The Online Books Page

Production planning -- Data processing

See also what's at your library, or elsewhere.

• Production planning
• Production engineering -- Data processing
• Data processing

• Automated Program Planning and Documentation Module (APPDM) : test version 1.10 (The Division, 1991), by Defense Systems Management College. Deliberation Support Division (page images at HathiTrust)
• Short-term planning : an interactive modeling approach (Management Information Systems Research Center, Graduate School of Business Administration, University of Minnesota, 1971), by Peter Mevert, Gary W. Dickson, University of Minnesota. Management Information Systems Research Center, and Germany) International Symposium on Model and Computer-Based Corporate Planning (1972 : Cologne (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Creating Breakthrough Products (special second edition; Pittsburgh: ETC Press, c2020), by Jonathan Cagan and Craig M. Vogel (PDF with commentary at CMU)
• Managing quality and productivity in aerospace and defense. (Defense Systems Management College ;, 1989), by Virginia Polytechnic Institute and State University and Defense Systems Management College (page images at HathiTrust)
• On the design of hierarchical production planning systems (Massachusetts Institute of Technology, Operations Research Center, 1976), by Gabriel Richard Bitran and Arnoldo Cubillos Hax (page images at HathiTrust)
• Étude sur l'état de la production indigène en Algérie (Louis Marle, 1864), by N. Seignette (page images at HathiTrust)
• Production planning, real interest rates, and inventory investment (National Income Section, Wages, Prices, and Productivity Section, Division of Research and Statistics, Board of Governors of the Federal Reserve System, 1984), by Che S. Tsao (page images at HathiTrust)

• Innovative approaches to planning, scheduling and control : proceedings of a workshop held at San Diego, California, November 5-8, 1990 (Morgan Kaufmann, 1990), by Scheduling Workshop on Innovative Approaches to Planning, Katia Sycara, and United States. Defense Advanced Research Projects Agency. Information Science and Technology Office (page images at HathiTrust)

• Integrating industrial preparedness into the acquisition process : a guide for program managers. (Defense Systems Management College ;, 1989), by John F. Starns, Analytic Sciences Corporation, and Defense Systems Management College (page images at HathiTrust)

• The introduction of feedback into a hierarchical production planning system (Massachusetts Institute of Technology, Operations Research Center, 1980), by Stephen C. Graves (page images at HathiTrust)
• Short-term planning : an interactive modeling approach (Management Information Systems Research Center, Graduate School of Business Administration, University of Minnesota, 1971), by Peter Mevert, Gary W. Dickson, University of Minnesota. Management Information Systems Research Center, and Germany) International Symposium on Model and Computer-Based Corporate Planning (1972 : Cologne (page images at HathiTrust)

• Management Science Letters (2011-) (partial serial archives)

• Knowledge acquisition at work (Institute on Education and the Economy,Teachers College, Columbia University, 1991), by Sylvia Scribner, Patricia Sachs, Jessica Kindred, and Lia Di Bello (page images at HathiTrust)

• Knowledge acquisition at work (Institute on Education and the Economy,Teachers College, Columbia University, 1991), by Sylvia Scribner, Patricia Sachs, Jessica Kindred, and Lia Di Bello (page images at HathiTrust)

• Computer Integration of Engineering Design and Production: A National Opportunity, by National Research Council Committee on the CAD/CAM Interface (page images with commentary at NAP)
• Computer-aided industrial process design : the Aspen project (Dept. of Energy ;, 1977), by Massachusetts Institute of Technology. Department of Chemical Engineering, Massachusetts Institute of Technology. Energy Laboratory, United States. Energy Research and Development Administration, and United States. Department of Energy (page images at HathiTrust)

• Computer Integration of Engineering Design and Production: A National Opportunity, by National Research Council Committee on the CAD/CAM Interface (page images with commentary at NAP)
• Engineering and the Advancement of Human Welfare: 10 Outstanding Achievements, 1964-1989, by National Academy of Engineering (page images with commentary at NAP)
• CAD-CAM techniques to a shipyard sheet metal shop (U.S. Dept. of Transportation, Maritime Administration ;, 1986), by Harry Hooper, National Shipbuilding Research Program, Avondale Industries. Shipyards Division, and United States Maritime Administration (page images at HathiTrust)
• Computer procurement : information on Defense Department's CAD/CAM acquisitions : fact sheet for the Chairman, Subcommittee on Defense, Committee on Appropriations, House of Representatives (The Office, 1989), by United States General Accounting Office and United States. Congress. House. Committee on Appropriations. Subcommittee on Dept. of Defense (page images at HathiTrust)
• Description of MSFC engineering photographic analysis (National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by Jim Earle and Frank Williams (page images at HathiTrust)
• A rule based computer aided design system (U.S. National Aeronautics and Space Administration, 1986), by Timothy Premack and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Shape Interrogation for Computer Aided Design and Manufacturing (hyperbook edition, 2009), by N. M. Patrikalakis, Takashi Maekawa, and Wonjoon Cho (illustrated HTML at MIT)

• Robotics programs (National Center for Research in Vocational Education, 1983), by William L. Ashley (page images at HathiTrust)

• A Competitive assessment of the U.S. computer-aided design and manufacturing Systems industry (U.S. Dept. of Commerce, International Trade Administration :, 1987), by United States. International Trade Administration. Capital Goods and International Construction Sector Group (page images at HathiTrust)

• CAD/CAM (Computer Aided Design/Computer Aided Manufacture) : a brief guide to materials in the Library of Congress (Science Reference Section, Science and Technology Division, Library of Congress, 1985), by George D. Havas and Library of Congress. Science and Technology Division. Reference Section (page images at HathiTrust)

• Microcomputer applications in manufacturing (Wiley, 1989), by Ali Galip Ulsoy and W. R. DeVries (page images at HathiTrust)
• Manufacturing technology : a changing challenge to improved productivity : report to the Congress (Washington : U.S. General Accounting Office, [1976], 1976), by United States General Accounting Office (page images at HathiTrust)

• CAD-CAM techniques to a shipyard sheet metal shop (U.S. Dept. of Transportation, Maritime Administration ;, 1986), by Harry Hooper, National Shipbuilding Research Program, Avondale Industries. Shipyards Division, and United States Maritime Administration (page images at HathiTrust)

• CAD-CAM techniques to a shipyard sheet metal shop (U.S. Dept. of Transportation, Maritime Administration ;, 1986), by Harry Hooper, National Shipbuilding Research Program, Avondale Industries. Shipyards Division, and United States Maritime Administration (page images at HathiTrust)

• CAD-CAM techniques to a shipyard sheet metal shop (U.S. Dept. of Transportation, Maritime Administration ;, 1986), by Harry Hooper, National Shipbuilding Research Program, Avondale Industries. Shipyards Division, and United States Maritime Administration (page images at HathiTrust)

• A graphically-programmed, microprocessor-based industrial controller (Dept. of Computer Science, University of Illinois at Urbana-Champaign, 1977), by Alfred C Weaver (page images at HathiTrust)
• VIPTRAN2 : an improved programming language and its compiler for process control equations (Dept. of Computer Science, University of Illinois at Urbana-Champaign, 1974), by Alfred Charles Weaver (page images at HathiTrust)
• VIPTRAN--a programming language and its compiler for Boolean systems or process control equations. (Dept. of Computer Science, University of Illinois at Urbana-Champaign, 1973), by Alfred Charles Weaver (page images at HathiTrust)
• A generalized computer program for flowsheet calculation and process data reduction (Argonne National Laboratory, Chemical Engineering Division, 1966), by G. J. Vogel, I. E. Knudsen, L. J. Anastasia, Peter George Alfredson, Lowell B. Koppel, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)

• Year 2000 issues : technology problems and industrial chemical safety : report to the Senate Special Committee on the Year 2000 Technology Problem (Chemical Safety and Hazard Investigation Board, 1999), by United States. Chemical Safety and Hazard Investigation Board (page images at HathiTrust)

• WRAP, a model for regional solid waste management planning : a programmer's manual. (Environmental Protection Agency, Office of Solid Waste Management Programs, System Management Division, 1977), by Mitre Corporation, United States. Office of Solid Waste Management Programs, and United States Environmental Protection Agency (page images at HathiTrust)

• Normal and reverse English word list ([Philadelphia?] : University of Pennsylvania, [1963], 1963), by Augustus F. Brown, United States. Air Force. Office of Scientific Research, and University of Pennsylvania (page images at HathiTrust)
• Processing guide for mental hospital data (U.S Department of Health, Education, and Welfare, Public Health Service, 1963), by National Institutes of Health (U.S.) and Philip H. Person (page images at HathiTrust)
• System definition report for the National Driver Register Design Study. Interim report. (1977), by D. Odell Hamilton (page images at HathiTrust)
• NDR rapid response system support service. Interim report. (1977), by W. E. Nickel, G. Sieracki, J. Wood, and Richard L. Deal (page images at HathiTrust)
• Development of a data link from PDP 11/34 computer to HP 9830 calculator. Final report. (1980), by H. Hemami and Scott L. Hendricks (page images at HathiTrust)
• Development and testing of a link from HP calculator to PDP11. Final report. (1981), by H. Hemami and Scott L. Hendricks (page images at HathiTrust)
• Instrumentation for measuring pavement-vehicle interaction. Volume I: system description, operation, calibration and maintenance manual. Final report. (1981), by A. A. Blauvelt, R. H. Klien, and R. A. Peters (page images at HathiTrust)
• Instrumentation for measuring pavement-vehicle interaction. Volume II: Digalog Systems operation and maintenance manual, data acquisition system, model DLI 203. Final report. (1981), by A. A. Blauvelt, Richard H. Klein, and R. A. Peters (page images at HathiTrust)
• Requirements report - computer software system for a semi-automatic pipe handling system and fabrication facility. (1980) (page images at HathiTrust)
• Feasibility study of semi-automatic pipe handling system and fabrication facility. (1978) (page images at HathiTrust)
• DDGX guided missile destroyer concept design - DDGX producibility study no. 4: shipboard data multiplex system (SDMS). (1981) (page images at HathiTrust)
• Roadside Safety Library - library information retrieval system (LIRS). Volume 1: user's manual. Final report. (1987), by Sudhamay Basu and Arun Chatterjee (page images at HathiTrust)
• Roadside Safety Library - Library Information Retrieval System (LIRS). Volume 2: programmers' and operators' manual. Final report. (1987), by Arun Chatterjee and Sudhamay Basu (page images at HathiTrust)
• Waveform generator signal processing software. Final report. (1988) (page images at HathiTrust)
• Model Minimum Uniform Crash Criteria (MMUCC). (1998) (page images at HathiTrust)
• Geographic information systems using CODES linked data (Crash Outcome Data Evaluation System). (2001), by Karl Kim, Timothy J. Kerns, Tom Hettinger, Mary Pease, Sandra W. Johnson, and Dennis Utter (page images at HathiTrust)
• Guide to reporting highway statistics: procedures for the compilation, analysis and reporting of: state motor-fuel, motor-vehicle, driver-license and motor-carrier data; highway finance data of state and local governments. (2000) (page images at HathiTrust)
• [Intelligent Transportation Systems as a data resource: preliminary requirements for a user service] (1998), by Richard A. Margiotta (page images at HathiTrust)
• Standardization of Work Measurement. Volume 2, Clerical and Sales Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust)
• Distributed educated throat stability bypass to increase the stable airflow range of a Mach 2.5 inlet with 60-percent internal contraction (National Aeronautics and Space Administration ;, 1974), by Robert J. Shaw, Bobby W. Sanders, Glenn A. Mitchell, and Lewis Research Center (page images at HathiTrust)
• On increasing the effective aperture of antennas by data processing (University of Illinois, 1962), by Robert H. MacPhie and ILLINOIS UNIV URBANA ELECTRICAL ENGINEERING RESEARCH LAB. (page images at HathiTrust)
• Tree measurement data by hand or computer (Northern Forest Experiment Station, Forest Service, U.S. Dept. of Agriculture, 1964), by Paul M. Haack and Alaska) Northern Forest Experiment Station (Juneau (page images at HathiTrust)
• A Study of Precipitation Occurrence Using Visual and Infrared Satellite Data. (Defense Technical Information Center, 1983), by Paul,L S and NAVAL POSTGRADUATE SCHOOL MONTEREY CA. (page images at HathiTrust)
• Compilation, evaluation and production of nuclear data for reactor calculations (Downey, California : North American Aviation, Inc., Atomics International, 1966., 1966), by Harry Alter, Charles L. Dunford, North Amercian Aviation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Linear operators for data processing (Wright-Patterson Air Force Base, Ohio : Navigation & Guidance Laboratory, Aeronautical Systems Division. Air Force Systems Command, United States Air Force, 1962., 1962), by Ralph E. Lane, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command (page images at HathiTrust)
• Engineering services to store materials information data on magnetic memory tapes (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Loren F. Johnson, Howard W. Smith, United States. Air Force. Systems Command. Aeronautical Systems Division, and Boeing Company. Wichita Division (page images at HathiTrust)
• Computer simulation of joist deflections in the floor of a factory-manufactured house (Michigan State University, Agricultural Experiment Station, 1973), by Alan Sliker and Stanley Woell (page images at HathiTrust)
• Image Analysis Facility : an interactive digital computer system (L.G. Hanscom Field, Massachusetts : Air Force Cambridge Research Laboratories, Air Force System Command, United States Air Force, 1972., 1972), by Arthur P. Ginsburg, John C. Mott-Smith, Floyd H. Cook, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Advanced modeling and system parameter identification through minimal dynamic stimulation and digital signal processing (Eglin Air Force Base, Florida : Air Force Research Laboratory, Munitions Directorate, 2014., 2014), by Anthony J. Hébert, Paul R. Mackin, United States. Air Force. Material Command, and United States. Air Force. Eglin Air Force Base (page images at HathiTrust)

More items available under broader and related terms at left.