The Online Books Page

Phillips Petroleum Company. Atomic Energy Division

More about Phillips Petroleum Company. Atomic Energy Division:

Books by Phillips Petroleum Company. Atomic Energy Division:

Books in the extended shelves:

Phillips Petroleum Company. Atomic Energy Division: 1024 channel time-of-flight analyzer for MTR fast chopper : operating manual (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by F. L. Petree and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: 1963 AEC-contractors nuclear materials management meeting : Idaho Falls, Idaho, October 16-18, 1963 (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Idaho) AEC-Contractor Nuclear Materials Management Meeting (9th : 1963 : Idaho Falls and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A 4096 channel two-dimensional analyzer for the MTR velocity selector (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by F. L. Petree and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Addendum to Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by L. H. Jones and L. H. Jones (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Addendum to the SPERT III hazards summary report : low-enrichment oxide core (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by J. E. Houghtaling, J. C. Haire, J. A. Norbert, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Addendum to the Spert IV hazards summary report : capsule driver core (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by R. W. Miller, T. F. Lagier, Richard K. McCardell, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Additional measurements of the reactivity transient in irradiated thorium (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Robert G. Nisle, Dean A. Millsap, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The adsorption of ruthenium from nitric acid-air mixtures (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by D. A. Hanson, K. L. Rohde, B. J. Newby, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The advanced reactivity measurement facilities : a description and performance evaluation (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by Earl E. Burdick, D. W. Knight, E. Fast, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The Advanced test reactor (ATR) : final conceptual design (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by D. R. DeBoisblanc and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Advanced test reactor critical facility safety analysis report (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by E. E. Burdick, J. W. Henscheid, Earl E. Burdick, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The age in beryllium--water mixtures (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Air lift performance at low liquid rates using oversized piping and lateral runs (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by H. V. Chamberlain, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Amperometric determination of tin with cupferron (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by Stanley S. Yamamura, Glenn L. Booman, James E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analog solution of a model of the sources of elutriatable fines in the fluidized bed calcination process (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Earl S. Grimmett, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An analysis of a reactivity transient in irradiated thorium (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Robert G. Nisle (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analysis of fast transient reactivity effects in the Spert I water-moderated, UO₂-fueled core (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by A. H. Spano, J. E. Houghtaling, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An analysis of nonboiling reactivity feedback mechanisms in pressurized power excursions in the SPERT III reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Richard W. Garner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analysis of self-shutdown behavior in the SPERT I reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by S. G. Forbes and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An analysis of the accuracy of perturbation theory (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An analysis of the inherent stability of the EOCR (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by S. R. Gossmann and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analytical Control Laboratory operating manual (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by M. J. Painter, George A. Huff, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analytical program for processing aluminum-uranium reactor fuel elements (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Ralph C. Shank, James E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analytical program for processing aluminum-uranium reactor fuel elements (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by James E. Rein, Ralph C. Shank, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Analytical program for processing stainless steel uranium dioxide reactor fuel elements (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by George A. Huff and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Annual progress report ... : Health and Safety Division. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Annual progress report on fuel element development for FY ... . (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Annual progress report on reactor fuels and materials development for ... . (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Annual report of Division Analytical Branch for ... . (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Annual report of Idaho Chemical Processing Plant Analytical Section for ... . (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Apparatus for remote, small scale, liquid-liquid extractions (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Fred W. Dykes, Richard G. Masterson, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Apparatus for remote volumetric titrimetry (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Fred W. Dykes, James E. Rein, Richard G. Masterson, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Application of tube-flow dissolver theory to data from a 2-inch, continuous flooded dissolver (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by E. E. Erickson and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ARCO process definition and scoping studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by E. M. Vander Wall, D. L. Bauer, H. T. Hahn, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant. Chemical Development Branch (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ARMF II regulating rod readout and shim rod drive and position display (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. I. Little and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Atomic energy in retrospect and prospect (U.S. Atomic Energy Commission, Idaho Operations Office, 1953), also by R. L. Doan and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Attrition test on calcined Idaho Chemical Processing Plant waste (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by Paul N. Kelly and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Average thermal neutron flux from bismuth monitor (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by C. H. Hogg (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Barium fluozirconate precipitation from hydrofluoric acid : zirconium fuel reprocessing solutions. Part II, Fission product behavior (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by B. J. Newby and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Barium fluozirconate precipitation from hydrofluoric acid : zirconium fuel reprocessing solutions. Part I, Process chemistry (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by B. E. Paige and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Behavior of the Xe concentration in the MTR after a power reduction (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A bench-scale natural-recirculation dissolver (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by E. E. Erickson, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: "Bulk parameters" for MTR (U.S. Atomic Energy Commission, Technical Information Service, 1952), also by George H. Hanson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels : 1963 annual progress report (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. E. Rein, W. J. Maeck, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels : 1964 annual report (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by W. J. Maeck, J. E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels ... annual report. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels : Progress report -- Calendar year 1962 (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1963., 1963), also by J. E. Rein, B. F. Rider, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels project report for the quarter ... . (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Burnup determination of nuclear fuels : project report for the quarter January 1-March 31, 1965 (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by W. J. Maeck, J. E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calcination of aluminum-type reactor fuel wastes in a fluidized bed (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by E. S. Grimmett and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculated efficiencies of cylindrical radiation detectors (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by Stanley H. Vegors, R. L. Heath, and Louis L. Marsden (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculated surface temperatures for nuclear systems and analysis of their uncertainties : the first report of the Heat Transfer Subcommittee of the Phillips Reactor Safeguard Committee (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. J. Nertney (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation and measurement of the reactor describing function (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Arthur Allen Wasserman and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation and measurement of the transient temperature in a low-enrichment UO₂ fuel rod during large power excursions (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. E. Houghtaling, A. H. Spano, T. M. Quigley, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation of departure from nucleate boiling conditions for the Special Power Excursion Reactor Test III reactor in the high pressure region (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. Dugone and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation of isotope production by the cyclic irradiation of thorium (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Robert G. Nisle (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation of materials testing reactor fuel charges (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry, Ronald Wayne Goin, and Gail Allan Cazier (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation of the composition of reactor-irradiated heavy nuclides (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by R. P. Schuman and R. L. Tromp (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculation of the vibrational frequencies of ethylene (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Ronald Wayne Goin and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Calculations of reactivity behavior during SPERT-I transients (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. W. Miller (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Capacity test data for the adsorption of volatile ruthenium on silica gel (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by D. Richard Anderson, D. W. Rhodes, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Catalyzed dissolution of uranium dioxide in lead chloride-chlorine systems (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by E. M. Vander Wall, H. T. Hahn, D. L. Bauer, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Cesium removal from acidic radioactive waste solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by M. W. Wilding, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Characterization of surfactants in aluminum-uranium fuel reprocessing solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by R. D. Cannon and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Chemical dosimetry at the materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by S. D. Reeder, N. P. Alley, and J. A. Dunbar (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Chemical processing instrumentation and control research program (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Harry Schneider and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Chemical processing technology quarterly progress report. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 20th century), also by U.S. Atomic Energy Commission. Idaho Operations Office and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Chempup performance for high temperature organic service (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. G. Young and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Co-removal of fission products in the electrolytic separation of iron, chromium, and nickel at a dropping mercury electrode (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Kenneth T. Faler, D. Richard Anderson, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant. Chemical Development Branch (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Cobalt-60 production reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by D. R. DeBoisblanc and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Comparative boron isotopic analysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Paul Goris, R. A. Nielsen, T. D. Morgan, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Comparison of flux and power distributions, and void and temperature coefficients of the MTR with U²³⁵ and Pu²³⁹ fuel (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by B. W. Johnson and H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Comparison of the prompt fission gamma spectrum of U-233 induced by thermal neutrons and by 1.8 eV resonance neutrons (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by M. S. Moore, R. R. Spencer, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A comparison of various calcination processes for processing high-level radioactive wastes (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by B. R. Wheeler, J. A. McBride, J. A. Buckham, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Compilation of Egelstaff scattering law curves (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Robert M. Brugger and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Compilation of reduced slow neutron partial differential scattering cross sections (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Robert M. Brugger and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Computer generation and testing of random numbers (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. J. Gannon, L. A. Schmittroth, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Conceptual study of a system for radioactive demonstration of the chop-leach process (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. A. Buckham, R. G. Pitkin, R. S. P'Pool, Vitro Engineering Company, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Containment of iodine-131 released by the RaLa process (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by G. K. Cederberg, D. K. MacQueen, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Contour diagrams of thermal neutron absorption cross sections (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by John E. Evans (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Coordinates for calculating vibrational frequencies in chain molecules (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by H. L. McMurry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Coordinates for semi-rigid molecules (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by H. L. McMurry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Core power variation and fuel burnup in the engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by L. J. Harrison (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion evaluation of stainless steels exposed in ICPP high-level radioactive waste tanks (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by T. L. Hoffman, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion in neutralized radioactive waste (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by N. D. Stolica, G. S. Adams, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant. Chemical Development Branch (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion of alloys in various Idaho Chemical Processing Plant decontamination solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1961), also by T. L. Hoffman, G. S. Adams, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion of type 316 ELC stainless steel in fluoride-bearing zirconium process wastes (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by T. L. Hoffman, C. M. Slansky, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion of type 316 stainless steel in NaK service : a literature survey (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by C. A. Zimmerman, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Corrosion tests in molten lead-lead chloride (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by N. D. Stolica, M. R. Bomar, G. S. Adams, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Coulometric determination of uranium (VI) at controlled potential (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Glenn L. Booman, James E. Rein, Wayne B. Holbrook, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A critical assembly having maximum sensitivity (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Critical loading and initial static experiments in the SPERT II reactor with a close-packed D₂O-moderated core (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. A. McClure, R. L. Johnson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Critical path scheduling of Engineering Test Reactor and Materials Testing Reactor reactor shutdowns (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by R. T. Jacobs, L. L. Myers, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Damage to stainless steel fuel in Special Power Excursion Reactor Test reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by R. E. Heffner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Data analysis techniques for gamma-ray scintillation spectrometry (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by R. L. Heath and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Debye characteristic temperatures : table and bibliography (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by M. W. Holm (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Decontamination of radioactive effluent with clinoptilolite (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by D. W. Rhodes, M. W. Wilding, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Densities of ammonium fluoride-ammonium nitrate-ammonium hexafluozirconate solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by J. L. Teague, D. P. Pearson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The dependence of reactor behavior on the self-shutdown mode (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by S. G. Forbes and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Design and development of a fuel plate surface thermocouple for special power excursion reactor tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Warren H. Giedt, D. L. Rall, and Detroit Controls Corporation (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Design bases for ICPP waste calcination facility (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by D. K. MacQueen, J. I. Stevens, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The design, installation, and testing of the gas-cooled reactor UO₂ irradiation experiment at the NRTS (Idaho Operations Office, U.S. Atomic Energy Commission, 1961), also by E. H. Porter, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The design of a dynamic corrosion and chemical control test loop and preliminary out-of-pile test results (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by W. F. Zelezny, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The design of a potentiostat for electrochemical research (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. H. Brown and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Design of an automatic foil counting data system (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by R. I. Little and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Detector efficiency of continuous air monitor having the filter coaxial with the detector (Idaho Operations Office, U.S. Atomic Energy Commission, 1964), also by E. A. King, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of aluminum in presence of fluoride, zirconium, and uranium (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by Bernice E. Paige, James E. Rein, Maxine C. Elliott, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of boron in aluminum-uranium fuel elements (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by James E. Rein, Glenn L. Booman, James A. Merrill, Kenneth W. Puphal, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The determination of excessive emulsification by coalescence behavior measurements (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by O. W. Parrett and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of fission product iodine : cation exchange purification, heterogeneous isotopic exchange (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by William J. Maeck, James E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of free acid in the presence of hydrolyzable ions (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by James E. Rein, Fred O. Cartan, Robert B. Kimball, Maxine C. Elliott, Glenn L. Booman, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of heavy water purity by infrared absorption (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by R. M. Abernathey, T. D. Morgan, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of picric acid and mononitrophenols in ICPP process solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Stanley S. Yamamura, John H. Sikes, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of small amounts of chloride in high nickel-chromium-iron solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Kenneth W. Puphal, James E. Rein, Glenn L. Booman, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of total fission product molybdenum technetium, and tellurium in ICPP waste tanks (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by William J. Maeck, Stanley S. Yamamura, Fred W. Dykes, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The determination of U²³⁵ burn-out in fuel rods (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by M. W. Holm (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of uranium in irradiated thorium (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Bernice E. Paige, James E. Rein, Paul Goris, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Determination of uranium in solution by x-ray spectrometry (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Harry M. Wilson and G. V. Wheeler (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The determinationof small amounts of hexone in aqueous uranium solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1954), also by Bernice E. Paige, James E. Rein, H. Sigman, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of a fluidized bed calcination process for aluminum nitrate wastes in a two-foot-square pilot plant calciner. Part I. Equipment development and initial process studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by B. P. Brown, J. A. Buckham, E. S. Grimmett, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of a fluidized bed calcination process for aluminum nitrate wastes in a two-foot-square pilot plant calciner. Part II. Factors affecting the intra-particle porosity of alumina (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by B. R. Wheeler, J. A. Buckham, E. S. Grimmett, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of a fluidized bed calcination process for aluminum nitrate wastes in a two-foot-square pilot plant calciner. Part III. Intermediate process studies--runs 11 through 22 (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by B. P. Brown, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of a fluidized bed calcination process for aluminum nitrate wastes in a two-foot-square pilot plant calciner. Part IV. Final process studies--runs 23 through 37 (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by B. P. Brown, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of air distributor caps for a fluidized bed (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. C. Petrie, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of fluidized bed calcination of aluminum nitrate wastes in the waste calcining facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by L. T. Lakey, W. P. Palica, G. E. Lohse, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of general relationships for a tube-flow flooded dissolver (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by E. E. Erickson and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Development of general tank-flow relationships with application to pilot plant data for a flooded column dissolver (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by E. E. Erickson and U. S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Differential scattering cross sections of moderators in the short collision time approximation. Part I, Theoretical (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by H. L. McMurry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Diffusion in the stabilized zirconia-urania system (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by D. R. Mash, Reese S. Kern, K. K. Ikeuye, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dimensional stability of irradiated thorium (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by J. B. Burnham and M. H. Bartz (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The dissolution of iron and nickel in dilute aqua regia (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Richard Douglas Cannon, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dissolution of zirconium alloys in lead chloride (Phillips Petroleum Company, Atomic Energy Division ; Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by H. T. Hahn, E. M. Vander Wall, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dissolution of zirconium and zircaloy-2 in nitric-hydrofluoric acid mixtures at reflux temperatures (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), also by E. M. Vander Wall, D. L. Bauer, Elizabeth M. Whitener, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Distribution of U²³³ in an irradiated thorium slug (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Robert G. Nisle and E. Fast (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Distribution of uranium at low acid : low uranium concentrations into 4-1/2 percent TBP-AMSCO (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Robert L. Andelin, W. H. McVey, Edward L. Anderson, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Distributions of neutron density and neutron flux (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by W. B. Lewis and G. D. Marshall (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Doppler broadening of the low energy total neutron cross section of Pu-241 (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by O. D. Simpson, N. H. Marshall, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Doppler broadening of the total, fission, capture, and scattering neutron cross sections of Pu-241 (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by N. H. Marshall, O. D. Simpson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Double P-1 spherical harmonics approximation in slab geometry (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Dale Robert Metcalf and Gail Allan Cazier (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dry collection and disposition of solids from fluidized bed off-gas (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. C. Petrie, D. E. Black, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dynamic pressure measurement devices in nuclear reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by P. H. Hofhine and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Dynamic properties of heterogeneous water reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by S. G. Forbes, Warren E. Nyer, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An economic evaluation of ultimate disposal of liquid radioactive wastes by the fluidized bed calcination process (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. I. Stevens, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Economically optimum sweepdown criterion for chemical processing (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by Fred H. Tingey and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: EDP procedures in technical library operations. (Atomic Energy Division, Phillips Petroleum Co. [for] U.S. Atomic EnergyCommission, Idaho Operations Office; [available from Office of Technical Services, Dept. of Commerce], 1963), also by Hillis L. Griffin and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect of alloying constituents on aluminum dissolution rates (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. D. Fletcher, H. R. Beard, M. E. Jacobson, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect of dissolved stainless steel components on vapor-liquid equilibria in aqua-regia (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by Bernice E. Paige and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect of geometrical shape on the continuous dissolution of aluminum in mercury catalyzed nitric acid (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by A. F. Boeglin, J. A. Buckham, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The effect of radiation and nitric acid-nitrate salt solution on some non-metallic materials (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by L. A. Decker, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect of recirculation of dissolver effluent on the continuous dissolution of aluminum in mercury-catalyzed nitric acid (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. H. Ray, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The effect of silicon in the reprocessing of a uranium aluminum alloy (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by K. L. Rohde, O. W. Parrett, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect of zirconium nitrate and nitric acid upon the chemical stability of tributyl phosphate (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. J. Moffat, R. D. Thompson, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effect on flux of a fuel plate in reflector (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by J. W. Webster and H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effectiveness of various solutions for decontaminating stainless steel, lead and glass (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by John B. Huff and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effects of gamma radiation on reactivity measurements in the reactivity measurement facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by D. G. Proctor, G. K. Wachs, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The effects of pressure and flow on room temperature power excursions in SPERT III (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by C. R. Toole and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Effects of transient nuclear radiation on transducers and electrical cables (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by F. D. Terry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An eight input adapter for a CN-1024/211 time of flight analyzer (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. I. Little, E. P. Elkins, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An electrochemical cell noise study (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. H. Brown, S. J. Horn, L. G. Cloud, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrodecontamination of metals (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by John B. Huff and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrolytic dissolution of nuclear fuels. Part I, Zirconium in HCl-methanol (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by J. R. Aylward, H. T. Hahn, Elizabeth M. Whitener, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrolytic dissolution of nuclear fuels. Part II, Nichrome in nitrate solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by J. R. Aylward, Elizabeth M. Whitener, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrolytic dissolution of nuclear fuels. Part III, Stainless steel (304) in nitrate solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. R. Aylward, Elizabeth M. Whitener, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrolytic dissolution of nuclear fuels with alternating current (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by F. M. Warzel, J. B. Colson, K. F. Smith, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrolytic oxidation of zirconium in nitrate solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by M. R. Bomar, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Electrostatic precipitation of submicron alumina particles (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by E. Hylsky and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An engineering description of the SPERT-I reactor facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by T. R. Wilson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering liaison for Materials testing reactor-Engineering test reactor experiments : standard practices manual (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. J. Nertney (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An engineering test program to investigate a loss of coolant accident (Idaho Operations Office, U.S. Atomic Energy Commission, 1964), also by T. R. Wilson, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor core hydraulics (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. G. Beck, J. H. Rainwater, and E. S. Brown (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor critical facility control system manual (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by F. A. Meichle, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The Engineering test reactor critical facility hazards summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by D. R. DeBoisblanc (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor cycle 18 thermal and fast neutron flux measurements (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by L. D. Weber and Calvin H. Hogg (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering Test Reactor fast neutron flux measurements 0 > 1 Mev (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Calvin H. Hogg and L. D. Weber (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An engineering test reactor for the MTR site : (a preliminary study) (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by R. M. Jones and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor hazard analysis of the KAPL-F10 experiment (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. J. Flygare, R. J. Nertney, and F. L. McMillan (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor nuclear instrumentation : final report (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), also by D. C. Hanson and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor project. Part I, Completion report, design May 19, 1955 - May 31, 1957, construction and inspection, October 6, 1955 - August 31, 1957. Part II, Final cost report (U.S. Atomic Energy Commission, Technical Information Service Extension ;, 1957), also by Kaiser Engineers, United States. Department of Commerce. Office of Technical Services, and U.S. Atomic Energy Commission. Technical Information Service Extension (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering test reactor radiation damage surveillance programs (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by M. J. Graber, J. H. Ronsick, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering Test Reactor thermal neutron flux measurements (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by L. D. Weber and Calvin H. Hogg (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Engineering Testing Reactor gamma heat generation measurements for cycles 27, 33, and 34 (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by L. D. Weber, Calvin H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Error propagation in the hot channel-hot spot analysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Fred H. Tingey (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Estimate of the heat generation and distribution in the materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by Robert A. Grimesey (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Estimated unit cost of cobalt from a cobalt-60 production reactor (Idaho Operations Office, United States Atomic Energy Commission, 1957), also by U.S. Atomic Energy Commission. Idaho Operations Office and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ETR fast neutron flux measurements for cycle 27 (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by L. D. Weber, C. H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ETR flux measurements for cycles 51B and 54 (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. D. Weber and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ETR thermal neutron flux measurements for cycle 27 (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by L. D. Weber, Calvin H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An evaluation of four processes for recovering uranium from zirconium fuels at the Idaho Chemical Processing Plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by P. Burn, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Evaluation of fuel loadings and cycle times for the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by C. F. Leyse (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Evaluation of radiation stabilizers for terphenyl by high-temperature electron irradiation (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by H. A. Hartzfeld, R. B. Regier, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Evaluation of surfaced-attached thermocouples dduring forced convection heat transfer (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Edward Richard Oetken and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An evaluation of the Krieger-Nelkin method from calculations of slow neutron scattering by CH₄ (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by H. L. McMurry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Evaluation of the metal-to-metal contact basket-type electrolytic dissolver (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by H. T. Hahn, M. R. Bomar, J. R. Aylward, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experience of handling low level active liquid wastes at the Idaho Chemical Processing Plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by S. F. Fairbourne, B. R. Kramer, D. G. Reid, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experience with thulium radiography at the materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by S. D. Reeder (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental and analytical reactivity studies of clean critical stainless steel cores (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. H. Spano and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental and theoretical values of the gamma decay dose rate and heating from spent Materials testing reactor fuel elements (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by W. C. Francis, L. L. Marsden, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental investigations of reactor transients (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by T. R. Wilson, F. Schroeder, G. O. Bright, F. L. Bentzen, S. G. Forbes, Warren E. Nyer, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental measurements of the fission cross section of Pu²⁴¹ (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by T. Watanabe and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental Organic Cooled Reactor control rod and driver fuel hydraulic tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by L. J. Harrison, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental Organic Cooled Reactor control rod latch reliability test (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by E. Burroughs, S. Cohen, U.S. Atomic Energy Commission, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental organic cooled reactor : safety analysis report. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 1960s), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Experimental results of potentially destructive reactivity additions to an oxide core (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. E. Barry, J. E. Grund, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An extraction, controlled-potential coulometric method specific for uranium (VI) (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by Glenn L. Booman, Wayne B. Holbrook, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Extraction, direct spectrophotometric method specific for large amounts of uranium (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by James E. Rein, Maxine C. Elliott, Glenn L. Booman, William J. Maeck, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Extraction, spectrophotometric method specific for microgram amounts of uranium (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by James E. Rein, Maxine C. Elliott, William J. Maeck, Glenn L. Booman, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Extrapolated charge life from ingrowth of Xe¹³⁵ (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry and Gail Allan Cazier (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Factors affecting capacity of air lifts (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by H. V. Chamberlain and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Failure of WAPD-30 high pressure loop (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by M. S. Robinson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fast neutron spectrum code for the IBM-650 (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by Robert A. Grimesey, L. J. Gannon, Frank Edward Mullin, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Feasibility and conceptual design for the step loss of coolant facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by T. R. Wilson, G. B. Matheney, O. M. Hauge, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Field evaluation and control of personnel behavior (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by R. J. Nertney, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Final report on decomposition of nitrous oxide (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by J. H. Zufall, H. S. Miller, Idaho National Reactor Testing Station, and Air Reduction Company (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Finite representations of Bessel functions (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by D. D. Dix (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fission product monitoring in reactor coolant streams (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by R. L. Heath and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fission product ruthenium volatility in a high temperature process (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by B. D. Withers, B. J. Newby, K. L. Rohde, Charles E. May, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Flat vertical power distribution for the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A four-region, two-group calculation of SPERT III critical size and flux distribution (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Dale Robert Metcalf and V. C. Kobold (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fuel burnup determinations by gamma-ray scanning (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by S. G. Forbes (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fuel element flow blockage in the engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by F. R. Keller, J. H. Ronsick, W. S. Little, U.S. Atomic Energy Commission, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fuel plate experience during the SPERT I destructive test series with an aluminum-clad, plate-type core (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. Dugone, D. D. Wieland, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fuel plate resistance thermometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. H. Meservey and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fuel rod experience during the Spert I destructive test series with a stainless steel clad, rod-type core (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by J. Dugone, D. D. Wieland, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Fundamentals in the operation of nuclear test reactors. Vol. 1, Reactor science and technology. (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Gamma damage to ethylene glycol in Materials testing reactor 90-day cooled fuel element shipment (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by F. R. Keller (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Gamma heat generation in the engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Calvin H. Hogg, M. W. Echo, and L. D. Weber (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Gamma heating measurements in the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by C. H. Hogg (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Gamma intensities in the MTR gamma irradiation facility (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by T. R. Wilson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Gamma-ray dosage rate measurement (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by C. H. Hogg (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A gelatin-filtration headend for fuel reprocessing solutions from silicon-containing aluminum alloys (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by B. J. Newby, Bernice E. Paige, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The generation of poisson time distributed random pulses (Phillips Petroleum Company, Atomic Energy Division :, 1962), also by Ned Wilde and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Graphite damage as an index to the integrated damaging neutron flux (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by E. Fast (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Hafnium and zirconium total cross-section measurements (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service, 1954., 1954), also by E. G. Joki, J. E. Evans, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Hazards evaluation of proposed site for Engineering Test Reactor II (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by D. R. DeBoisblanc, L. H. Jones, R. J. Nertney, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: HEAT 1 : a one dimensional time dependent or steady state heat conduction code for the IBM-650 (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. J. Wagner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Heat exchanger tube failures in the ETR (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by O. M. Hauge, G. W. Gibson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Heat generation within the thermal shields and vessel wall of the SPERT-III reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by V. C. Kobold (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Heat transfer in engineering test reactors fuel assemblies for cycle 13 (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by V. A. Walker (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Heat transfer in the engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by V. A. Walker and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Heavy water handling experience in the SPERT II reactor facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by C. R. Montgomery and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: High pressure water loop experiments in the Materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Donald C. King (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: History and operating practices of the MTR Reactor Safeguard Committee (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by D. R. DeBoisblanc (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A hollow cathode discharge tube for isotopic analysis : progress report (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by G. W. Boyes, G. V. Wheeler, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Hydraulic flow calculations for MTR-ETR experiments : standard practices manual (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. B. VanSice (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Hydraulics of ETR-MTR capsule experiments : supplement to IDO-16368 (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by R. G. Beck (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Hydraulics of modified fuel elements for engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. G. Beck (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: IBM 650 radioactive decay utility program (PPCo-00.053) (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by A. V. Grimaud and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: ICPP waste calcining facility : safety analysis report (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. T. Lakey, J. R. Bower, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Idaho Chemical Processing Plant, Process Development Branch.. (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by W. G. Morrison and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Idaho Chemical Processing Plant technical progress report. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 1950s), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Idaho Chemical Processing Plant technical progress report : radioactive waste disposal projects. (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An improved aqueous process for zirconium alloy nuclear reactor fuels. Part I, Preliminary laboratory studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by K. L. Rohde and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An improved aqueous process for zirconium alloy nuclear reactor fuels : part II. continuous dissoltion with 5m hydrofluoric acid (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by B. J. Newby and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An improved aqueous process for zirconium alloy nuclear reactor fuels. Part II, Continuous dissolution with 5©œM hydrofluoric acid (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by B. J. Newby, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Improved sample bonding and emission with tantalum surface ionization filaments (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Paul Goris, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Improvements in materials testing reactor fuel assemblies and operating procedures (United States Atomic Energy Commission, Technical Information Service ;, 1955), also by C. F. Leyse and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The in-line analysis of electrolytic dissolver solutions for nitric acid and salt concentrations (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by D. P. Pearson and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: In-pile mechanical failure of MTR fuel assemblies (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. J. Harrison and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: In-tank irradiation facilities in the Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by A. S. Richardson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: In-tank irradiation facilities in the Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by A. S. Richardson and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: INHOUR : an IBM-7090 code for the computation of the roots of the inhour equation (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by H. A. Larson, W. A. Christenson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by L. H. Jones and L. H. Jones (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Instrument Development Branch annual report for ... (U.S. Atomic Energy Commission, Idaho Operations Office., 1964), also by U.S. Atomic Energy Commission. Idaho Operations Office and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An instrument for controlled potential electrolysis and precision coulometric integration (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Glenn L. Booman and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Instrumentation and control practices in U.S.A. reprocessing plants (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by L. A. Jobe, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An integral method for identifying neutron flux spectra (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Robert G. Nisle and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Integrated fast flux distribution in several MTR experimental facilities (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by E. Fast (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Interim report on Scoping Emergency Cooling Heat Transfer Series I and II (U.S. Atomic Energy Commission, Idaho Operations Office, 1968), also by L. G. Schlenker, W. S. Little, C. M. Moser, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Interim report on the calcination of zirconium fluoride waste solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by R. L. Hickok, J. S. Madachy, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Interim report on the development of an air pulser for pulse column application (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by M. E. Weech, D. K. MacQueen, Robert Sterling P'Pool, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Interlock control system for MTR fast chopper (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by R. J. Preston (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Investigation into distortion of power burst shape as a function of finite instrument bandwidth and initial power (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by A. A. Wasserman (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: IREKIN : program for the numerical solution of the reactor kinetics equations (U.S. Atomic Energy Commission, Idaho Operations Office, 1966), also by R. J. Wagner, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Isotopic analysis of boron as trimethyl borate (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), also by R. M. Abernathey and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Kinetic studies on the Spert I reactor. [Part] I, Initial behavior by the energy model (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by George W. Griffing and L. I. Deverall (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Laboratory development of a process for separating barium-140 from MTR fuel (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by Edward L. Anderson, C. M. Slansky, R. S. MacCormack, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Laboratory studies for Heat Transfer Reactor Experiment fuel reprocessing (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by R. D. Cannon, M. W. Roberts, K. L. Rohde, Bernice E. Paige, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Laboratory studies of the rate of removal of stainless steel ions by mercury cathode electrolysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by D. Richard Anderson, D. W. Rhodes, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Leaching of fission products from calcined process waste (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by Milton E. McLain, D. W. Rhodes, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Line voltage and noise monitor (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by T. J. Boland and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A linear least-squares fitting program for the analysis of gamma-ray spectra including a gain-shift routine (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by G. A. Cazier, R. L. Heath, D. D. Metcalf, Richard G. Helmer, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Local thermal flux distribution in SPERT III fuel elements by the spherical harmonics method (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by C. W. Reich (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Long wave neutron spectrum of the Materials Testing Reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by Lyle B. Borst, L. G. Miller, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Low cost organic moderator-coolants for nuclear reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. E. Gardner, J. C. Hillyer, W. M. Hutchinson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The low cross-section fission product poisons (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Low-energy neutron fission cross section of Pu²⁴¹ (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by T. Watanabe, O. D. Simpson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Low temperature polymorphic transformations of calcined alumina (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by R. F. Murray, D. W. Rhodes, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A machine program for calculating slow neutron scattering cross sections with application to water (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by H. L. McMurry, L. J. Gannon, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A machine program for calculating slow neutron scattering cross sections with exact averaging over molecular orientation (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by L. J. Gannon, H. L. McMurry, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Maintenance of coolants (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by J. H. Rainwater (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Maintenance of engineering test reactor coolant (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by F. C. Haas and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of analytical methods for experimental organic cooled reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by T. D. Morgan, R. C. Shank, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of mass and emission spectroscopy methods used at the Chemical Processing Plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by T. D. Morgan, G. V. Wheeler, Wayne Edward Duffy, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of preparation of analytical reagents at the chemical processing plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by M. J. Shepherd, James E. Rein, Gloria J. Harrison, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of prodecures for effective control of SS materials at Station MTI (Idaho Falls, Idaho : Phillips Petroleum Co., Atomic Energy Division, 1960., 1960), also by Fred H. Tingey, A. E. Hall, B. S. Lewis, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of radiochemical methods (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by D. G. Olson, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Manual of the analytical methods used by the Control Laboratory at the Chemical Processing Plant (U.S. Atomic Energy Commission, Technical Information Service Extension, 1963), also by U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The materials testing reactor as an irradiation facility (Idaho Operations Office, U.S. Atomic Energy Commission, 1953), also by John R. Huffman and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor automatic wire scanner (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by R. J. Preston and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor charge life with mixtures of U²³⁵ and Pu²³⁹ (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor crystal spectrometer data printing system (U.S. Atomic Energy Commission, Idaho Operations Office, 1955), also by G. L. Smith, L. G. Miller, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials Testing Reactor - Engineering Test Reactor technical branches quarterly report (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials Testing Reactor fast neutron flux measurements for cycle 146 (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by L. D. Weber, Calvin H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials Testing Reactor gamma heat generation measurements (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by L. D. Weber, Calvin H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The Materials Testing Reactor hot cell (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by M. H. Bartz and J. B. Burnham (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor hot cell tests of high pressure piping (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by M. S. Robinson, M. H. Bartz, and F. W. Rider (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor neutron flux measurements for cycle 146 (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by L. D. Weber, Calvin H. Hogg, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor shim rod calibrations (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. W. Brown and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor : structure temperatures (U.S. Atomic Energy Commission, Technical Information Service, 1956), also by G. H. Hanson, A. V. Grimaud, K. A. McCollom, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials Testing Reactor technical branches quarterly report (U.S. Atomic Energy Commission, Idaho Operations Office, 1953) (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor time-of-flight instrumentation (United States Atomic Energy Commission, Technical Information Service ;, 1954), also by D. R. deBoisblanc, K. A. McCollom, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Materials testing reactor/Engineering test reactor safeguard committee (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by R. J. Nertney (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Measurement error : identification and estimation (Phillips Petroleum Co., Atomic Energy Division, 1960), also by Fred H. Tingey and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Measurement of fission product leakage from fuel elements stored in water (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by D. W. Rhodes, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Measurement of keff by the rod drop method. I, Elementary analysis (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by H. L. McMurry and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Measurement of time jitter in BF₃ proportional counters (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by O. D. Simpson and R. G. Fluharty (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Measurements of MTR-irradiated thorium slugs in the reactivity measurement facility (U.S. Atomic Energy Commission, Technical Information Service Extension, 1956), also by E. Fast and D. R. DeBoisblanc (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A mechanical neutron filter for a crystal spectrometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by James R. Smith, H. G. Miller, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Mechanism of electroreduction of chromic ion at the mercury cathode (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), also by Milton E. McLain and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The merits of inherent shutdown vs mechanical shutdown of a plate-type, water-moderated and -reflected reactor in a runaway condition (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by F. L. Bentzen and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Metal-water reactions : rates of reaction of aluminum and aluminum-uranium alloys with water vapor at elevated temperatures (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by W. F. Zelezny and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Metallurgical examination of a melted SPERT-I type-B fuel plate (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by W. O. Schaffnit (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Method for determining the fission yield of I-135 with the reactivity measurement facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Robert G. Nisle and E. Fast (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Method for making measurements in the RMF (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Method of calculating lung dose received from a confined cloud of radioactive gas (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Dale E. Hankins, William C. King, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A method of determining the intermediate energy neutron dose (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Dale E. Hankins and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A method of determining volumes and surface areas for groups of non-uniform sized particles (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Earl S. Grimmett, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A method of estimating the kinetic effects of scram rods (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by K. V. Moore, S. R. Gossmann, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Methods for calculating large reactivity changes in the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Methods to locate sources of high activity in the materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by John F. Sommers and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Minimum risk specification limits (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Fred H. Tingey and J. A. Merrill (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Miscellaneous tests with the SPERT I reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by G. O. Bright and S. G. Forbes (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: MIST : (Multigroup Internuclear Slab Transport) (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by G. E. Putnam, D. M. Shapiro, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Mixing and evaporation in a packed vessel (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by G. K. Cederberg, J. A. Buckham, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Modification of reactor instruments compensated ion chamber power supply (U.S. Atomic Energy Commission, Technical Information Service, 1952), also by K. A. McCollom (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Modifications for the STR fuel recovery process (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by O. W. Parrett, Idaho Chemical Processing Plant. Chemical Development Branch, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Monitoring the liquid wastes discharged from the Idaho Chemical Processing Plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by William C. King and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: MTR technical branch quarterly report : for first quarter -- 1955 (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by John R. Huffman and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A multicurie facility for high level chemical process research (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by R. D. Fletcher, C. M. Slansky, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Multigroup one-dimensional spherical harmonic solutions to the Boltzmann transport equation (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by Dale Robert Metcalf and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A multilevel formula for the fission process (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by C. W. Reich and M. S. Moore (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A neutron absorption alignment chart (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Robert G. Nisle and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron diffraction studies of samples at high pressures (Idaho Falls, Idaho : U.S. Atomic Energy Commission, Idaho Operations Office, 1966., 1966), also by Robert M. Brugger, E. R. Peterson, T. G. Worlton, R. B. Bennion, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron flux distributions in the Materials Testing Reactor (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by G. O. Bright and F. Schroeder (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron flux distributions in the Materials Testing Reactor. Part II, The 5x5 loading (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by G. O. Bright (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron flux distributions in the materials testing reactor. Part III, Fuel burnout in the 3 x 9 loading (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by G. O. Bright and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron lifetime by the Rumsey method (U.S. Atomic Energy Commission, Technical Information Extension, 1955), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The neutron total cross sections of magnesium, silicon, and sulfur (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by Robert M. Brugger and R. G. Fluharty (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Neutron transmission measurements and resonance parameters in Cd (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by F. B. Simpson, R. G. Fluharty, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Niobium behavior in the lead chloride and chlorine-lead chloride systems (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. L. Teague, E. M. Vander Wall, H. T. Hahn, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Non-destructive and destructive transient tests of the SPERT I-D, fully-enriched, aluminum-plate-type core : data summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by M. R. Zeissler and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A non-destructive method for fuel assaying (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by S. G. Forbes (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A note on inverting the R-matrix (U.S. Atomic Energy Commission, Idaho Operations Office, 1966), also by T. Watanabe, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Note on the effect on reactivity of water annuli in large void spaces in the Spert-I reactor core (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by G. O. Bright and C. R. Toole (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear aspects of proposed 19-plate fuel assemblies (U.S. Atomic Energy Commission, Technical Information Service Extension, 1952), also by G. H. Hanson and H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear calcualtions for SPERT III zirconium core (U.S. Atomic Energy Commission, Technical Information Service Extension, 1956), also by G. A. Cazier and B. L. Hanson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear calculations for SPERT III (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear constants and technical references related to plutonium fuel systems (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by B. W. Johnson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear incident at the Idaho Chemical Processing Plant on January 25, 1961 : report of the investigating committee (Phillips Petroleum Company, Atomic Energy Division :, 1961), also by F. M. Warzel, Fred H. Tingey, K. K. Kennedy, Aubrey O. Dodd, R. C. Paulus, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear incident at the Idaho Chemical Processing Plant on October 16, 1959 : report of the investigating committee (Philipps Petroleum Co., Atomic Energy Division [and] U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Fred H. Tingey, Klem K. Kennedy, Aubrey O. Dodd, C. Wayne Bills, William L. Ginkel, U.S. Atomic Energy Commission. Idaho Operations Office, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear start-up of the special power excursion reactor tests II reactor with heavy-water moderator (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by J. E. Grund, R. L. Johnson, T. H. Davis, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear start-up of the SPERT IV reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. G. Crocker and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Nuclear technology branches quarterly report. (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A numerical method for computing inverse Laplace transforms (U.S. Atomic Energy Commission, Idaho Operations Office ;, 1959), also by L. A. Schmittroth and R. L. Clayton (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: On the initial shutdown of the Spert I reactor for periods greater than 50 milliseconds (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by L. I. Deverall and George W. Griffing (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Operating parameters and neutron flux profiles for MTR plutonium core (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by L. J. Harrison and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Operation of the materials testing reactor on a plutonium loading (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by D. R. deBoisblanc and R. S. Marsden (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Operational status of the engineering test reactor as of March 1, 1958 (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by J. H. Rainwater (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Operations Division. (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by S. G. Forbes, Warren E. Nyer, F. Schroeder, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Organic capsule irradiation in the MTR rabbit facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. R. McGeachin, S. Cohen, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Organic coolant degradation studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by D. G. Kuper, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Organic Coolant Reactor Program quarterly report. (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Idaho National Reactor Testing Station and Organic Coolant Reactor Program (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Organic coolant research summary report : July 1, 1960 - March 31, 1963 (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. C. Hillyer and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The organic loop in the MTR gamma facility design and preliminary test (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by W. C. Francis (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Organic reactor technology final report Oct. 1, 1962-Jan. 31, 1963 (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Parameters of high flux testing reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. J. Howerton, W. P. Conner, and G. H. Hanson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Parametric studies of fuel pin temperature response (U.S. Atomic Energy Commission, Idaho Operations Office, 1969), also by S. E. Jensen, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: PARET : a program for the analysis of reactor transients (U.S. Atomic Energy Commission, Idaho Operations Office, 1969), also by C. F. Obenchain, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The partition of uranium (VI) between tributyl phosphate and basic aluminum nitrate solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by James W. Codding and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Permissible MTR power levels with and without film boiling (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by C. F. Leyse (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Perturbation measurement of [script l/Beta]e̳f̳f̳ using a 1/v absorber (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. H. Spano, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Perturbation theory and applications (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by H. L. McMurry and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Perturbation theory and applications. [Part] I, Theoretical (U.S. Atomic Energy Commission, Idaho Operations Office, 1956), also by H. L. McMurry and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Phase transformations in alumina (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by H. J. Eding, A. G. Brown, M. L. Huggins, Stanford Research Institute, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Phase transformations in calcination of nitrates of aluminum, stainless steel, and nichrome (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by H. J. Eding, A. G. Brown, M. L. Huggins, Stanford Research Institute, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Physical and operational features of a pulsed continuous countercurrent liquid-solids contactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by E. S. Grimmett, B. P. Brown, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Physical properties of nitrate solutions of iron- and nickel-base alloy nuclear fuels (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by D. P. Pearson, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pile production of plutonium-240 from plutonium-239 irradiated under time variable flux conditions (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by R. J. Howerton (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pilot plant development studies of a continuous process for recovering uranium from nichrome fuels (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by H. V. Chamberlain, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pilot plant studies with a six-inch diameter fluidized bed calciner (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by D. R. Evans, E. S. Grimmett, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Plant tests on the decomposition of nitrous oxide over a heated rhodium catalyst (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by L. T. Lakey, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Plutonium fuel requirements for operation of the MTR (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry and B. W. Johnson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Plutonium system study with an application to the materials testing reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by Wilfrid Bennett Lewis and G. D. Marshall (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pneumatic atomizing nozzles in fluidized bed calcining. [Part] I, Calibration tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Billy Mason Legler, J. I. Stevens, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pneumatic atomizing nozzles in fluidized bed calcining. [Part] II, Process tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by Billy Mason Legler, B. P. Brown, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Polyphenyl analysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by P. W. Solomon and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Post neutron tests (U.S. Atomic Energy Commission, Technical Information Service ;, 1956), also by R. L. Doan, R. M. Wallace, F. W. Crawford, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Post-test physical, chemical and metallurgical analysis of SNAPTRAN-3 fuel (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by R. D. Fletcher, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A potentiometric study of zirconium-nitrate and zirconium-fluoride systems (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by A. J. Moffat, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Power-burst facility (PBF) conceptual design (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by A. A. Wasserman and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Pre-occupational acceptance test procedures for the Materials Testing Reactor. Part II, Post neutron tests (U.S. Atomic Energy Commission, Technical Information Service, 1952) (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Predicting excess reactivity in the ETR as a function of power-time (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. W. Henscheid, E. E. Burdick, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Preliminary evaluation of the 20% enriched uranium core for the Materials Testing Reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by D. R. DeBoisblanc and R. S. Marsden (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A preliminary report of beryllium damage observed in the MTR reflector (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. W. Dykes, J. D. Ford, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A preliminary report on the MTR crystal spectrometer (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by J. E. Evans and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Preliminary studies for a curved-crystal neutron spectrometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. R. Spencer, M. S. Moore, L. G. Miller, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Preliminary x-ray investigations of the hydrates of zirconium tetrafluoride (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by R. L. Wells and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Proceedings of the 1960 Idaho conference on reactor kinetics (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Idaho) Idaho Conference on Reactor Kinetics (1960 : Sun Valley, G. O. Bright, J. C. Haire, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Progress report on fuel element development and associated projects (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by J. M. Beeston, S. E. Craig, W. C. Francis, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Progress report on the study of irradiated thorium (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Robert G. Nisle and E. Fast (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Propane vibrational analysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by G. D. Marshall and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A proposal for an in-pile film boiling experiments in the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by C. F. Leyse (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Proposed determination of nuclear fuel burnup based on the ration of two stable fission products of the same element (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by William J. Maek, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A pyrolytic capsule design for film formation studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by E. Burroughs, W. B. Lewis, S. Cohen, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Quantitative gamma-ray spectrometric analysis of nuclide mixtures : consecutive standard sources nullification (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by D. G. Olson and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The quantitative techniques of scintillation spectrometry as applied to the calibration of standard sources (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service, 1954., 1954), also by R. L. Heath, F. Schroeder, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Quarterly progress report ... reactor projects branch. (U.S. Atomic Energy Commission, Idaho Operations Office, in the 1950s) (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Quarterly technical report : Safety Test Engineering Program project. (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Quarterly technical report : Special Power Excursion Reactor Test project. (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation damage studies of boron stainless steel : final report (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by W. O. Schaffnit (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation damage studies of boron stainless steel : interim report (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by H. T. Watanabe and W. O. Schaffnit (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation damage studies program ETR loop materials progress report (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by M. S. Robinson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation damage studies program ETR loop materials progress report II (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by M. S. Robinson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation damage studies program : ETR loop materials progress report III (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by H. T. Watanabe (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiation stability of chromium VI ions in acetate buffered solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by Robert L. Andelin, Edward L. Anderson, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radioactive decay of Pm148 and Pm148m (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by C. W. Reich and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiochemically determined ratios of asymmetric to symmetric fission of U²³³, Pu²³⁹, and U²³⁵ as a function of neutron energy (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by W. H. Burgus and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiological aspects of SNAPTRAN 2/10A-3 destructive test (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by J. R. Fielding, G. A. Dinneen, R. P. Bird, O. L. Cordes, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiometric determination of krypton-85 (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. B. Regier (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Radiometric extraction method for fluoride : pyrolysis - ion exchange separation (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by James E. Rein, M. C. Elliott, Glenn L. Booman, William J. Maeck, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Rapid two-cycle extraction method for neptunium : initial separation as neptunium (VI) with methyl isobutyl ketone (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by James E. Rein, M. C. Elliott, Glenn L. Booman, William J. Maeck, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactivity effects of Xe¹³⁵ and Sm¹⁴⁹ for the MTR with U²³⁵ and Pu²³⁹ fuels (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by B. W. Johnson and H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactivity measurements facility manual for initial startup (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by S. G. Forbes (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactivity measurements in the engineering test reactor critical facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by Earl E. Burdick and J. W. Henscheid (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor calculations on the card-programmed calculator (U.S. Atomic Energy Commission, Technical Information Service Extension, 1955), also by D. D. Dix (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor core thermocouple locations (ECOR initial core) (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. G. Young and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor physics studies for the final conceptual design of the advanced test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. W. Brown, R. S. Marsden, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor power excursion tests in the SPERT IV facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. G. Crocker, L. A. Stephan, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor power transients as calculated by the space independent reactor equations (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by K. V. Moore, W. J. Byron, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reactor stability in the Spert IV facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by L. A. Stephan, R. M. Potenza, Zoel R. Martinson, J. G. Crocker, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Recording profilometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by T. J. Boland (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reflectivity of calcite for thermal neutrons (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by M. W. Holm and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The reflectivity of NaCl and Be crystals for slow neutrons (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by M. W. Holm (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Relative neutron lifetimes in the Materials testing reactor fueled with U²³⁵ and Pu²³⁹ (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by H. L. McMurry and B. W. Johnson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The remote analytical facility model "B" pipetter (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by Fred W. Dykes, William G. Rieder, John P. Morgan, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Remote analytical facility operational experiences (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by George A. Huff and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Remote determination of fluoride in zirconium-uranium fuel processing solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by James E. Rein, Maxine C. Elliott, Glenn L. Booman, Fred W. Dykes, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Remote dissolution and analytical program for irradiated thorium (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by George A. Huff, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Removal of alloy metals from waste solutions by mercury cathode electrolysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Milton E. McLain, D. W. Rhodes, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Removal of particulates from waste calcining facility off-gas (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. D. Modrow, L. T. Lakey, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Removal of radioisotopes from solution by earth materials from eastern Idaho (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by M. W. Wilding, D. W. Rhodes, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Removal of tributyl phosphate and its degradation products from acidified uranyl nitrate solutions (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by H. T. Hahn and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Report of the SPERT I destructive test program on an aluminium, plate-type, water-moderated reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. W. Miller, Alain Sola, R. K. McCardell, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reprocessing of coated OMRE fuel (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by L. A. Decker, M. E. Jacobson, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Reprocessing uranium from the first Organic Moderated Reactor Experiment core (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by A. L. Ayers, G. J. Raab, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Research and development studies on waste storage process (Idaho Operations Office, U.S. Atomic Energy Commission, 1961), also by M. H. Ortner, P. F. Campbell, C. J. Anderson, Vitro Laboratories, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Resonance integral representations (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by Robert G. Nisle and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Results of Advanced Test Reactor sample fuel plate irradiation experiment (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by W. C. Francis, V. A. Walker, G. W. Gibson, M. J. Graber, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Review of research and development at the Idaho Chemical Processing Plant on the electrolytic dissolution of nuclear fuel (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by C. M. Slansky, H. T. Hahn, K. L. Rohde, Idaho Chemical Processing Plant. Chemical Development Branch, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Review of several models for power behavior and reactivity feedback in reactor excursion studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Richard W. Garner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A rod-type thermistor calorimeter (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by E. E. Burdick (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Routine measurement of gamma intensity (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by Calvin H. Hogg and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Routine testing and calibration procedures for multichannel pulse analyzers and gamma-ray spectrometers (Atomic Energy Division, Phillips Petroleum Co. :, 1963), also by D. F. Crouch, R. L. Heath, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Ruthenium behavior in a nitric acid scrubber (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by B. D. Withers, K. L. Rohde, B. J. Newby, Charles E. May, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Safety analysis report : snaptran 2/10A-1 safety tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. M. Waage, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Safety analysis report : SNAPTRAN 2/10A-3 water immersion tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by F. L. Bentzen, J. M. Waage, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Scattering of neutrons by gaseous molecules (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by H. L. McMurry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Scintillation spectrometry : gamma-ray catalogue (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. L. Heath (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-balancing resistivity measuring set (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by T. J. Boland, T. T. Davis, and A. W. Magnuson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-limiting excursion tests of a highly enriched plate-type D₂O-moderated reactor. Part I, Initial test series (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. E. Grund and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-limiting excursion tests of a highly enriched plate-type D₂O-moderated reactor. Part II, Effect of system pressure (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. L. Johnson, J. E. Grund, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-limiting excursion tests of a highly enriched plate-type D₂O-moderated reactor. Part III, Effect of system temperature (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. C. Schmitt, J. E. Grund, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-limiting excursion tests of the SPERT II highly enriched plate-type D₂O-moderated reactor. Part IV, Data summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by V. W. Goldsberry and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Self-limiting power excursion tests of a water-moderated low-enrichment UO₂ core in SPERT I (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by A. H. Spano and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Separation and purification of a gram of protactinium-233 (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by James W. Codding and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Separation of nitrate and aluminum from radioactive chemical wastes (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by John B. Huff and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Separation of uranium from diverse ions : study of the hexone liquid-liquid extraction system (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by James E. Rein, Maxine C. Elliott, Glenn L. Booman, William J. Maeck, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Series electrolytic dissolver for nuclear fuels. [Part] I, Scoping studies (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by M. R. Bomar, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Shielding requirements for experiments ANL 2 and KAPL 2 (U.S. Atomic Energy Commission, Technical Information Service, 1952), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Shielding requirements for shipment of metallurgical samples (U.S. Atomic Energy Commission, Technical Information Service Extension, 1953), also by Lee H. Boyer (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Shutdown reactivity by the modified rod drop method (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by K. V. Moore and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Silver spark spectrographic analysis of high purity water (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by G. W. Dickinson, G. V. Wheeler, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Slow neutron inelastic scattering from aluminum powder (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by Robert M. Brugger, P. D. Randolph, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Slow neutron inelastic scattering from low temperature gaseous methane, liquid methane and solid methane (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by Y. D. Harker, Robert M. Brugger, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Slow neutron scattering studies of liquid and solid argon (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by P. D. Randolph, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SNAPTRAN 2/10A-3 destructive test results (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by George F. Brockett, R. D. Fletcher, G. A. Dinneen, O. L. Cordes, W. E. Kessler, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Sodium fluozirconate precipitation process for zirconium fuels. Part I, Laboratory development (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by B. J. Newby, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Solids flow control for a pulsed solids-liquid contactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by E. S. Grimmett, Noel De Nevers, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The solubility of zirconium tetrafluoride in nitric acid from 0 to 80° C (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by A. G. Chapman, C. M. Slansky, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Some methods of calculation of the parameters in the reactor kinetics equations (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by G. E. Putnam and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Some uses of time of flight techniques in conjunction with a neutron crystal spectrometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by R. R. Spencer, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Source strength information for shielding and stack effluent calculations : a standard practices guide (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by L. H. Jones and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Test II reactor facility preliminary design report (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by T. R. Wilson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Test III reactor facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by R. E. Heffner, T. R. Wilson, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Test III reactor facility preliminary design report (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by T. R. Wilson (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Test program review (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Warren E. Nyer, S. G. Forbes, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Tests III pressurizer vessel failure (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by K. R. Hoopingarner, W. W. Hickman, D. P. Halls, T. R. Wilson, R. E. Heffner, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Tests IV facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by R. E. Heffner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Special Power Excursion Reactor Tests IV hazards summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by F. L. Bentzen, J. G. Crocker, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Spectrographic determination of impurities in hafnium (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by B. E. Ginther, G. V. Wheeler, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Spectrophotometric determination of uranium in highly impure solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Robert B. Kimball, James E. Rein, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Spectrophotometric study of the ternary system, aluminum nitrate-nitric acid-water : application to analysis (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by Robert W. Henry, Glenn L. Booman, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Spent fuel element activity and core burnup distribution from the Materials Testing Reactor plutonium core loading (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by J. M. Waage (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT I destructive test program safety analysis report (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by A. H. Spano, R. W. Miller, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT-I instrumentation (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by F. L. Bentzen (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT I low-enrichment oxide core destructive test program safety analysis report (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by J. E. Grund, B. E. Norton, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT II hazards summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by G. O. Bright and J. E. Grund (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT II reactor facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by C. R. Montgomery and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT III hazards summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by F. Schroeder (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The SPERT III reactor nuclear startup (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by R. A. Zahn, C. R. Toole, W. J. Neal, and F. Schroeder (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: SPERT III spun cast pipe experience (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. G. Gale and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Spherical harmonic methods in slab geometry (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by Dale Robert Metcalf and Gail Allan Cazier (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Stability analysis of the engineering test reactor with reactivity feedback through the temperature coefficient (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by S. R. Gossmann (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Stability and transient analysis of the EOCR (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by S. R. Gossman, F. K. Hyer, K. V. Moore, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Stability tests with the Special Power Excursion Reactor Test-I reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by F. Schroeder (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Standard practices for design of Materials testing reactor and Engineering test reactor safety circuits (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by L. H. Jones and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A standard practices guide for hazard analysis of experimental systems (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. J. Nertney (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Standard practices guide for writing experimental operating manuals (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by J. D. Ford and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Startup operation of a production facility for separating barium-140 from MTR fuel (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by R. A. Robinson, P. N. Kelly, S. F. Fairbourne, Billy Mason Legler, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Statistical analysis of MTR fuel element nno-destructive assay data (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by F. H. Tingey and F. P. Vance (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A statistical determination of the reduced prompt neutron generation time, [lambda]/[beta], in the SPERT IV reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by Roger Lee Johnson and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Status report on studies of uranium-aluminum alloy dissolution to a DIBAN dissolver product (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by Robert L. Andelin, C. M. Slansky, Fred H. Tingey, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Steam stripping TBP-Amsco solutions from non-volatile contaminants (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by C. R. Ford, H. V. Chamberlain, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A study of the feasibility of a small scale reprocessing plant for the Dresden Nuclear Power Station (Idaho Operations Office, U.S. Atomic Energy Commission, 1961), also by H. Schneider, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Subcooled transient tests in the SPERT-I reactor : experimental data (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by J. C. Haire (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Successive neutron capture in Tb¹⁵⁹ (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by R. R. Smith, R. H. Lewis, S. D. Reeder, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Summary data report for SPERT transient pressure measurements in the interval 1955 to 1961 (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by G. F. Brockett, E. Feinauer, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Summary of the 1962 fuel element fission break in the Materials Testing Reactor (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by J. W. Dykes, K. R. Hoopingarner, J. D. Ford, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Summary of the Spert-I, -II, and -III reactor facilities (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), also by C. R. Montgomery, T. R. Wilson, J. A. Norberg, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Supplement to Standard practices for design of Materials testing reactor and Engineering test reactor safety circuits (Idaho Operations Office, U.S. Atomic Energy Commission, 1958), also by L. H. Jones and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A survey of the Materials Testing Reactor shield (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by E. Fast, J. W. McCaslin, and J. P. Byrom (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: System for processing reactor transient data (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by B. J. Power, S. O. Johnson, R. N. Hagen, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Tables of reactivity vs. period for U²³⁵, Pu²³⁹, and U²³³ (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by K. V. Moore (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Tabulation of the Pa²³¹ total neutron cross sections (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by F. B. Simpson, W. H. Burgus, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Temperature and stress formulae for cylinders with heat generated in the material (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by C. F. Leyse and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Temperature coefficient of the MTR at 30 megawatts (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by W. J. Byron and J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Temperature coefficients of the reactivity measurement facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by E. Fast and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Temperature controller (U.S. Atomic Energy Commission, Technical Information Service, 1954), also by G. L. Smith and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Temperature distribution in a fuel plate with exponentially rising power. Part I, Theoretical (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by H. L. McMurry (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Ternary fission of ²³⁵U induced by neutrons of energy below 1 eV (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), also by L. G. Miller, M. S. Moore, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Test reactors meeting for industry : Idaho Falls, Idaho, May 13-15,1959. (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by Idaho) Test Reactors Meeting for Industry (1959 : Idaho Falls and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Testing of pumps for use in nitric acid-alumina slurry service (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by E. J. Bailey, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Tests of a vapor-space feed nozzle for calcining aluminum nitrate solutions in a fluidized bed (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by G. E. Lohse, F. M. Stephens, J. E. Hanway, G. R. Smithson, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Theory of power transients in the SPERT I reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by R. S. Margulies, Garrett Birkhoff, W. A. Horning, H. C. Corben, and Ramo-Wooldridge Corporation (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Theory of power transients in the SPERT I reactor : final report (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by W. A. Horning, H. C. Corben, and Ramo-Wooldridge Corporation (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal conductivity of alumina produced by the fluidized bed process (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Paul N. Kelly, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal decomposition of hydrated iron, chromium, and nickel nitrates and their mixtures (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by E. M. Vander Wall, Idaho Chemical Processing Plant, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal neutron activation cross section of Np²³⁷ (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by R. H. Lewis, N. P. Alley, T. O. Passell, R. R. Smith, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal neutron cross sections of the Co⁵⁸ isomers and the effect on fast flux measurements using nickel (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Calvin H. Hogg, E. Carson Yates, L. D. Weber, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal neutron flux distribution in the horizontal through facility in the materials testing reactor. Part III (U.S. Atomic Energy Commission, Technical Information Extension, 1955), also by G. O. Bright and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal neutron flux measurement at the MTR-ETR site (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), also by Calvin H. Hogg and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermal stability of gadolinium nitrate solution at high temperature (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), also by John-Franklin Koenig and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Thermocouple attachment for the initial EOCR core (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by D. R. Conkling, T. L. Rasmussen, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Three and two group constants for a SPERT III core (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), also by Dale Robert Metcalf and Robert Haldin (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Time of flight correction for detector thickness in the Materials testing reactor fast chopper time analyzer (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by B. G. Nelson and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Topic : a fortran program for calculating transport of particles in cylinders (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by G. E. Putnam, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The total neutron cross section of 115-day Ta-182 below 3.0 eV (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by G. E. Stokes and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A transfer function for D.C. operational amplifiers with generalized external networks (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by S. R. Gossmann and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transfer functions of heat exchangers and heat exchange processes applicable to nuclear reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by S. R. Gossmann (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient response of the Engineering test reactor primary water temperature controller (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by W. J. Byron and S. R. Gossmann (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient temperature distributions in the SPERT I D-12/25 fuel plates during short-period power excursions (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by J. E. Houghtaling, Alain Sola, A. H. Spano, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient tests of the BSR-II core in the SPERT I facility (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by L. A. Stephan and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient tests of the fully enriched, aluminum plate-type, B cores in the Spert I reactor : data summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by A. P. Wing and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient tests of the fully enriched, stainless steel plate-type, P core in the Spert I reactor : data summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by A. P. Wing and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Transient tests of the SPERT I low-enrichment UO₂ core : data summary report (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. Scott, R. C. Schmitt, A. A. Wasserman, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A transistorized bidirectional decade counter (U.S. Atomic Energy Commission, Idaho Operations Office, 1965), also by K. D. Smith, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: A transport study of the neutron flux, adjoint, and importance for the advanced reactivity measurement facility-II (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by N. C. Kaufman and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Tributyl phosphate extraction of uranium from ammonium nitrate solutions (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), also by R. A. Kent, K. L. Rohde, U.S. Atomic Energy Commission. Idaho Operations Office, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: The tunnel diode as a fast discriminating switch (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by Clayton Miller and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An ultrasonic anemometer for measuring steam convection currents (U.S. Atomic Energy Commission, Idaho Operations Office, 1969), also by Alvin E. Arave, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Ultrasonic channel measuring system (U.S. Atomic Energy Commission, Idaho Operations Office, 1969), also by Alvin E. Arave, Idaho National Reactor Testing Station, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: An ultraviolet spectrophotometric determination of uranium (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by Bernice E. Paige, James E. Rein, Maxine C. Elliott, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Unitized microfilm system for engineering drawings of Idaho Operations Office, USAEC and its contractors (Idaho Operations Office, U.S. Atomic Energy Commission, 1962), also by Richard G. Masterson, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Uranium determination by the isotope dilution technique (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), also by Wayne Edward Duffy, Fred H. Tingey, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Uranium determination by the isotope dilution technique. II (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), also by Paul Goris, Fred H. Tingey, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Uranium fission stoichiometry (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), also by F. P. Vance and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Use of "Binal" in reactor control rods (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), also by R. E. Heffner and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Venturi scrubber evaluation for waste calcination off-gas facilities (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), also by B. R. Wheeler (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Vibrational analysis of unfired horizontal bayonet tubes in a fluidized bed calciner (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), also by S. D. Anderson, G. W. Hirschi, and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Weighing functions for calculating reactivity perturbations in the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1953), also by J. W. Webster (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Weighting functions for calculating reactivity perturbations in the MTR (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by J. W. Webster and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Xenon-135 generation in the materials testing reactor (U.S. Atomic Energy Commission, Technical Information Service, 1955), also by D. R. deBoisblanc, W. E. Nyer, and U.S. Atomic Energy Commission (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Xenon-135 induced instabilities of the neutron flux in nuclear reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), also by Gary Marlin Sandquist and Idaho National Reactor Testing Station (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Zirconium extraction by tributyl phosphate (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), also by R. L. Hickok, R. D. Cannon, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
Phillips Petroleum Company. Atomic Energy Division: Zirconium processing capability of the Idaho Chemical Processing Plant (Idaho Operations Office, U.S. Atomic Energy Commission, 1964), also by J. R. Bower, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)

Find more by Phillips Petroleum Company. Atomic Energy Division at your library, or elsewhere.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.