The Online Books Page

Books by Stan J. Paprocki:

Books in the extended shelves:

• Paprocki, Stan J.: The bonding of molybdenum- and niobium-clad fuel elements (Battelle Memorial Institute ;, 1960), also by Paul J. Gripshover, Edwin S. Hodge, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: The chemical reactions of PuO₂ with reactor materials (Battelle Memorial Institute, 1962), also by William M. Pardue, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Cladding UO₂ with beryllium by gas-pressure bonding (Battelle Memorial Institute ;, 1962), also by Glenn R. Goetsch, James H. Peterson, H. D. Hanes, Edwin S. Hodge, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Paprocki, Stan J.: Development of uranium nitride-stainless steel dispersion fuel elements (Battelle Memorial Institute ;, 1959), also by Andrew K. Foulds, G. W. Cunningham, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Fabrication and irradiation of SM-2 core materials (Battelle Memorial Institute ;, 1961), also by Donald E. Lozier, William E. Murr, G. W. Cunningham, Ronald F. Dickerson, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Further development of gas-pressure bonding of zircaloy-clad flat-plate uranium dioxide fuel elements (Battelle Memorial Institute ;, 1960), also by Donald C. Carmichael, Paul J. Gripshover, Edwin G. Wintucky, Edwin H. Layer, Edwin S. Hodge, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Gas-pressure bonding of flat-plate fuel assemblies (Battelle Memorial Institute ;, 1959), also by Ralph W. Getz, Charles B. Boyer, Edwin S. Hodge, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Gas-pressure bonding of stainless steel-clad UO₂ flat-plate elements (Battelle Memorial Institute ;, 1962), also by Charles B. Boyer, Edwin S. Hodge, Stanley W. Porembka, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Paprocki, Stan J.: Gas-pressure bonding of zircaloy-clad flat-plate uranium dioxide fuel elements (Battelle Memorial Institute ;, 1959), also by Paul J. Gripshover, Donald C. Carmichael, Edwin S. Hodge, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Incorporation of a boron burnable poison and spherical UO₂ in SM-2 stainless-matrix fuel plates (Battelle Memorial Institute ;, 1961), also by Andrew K. Foulds, G. W. Cunningham, D. L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Investigation of some niobium-base alloys (Battelle Memorial Institute, 1956), also by John T. Stacy, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Joining zircaloy-stainless steel and SAP alloys by friction, rolling and explosive techniques (Battelle Memorial Institute ;, 1962), also by Ronald J. Carlson, Stanley W. Porembka, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Preliminary studies of bonding of beryllium-clad UO₂ fuel elements (Battelle Memorial Institute ;, 1961), also by James S. Perrin, Edwin S. Hodge, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Preparation and properties of UO₂ cermet fuels (Battelle Memorial Institute ;, 1960), also by Donald E. Kizer, G. W. Cunningham, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Process development for making SM-1 instrumented fuel plates by gas-pressure bonding (Columbus, Ohio : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1961], 1961), also by Smith Edward G., Charles B. Boyer, G. W. Cunningham, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress on the use of gas-pressure bonding for fabricating low-cost ceramic, cermet, and dispersion fuels : phase I report on AEC Fuel-Cycle Program (Battelle Memorial Institute ;, 1959), also by Donald L. Keller, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Paprocki, Stan J.: Progress on the use of gas-pressure bonding for fabricating low-cost ceramic, cermet, and dispersion fuels : phase II report on AEC Fuel-Cycle Program (Battelle Memorial Institute ;, 1960), also by Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress on the use of gas-pressure bonding for fabricating low-cost ceramic, cermet, and dispersion fuels : final report on AEC Fuel-Cycle Program (Battelle Memorial Institute ;, 1961), also by Stanley W. Porembka, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress relating to civilian applications during December, 1964 (Battelle Memorial Institute ;, 1965), also by Russell W. Dayton and Columbus Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress relating to civilian applications during February, 1965 (Battelle Memorial Institute ;, 1965), also by Russell W. Dayton and Columbus Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress relating to civilian applications during January, 1965 (Battelle Memorial Institute ;, 1965), also by Russell W. Dayton and Columbus Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Progress relating to civilian applications during November, 1964 (Battelle Memorial Institute ;, 1964), also by Russell W. Dayton and Columbus Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Properties of uranium dioxide-stainless steel dispersion fuel plates (Battelle Memorial Institute ;, 1959), also by Joseph M. Fackelmann, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: Study of experimental fuel bodies made from alumina-coated UO₂ particles (Battelle Memorial Institute ;, 1962), also by William M. Pardue, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: A theoretical study of the rotary sizing of uranium tube (Battelle Memorial Institute ;, 1962), also by Edward G. Bodine, Edward G. Smith, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Paprocki, Stan J.: The volatility of PuO₂ in nonreducing atmospheres (Battelle Memorial Institute, 1962), also by Wililam M. Pardue, Carl A. Alexander, D. L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)

Find more by Stan J. Paprocki at your library, or elsewhere.