory, 1963), also by N. J. Carson, A. B. Shuck, and H. F. Jelinek (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The manufacture of the graphite-urania fuel matrix for Transient Reactor Test Facility (Argonne National Laboratory, 1960), also by J. H. Handwerk and R. C. Lied (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: A neutron diffraction study of krypton in the liquid state (Argonne National Laboratory, 1961), also by Glen T Clayton and LeRoy Heaton (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: A neutron-diffraction study of uranyl nitrate hexahydrate (Argonne National Laboratory, 1965), also by J. C. Taylor and M. H. Mueller (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The nondestructive testing of brazed joints (Argonne National Laboratory, 1965), also by Akira Kannō (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Nondestructive testing of EBR-1 Mark III fuel elements and components (Argonne National Laboratory, 1959), also by W. J. McGonnagle, R. G. Myers, C. J. Renken, W. N. Beck, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Nondestructive tests of components of EBR-I, CORE IV (Argonne National Laboratory, 1963), also by K. Balaramamoorthy, R. B. Perry, C. J. Renken, R. H. Slener, and India Atomic Energy Establishment. Bombay 1 (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: On the possibilities for thermal neutron image intensification (Argonne National Laboratory, 1964), also by Harold Berger (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: On the theory of migration and coalescence of bubbles in solids (Argonne National Laboratory, Metallurgy Division, 1965), also by E. E. Gruber and U.S. Atomic Energy Commission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: "Pin-cushion" irradiation tests of uranium-chromium alloys (Argonne National Laboratory, 1958), also by S. H. Paine and F. L. Brown (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: A pinhole camera autoradiographic technique for encapsulated irradiated fuel specimens (Argonne National Laboratory, 1962), also by W. N. Beck (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Preferred orientation in rolled and in recrystallized high-purity uranium rod (Argonne National Laboratory, 1959), also by M. H. Mueller and H. W. Knott (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Preparation of magnesium oxide refractories (Argonne National Laboratory, 1960), also by R. C. Lied (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Program for the location of Fourier peak centers (Argonne National Laboratory, 1963), also by M. H. Mueller, S. H. Simonsen, Fred Clark, University of Texas, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Progress report on nondestructive testing by electromagnetic methods (Argonne National Laboratory, 1962), also by C. J. Renken (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Quarterly report (Argonne National Laboratory, in the 1950s) (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The radial distribution of thermal neutron flux in cylindrical fuel specimens during neutron irradiation (Argonne National Laboratory, 1959), also by Frank R. Taraba and S. Hugh Paine (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Recrystallization of deformed alpha-uranium single crystals (Argonne National Laboratory, 1959), also by L. T. Lloyd (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Recrystallization of heavily cold-rolled uranium sheet (Argonne National Laboratory, 1959), also by W. R. Yario and L. T. Lloyd (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Room-temperature lattice constants of alpha uranium-plutonium alloys (Argonne National Laboratory, 1962), also by A. F. Berndt (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Scale-up of high-purity uranium production (Argonne National Laboratory, 1961), also by G. B. O'Keeffe and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Selection of the structural material for the Fast Reactor Test liquid-metal systems (Argonne National Laboratory, 1964), also by L. R. Kelman and R. J. Dunworth (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Self-diffusion in beta uranium (Argonne National Laboratory, 1960), also by A. L. Harkness, J. P. Hughes, J. Gray, S. J. Rothman, U.S. Atomic Energy Comission, Argonne National Laboratory. Special Materials Department, and Argonne National Laboratory. Chemistry Division (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Self-diffusion in gamma uranium (Argonne National Laboratory, 1959), also by A. L. Harkness, R. Weil, L. T. Lloyd, and S. J. Rothman (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: A seminar on groups v and vi anions (Argonne National Laboratory, 1964), also by Ill.) Seminar on Groups V and VI (1964 : Argonne, J. F. Schumar, J. H. Handwerk, R. J. Beals, and Associated Midwest Universities (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Status report in eddy current : theory and application (Argonne National Laboratory, 1958), also by C. J. Renken, W. J. McGonnagle, and R. G. Myers (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Structures and properties of uranium-fissium alloys (Argonne National Laboratory, 1961), also by S. T. Zegler, M. V. Nevitt, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Studies of the hydrogen damage mechanism in the corrosion of zirconium (Argonne National Laboratory, 1961), also by R. D. Misch (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Swelling of uranium and uranium alloys on post-irradiation annealing (Argonne National Laboratory, 1962), also by B. A. Loomis and D. W. Pracht (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Thermal expansion of alpha-uranium single crystals (Argonne National Laboratory, 1959), also by L. T. Lloyd (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: Thoria and thoria-urania reinforced by metal fibers (Argonne National Laboratory, 1962), also by Y. Baskin and J. H. Handwerk (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The transformation temperatures of high-purity uranium (Argonne National Laboratory, 1960), also by B. Blumenthal, L. T. Lloyd, and J. E. Baumrucker (page images at HathiTrust)
• Argonne National Laboratory. Metallurgy Division: The Zr2 - CaO - UO2 ceramic fuel fabrication for the EBWR spiked core elements (Argonne National Laboratory, 1961), also by R. C. Lied, J. H. Handwerk, and E. D. Lynch (page images at HathiTrust)

Find more by Argonne National Laboratory. Metallurgy Division at your library, or elsewhere.